Doss DMZ50IP User manual

i
1080P HD IP IR PTZ Camera
Operation manual
Before installation, please read the operation manual carefully and confirm the device model an
d input power correctly.

i
Contents
1. Introduction...........................................................................................................................................................1
Features............................................................................................................................................................ 1
2. Hardware Installation.......................................................................................................................................... 2
System requirement........................................................................................................................................ 2
Installation environment..................................................................................................................................2
Installation environment requirements................................................................................................. 2
Recommend operating environment.................................................................................................... 2
Hardware installation steps.................................................................................................................... 2
Network connection.................................................................................................................................3
Connection instruction.................................................................................................................................... 4
3. Operating Guide for Network High Speed Dome...........................................................................................5
Set the IE Browser...........................................................................................................................................5
Download and Install ActiveX........................................................................................................................ 6
Login.................................................................................................................................................................. 8
Live view............................................................................................................................................................9
System specification setting.........................................................................................................................14
System.....................................................................................................................................................14
Basic info.........................................................................................................................................14
User manage.................................................................................................................................. 19
Serial................................................................................................................................................20
Record............................................................................................................................................. 21
Time zone....................................................................................................................................... 23
TF status......................................................................................................................................... 24
AV............................................................................................................................................................. 25
Video channels...............................................................................................................................25
Video parameters.......................................................................................................................... 26
Video cover..................................................................................................................................... 27
Shot parameters............................................................................................................................ 28
Network................................................................................................................................................... 29
Ethernet...........................................................................................................................................29
DDNS...............................................................................................................................................30
Netport.............................................................................................................................................31
Other protocol.................................................................................................................................32
Alarm configuration(Simple camera doesn't contain alarm function)............................................ 33
Alarm conf.......................................................................................................................................33
Linkage............................................................................................................................................ 35
IO alarm...........................................................................................................................................36
Motion.............................................................................................................................................. 37
Local........................................................................................................................................................ 38
Local................................................................................................................................................ 38
Playback..........................................................................................................................................................39
Search video and playback.................................................................................................................. 39
4 Appendix.............................................................................................................................................................. 41
Specification................................................................................................................................................... 41
Network Interface of Network High Speed Dome.....................................................................................44
Default Network Parameters........................................................................................................................45
Network High Speed Dome DDNS..................................................................................................... 45
Visit Network High Speed Dome under different network environments..............................................46
LAN.......................................................................................................................................................... 46

Rev. A
Internet.................................................................................................................................................... 48
Frequently asked questions......................................................................................................................... 53

iii
CAUTION
Non-technician should not try to operate this high speed dome
before reading this manual carefully. (This manual are subject to
change without prior notice.)
Cut the power supply off before operating the device to avoid
damage caused by mal-operation.
Interior of the camera are precision optical and electrical
instruments. Heavy pressure, shock and other incorrect operations
should be prevented. Otherwise, may cause damage to product.
Please do not use the product under circumstances where the limits
exceed the maximum specified temperature, humidity or power
supply specifications.
Contents in this manual may be different from the edition that you
are using. Should any unsolved problem occur given that the
product is used according to this manual, please contact our
technical support department or your product suppliers.
This manual content will be updated unscheduled, our company
reserves the right to do manual contents update without further
notice.
The default username for this device is “admin”, and the password
is admin. Default IP address is 192.168.1.188, HTTP port is 80.

iv
PACKING LIST
Open the package, and check whether the accessories all
contained.
Part
Quantity
IP speed dome（Include bracket）
1
Screws bag
1
CD
1
Note:
When open the box, please check all of parts carefully,
confirm the parts as same as packing list.
Please read the user manual carefully before the
installation.
Make sure to turn off all the power when install the camera
Please confirm the power transformer, avoid the device
damage with unmatched power source
Contact your local retailer without hesitate if anything is missing
in your package.

