Dorel WM31205K User manual

Model No:
WM31205K
UPC CODE:
NOTE:
THIS INSTRUCTION BOOKLET
CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND
KEEP FOR FUTURE REFERENCE.
Lot number:
(TAKEN FROM CARTON)
___________________
_______ / _______ / _______
DOREL ASIA
0-65857-16567-8
Date of purchase:
LINEN HEADBOARD WITH
NAILHEADS - KING
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [email protected]
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]

*
*
*
*
*
*
*
*
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service
representative first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product model
number, color and a detailed description of the part.
E-MAIL: [email protected]
NOTES
Ensure all parts and components are present before beginning assembly.
Assembly and handling will require two people.
Customer Service Department No. 413
12345 Albert-Hudon Boulevard, Suite 100
Montreal, Quebec
Canada H1G 3L1
Estimated assembly time: 15 minutes.
The bed frame is not included and must be purchased separately.
CARE AND CLEANING
Assemble on a soft, smooth surface to prevent damage to the product finish.
Read all instructions completely before assembly.
DO NOT use power tools.
CAUTION: Adult assembly required.
WARNING: Should this product become damaged,
and/or components are broken or missing, DO NOT USE.
Dorel Asia warrants its product to be free from defects in material and workmanship and agrees to
remedy any such defect. This warranty covers 1 year from the date of original purchase. This
warranty is valid only upon presentation of proof of purchase. This is solely limited to the repair
or replacement of defective furniture components and no assembly labor is included. This warranty
does not apply to any product which has been improperly assembled, subjected to misuse or abuse
or which has been altered or repaired in any way. Any wearing, tearing or fading of the fabric is
not covered under the warranty. This warranty gives you specific legal rights and you may also
have other rights which vary from State to State.
Dust regularly with a soft, dry cloth to prevent soil build-up. Wipe away spills immediately to
prevent staining. Use a cloth dampened with water or a professional product to clean the fabric.
Always test an inconspicuous area first. Allow upholstery to dry and brush lightly. Keep away
from heat to avoid glazing, melting or scorching.
MAINTENANCE
Check bolts/screws periodically and tighten them if necessary.
LIMITED WARRANTY

HARDWARE LIST
1 2 3
4 5 6
7
LINEN HEADBOARD WITH NAILHEADS - KING
WM31205K
Ø5/16" X 2-1/4"
Ø22 X 1.8mm
Ø16 X 1.2mm
HEX SOCKET HEAD BOLT
FLAT WASHER
SPRING WASHER
8 PCS
16 PCS
12 PCS
Ø5/16" X 2-1/2"
Ø5/16"
M5 X 64mm
HEX SOCKET HEAD BOLT
NUT
ALLEN KEY
WRENCH
1 PC
4 PCS
4 PCS
1 PC
FLAT HEAD SCREW
4 PCS
HEX SOCKET HEAD BOLT
6 PCS
HEX SOCKET HEAD BOLT
4 PCS
ALLEN KEY
1PC
SPRING WASHER
10 PCS
FLAT WASHER
10 PCS
4
13
2
56
HARDWARE LIST
Φ8mm x Φ16mm Φ8mm x Φ14mm
Φ8mm x Φ95mm Φ8mm x Φ70mm
FLAT HEAD SCREW
4 PCS
HEX SOCKET HEAD BOLT
6 PCS
HEX SOCKET HEAD BOLT
4 PCS
ALLEN KEY
1PC
SPRING WASHER
10 PCS
FLAT WASHER
10 PCS
4
13
2
56
HARDWARE LIST
Φ8mm x Φ16mm Φ8mm x Φ14mm
Φ8mm x Φ95mm Φ8mm x Φ70mm

PARTS LIST
A B
HEADBOARD BODY
LEG
1 PC
2 PCS
LINEN HEADBOARD WITH NAILHEADS - KING
WM31205K
NOTE: LEGS (B) ARE PACKED INSIDE THE HEADBOARD
BODY (A). PULL BACK THE FABRIC LINING BEHIND
THE HEADBOARD BODY TO COLLECT ALL PARTS.

STEP 1:
Place all parts on a clean, smooth surface.
NOTE-
Attach legs (B) using the top and middle holes
on the legs to make the headboard higher.
Attach legs (B) using the middle and bottom holes
on the legs to make the headboard lower.
Attach legs (B) to headboard body (A) with hex socket head bolts (1), flat washers (2) and spring
washers (3). Use Allen Key (6) to tighten the bolts.
LINEN HEADBOARD WITH NAILHEADS - KING
WM31205K
Pull back the fabric lining on the back of the headboard body (A) to collect legs (B). Then place the
fabric lining back into place.
The headboard height can be adjusted to different heights. Select the desired height before
attaching legs (B) to headboard body (A).
①②③
B
A
B
A
B
B
A
B
B
B
B
A
FLAT HEAD SCREW
4 PCS
HEX SOCKET HEAD BOLT
6 PCS
HEX SOCKET HEAD BOLT
4 PCS
ALLEN KEY
1PC
SPRING WASHER
10 PCS
FLAT WASHER
10 PCS
4
13
2
56
HARDWARE LIST
Φ8mm x Φ16mm Φ8mm x Φ14mm
Φ8mm x Φ95mm Φ8mm x Φ70mm

LINEN HEADBOARD WITH NAILHEADS - KING
WM31205K
NOTE: THE BED FRAME IS NOT INCLUDED AND MUST BE
PURCHASED SEPARATELY. THE FOLLOWING
ILLUSTRATIONS ARE FOR REFERENCE ONLY.
Attach the bed frame (purchased separately) to the legs using hex socket head bolts (4), spring
washers (3), flat washers (2) and nuts (5). Use Allen Key (6) to tighten bolts and use the open
wrench (7) to tighten the nuts (5).
②
④
⑤③
FLAT HEAD SCREW
4 PCS
HEX SOCKET HEAD BOLT
6 PCS
HEX SOCKET HEAD BOLT
4 PCS
ALLEN KEY
1PC
SPRING WASHER
10 PCS
FLAT WASHER
10 PCS
4
13
2
56
HARDWARE LIST
Φ8mm x Φ16mm Φ8mm x Φ14mm
Φ8mm x Φ95mm Φ8mm x Φ70mm

LINEN HEADBOARD WITH NAILHEADS - KING
WM31205K
CAUTION: This unit is intended for use only with the
products and/or maximum weights indicated. Use with other
products and/or products heavier than the maximum weights
indicated may result in instability or cause possible injury.
Dust regularly with a soft, dry cloth to
prevent soil build-up. Wipe away spills
immediately to prevent staining. Use a
cloth dampened with water or a
professional product to clean the fabric.
Always test an inconspicuous area first.
Allow upholstery to dry and brush lightly.
Keep away from heat to avoid glazing,
melting or scorching.
That's it! You've finished assembling your headboard.
DO NOT RETURN PRODUCT TO THE STORE.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: [phone]
E-Mail: [e-mail]
Fax #: [phone]
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
DO NOT RETURN PRODUCT TO STORE
E-MAIL:[e-mail]

MODEL #: WM31205K
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE CONTACT CUSTOMER SERVICE REPRESENTATIVES AT THE FOLLOWING
NUMBERS SHOULD THERE BE ANY MISSING OR DEFECTIVE PART(S).
Customer Service Phone Number 1-800-295-1980
Customer Service Fax Number 514-353-7819
Request Date:
Name:
Shipping Address:
Street & Number:
City & State:
Zip Code:
Day Time Phone Number:
(including area code)
Date & Place of Purchase:
Part(s) description and quantity (Please be sure to list model number or SKN number):
Customer Service
Customer Service Representative Mailing Address:
Customer Service Department No. 413, 12345 Albert-Hudon Boulevard, Suite 100, Montreal, QC, Canada, H1G 3L1
Email: [email protected]
C
E
A
B
B
B