1
1. Introduction
Features
Build in 10X optics zoom lens, up to 1080P 1~60FPS
True Day/Night switch
H.264 High Profile encoding, VBR/CBR, dual stream
Video cover, motion detection
Alarm linkage output, TF card video recording, snapshot, FTP
upload, Email inform, link preset, CMS inform
ONVIF Profile S protocol,GB/T28181 protocol
360° horizonal continuous rotation; vertical 0°-90°,255 presets,No
monitoring blind area
Low power consumption – MTTF up to 30,000 hours
1CH alarm input, 1CH alarm output, build in TF card, audio input/
output, 100M Ethernet （Simple camera doesn't contain alarm or
analog video output functions)
IP66 protection level

2
2. Hardware Installation
System requirement
LAN or WAN Internet to connect server, via PC Ethernet
( network card or network cable) TCP/IP protocol （Windows
/NT/2000/XP) connect , suggest Internet Explorer 9.0 version
or later.
Monitor and PC configuration:
CPU: Dicaryon2.8G or latter, RAM: 512M or latter( Above
DirectX8.1)
Monitor: 17",1920×1080 resolution
Operation system: Windows NT, Windows2000, Windows XP,
Windows 7 Or later
Installation environment
Installation environment requirements
Far away from high-temperature or humid environment, notice
ventilation and avoid installing in shaky place.
Recommend operating environment
-20°C～55°C（The camera will enable cold start below -20℃, then it
will turn on the IR leds automatically and operate normally after
heating in 30 minutes)
Hardware installation steps
Please make sure LAN and WAN are working smoothly before
the Network High Speed Dome installation. After checked all the
network system in good condition, keep your hands clean and dry,
following the steps below.
Open the box to check the goods

3
Take out all goods which needed for installation
Network connection
LAN connection
Use one network line to connect Speed Dome with concentrator
or switchboard of the LAN.As Figure below.
Users also can use one network line to connect IP Speed Dome
with computer network card or switchboard.
WAN connection
Use one network line to connect IP Speed Dome with router or
XDSL Modem/Cable Modem. As Figure below.
Fig. Devices connection scenarios
Connect the power supply
After connect the power source, the IP speed camera will
start operation automatically.
router
web browser
switch
web browser
web browser
IP camera
IP camera
IP camera

4
Connection instruction
Multi-function RJ45 line:
Alarm input
Alarm output
RJ45
Analog video output
Power supply input，DV24V
Reset button
GND

5
3. Operating Guide for Network High
Speed Dome
Set the IE Browser
Because the high safety level of the IE browser, If you visit
Network High Speed Dome for first time, Please set the IE browser.
Setting method: Open the IE browser, click Internet Option into
the "Security" page, click the "Custom Level", and then follow steps to
set the IE browser

6
Download and Install ActiveX
Users have to install ActiveX Control when visit Network High
Speed Dome at the first time via IE browser.
Download and install the ActiveX:
Input the IP address of IP Speed Dome (default address
http://192.168.1.188.) in Internet Explorer to enter into login page
(users can refer to the “ NETWORK SETTINGS” under “SETUP” menu
to set the configure the IP address).
At the login interface, click “downloadActiveX”. As Figure 3-1 :
Figure 3- 1
Notice the below download interface, click “Run”. As Figure 3-2:
Figure 3- 2
A “User Account Control” interface will pop out, click “Yes” to
installation. As figure 3-3.

7
Figure 3-3
In download interface,you can also select “save” to save ActiveX
in default storage file,such as D:\TDDOWNLOAD.Then open the file
an install the ActiveX. As figure 3-4 and 3-5.
Figure 3-4
Figure 3-5
Click “Install” in the below interface, as Figure 3-6:

8
Figure 3-6
Click “Finish” in the below interface to complete the installation,
as Figure 3-7:
Figure 3-7
Login
Reopen Internet Explorer after ActiveX installation completes,
input IP address ( http://192.168.1.188,) of the Network High Speed
then turn to login page, input username (default is admin) and
password (default is admin), click login to enter into main
interface(see Figure 3-8):

9
Figure 3- 8
Live view
Live preview interface as figure 3-9:
Figure 3- 9
In the Live view interface, users can do remote operations such
as master/slave stream video preview, voice intercom, listen, video
recording, full-screen preview, video capture, PTZ control, preset, area
scan, pattern scan, PTZ watch, preview video image volume
adjustment, camera module parameters setting, etc.

10
Master/slave stream ：Notice the buttons at the
left right corner, click it to switch the preview mode.
Video capture: Click icon to do screen video capture, it will
create JPG picture and store in the specified folder automatically.
The default file storage path is C:\IPCamera\ , users can set it at
the Setting→→Local→→Local setting .
Full screen: Click icon to get full screen preview, press ESC
or right mouse click to exit full screen preview.
Manual video: Click icon to do manual video operation and
store in the specified file automatically (Video format is mp4, the
default file storage path is C:\IPCamera\, users can set it at the
Setting→→Local→→Local setting .
Image parameters adjustment: Users can adjust the image
parameters at the video preview interface, such as image
brightness, hue, contrast, saturability and sharpness, etc. As
Figure 3-10:
Figure 3-10
Day/Night switch: According to the surveillance need, users can
set color model, black model, auto model. According to the
environment need, users can set Day/night switch sensitivity 0-
255, and Night/day switch sensitivity 0-255. As Figure 3-11:

11
Figure 3-11
White balance: According to the environment color temperature,
users can set the white balance, Auto option for normal light
environment, adjust the white balance value by drop down list
selection, click to save it. As Figure 3-9.
Image rotation: Via the buttons to adjust image rotation, support
horizontal rotation , horizontal+vertical rotation .As Figure
3-9.
WDR: Click to open it , click again to close it. As Figure 3-9.
Low illumination: Click to open it , click again to close it.
As Figure 3-9.
BLC: Click to open it , click again to close it. As Figure 3-9.
3DNR: Click to open it , click again to close it. As Figure 3-9.
Video formats：Select the video format, 50HZ for PAL, 60HZ for
NASC. click to save it. As Figure 3-9.
Exposure compensation: Select the exposure compensation at
the drop down list, click to save it. As Figure 3-9.
Exposure mode: Select auto and handle at the drop down list,
click to save it. As Figure 3-9.
Max shutter: Select the max shutter value at the drop down list,
click to save it. As Figure 3-9.
Min shutter: Select the minimum shutter value at the drop down
list, click to save it. As Figure 3-9.
Max gain: Select the gain value at the drop down list, click
to save it. As Figure 3-9.

12
Click PTZ at the video preview interface to
turn to PTZ configuration interface. As Figure 3-12:
Figure 3-12
PTZ control: User can do horizontal 360°/vertical 180°overall
monitoring via PTZ configuration buttons , PTZ operation
speed 1-63 levels adjustable. As Figure 3-12.
Preset: Adjust the camera to the appointed angle and location
through directional buttons, and then select a preset number in
the preset drop down list, click to set it. There are 1-255
presets can be set, and users can click to delete the preset,
click to call the preset. As Figure 3-12.
Area scan: Via the PTZ buttons to set area scan, click to set
left limit, click to set right limit, and area scan remembered
automatically. When set the area scan, users have to select
Small radian scan(Scan radian less then 180°) / Big radian scan
(Scan radian more then 180°)first, and then set left limit/right
limit. Click to call area scan. As Figure 3-12.
Pattern scan: At the pattern scan drop down list, users can
select the pattern scan number, and edit the pattern scan name.

13
Then click to start recording, click to stop recording,pattern
scan remembered automatically. Click to call pattern scan.
As Figure 3-12.
PTZ Watch: At the PTZ Watch drop down list, users can select
the PTZ watch type( Include preset, CRZ, Pattern, Area, etc),
and set the idle time, then click to save it. As Figure 3-13.
Figure 3-13
CRZ: At the CRZ drop down list, users can select cruise preset,
click to add preset, set the delay time. Select preset ID and
click to delete it. Finally click to save it, and Click to
call pattern scan. As Figure 3-14.
Figure 3-14

14
System specification setting
System
Basic info
System information
Click Setting→ System→ Basic info→ Sysinfo, IP Speed
Dome “Device Info” interface. As figure 3-15:
Figure 3- 15
Device name: Edit the camera name
Device number: Display the device serial number
Hardware version: Display the device hardware version
number
UBOOT version: Display the product system UBOOT version
number
Kernel version: Display the product system kernel version

15
number
APP version: Display the product software version and the
system version date
PTZ version: Display the IP speed dome version model
OCX version: Display the OCX version number
After setting complete, click to save it.
System operate
Click Setting→ System→ Basic info→ Sysoperate, IP Speed
Dome “System operate” interface. As figure 3-16:
Figure 3-16
Rest: Restore factory settings
Reboot: Click to do IP speed dome reboot operation
Parameters type: Select the parameters type which you have
to derive