DR. SAFE CCH016 User manual

Assembly Instructions
CYLINDER STORAGE CABINET
MODEL: CCH016
DR. SAFE
“For A safe Environment!”
A
B
C
D
E
F
.
.
.
29"
Back panel
Base
Door
Side panel
Mid-panel
Shelf A
2 PCS
1 PC
2 PCS
2 PCS
1 PC
3 PCS
G
H
I
J
27"
1/4"× 3/4"
Shelf B
Top panel
Bolt and nut
Washer
3 PCS
1 PC
65 Pairs
65 PCS
*Caution: Two person assembly is recommended.
B
Flat edge of rail facing upward
1. In an open assembly area free of obstructions, place the base (B) upright as
shown. Assemble each side panel (D) and mid-panel (E) by hand-tightening the
bolts, washers and nuts provided (I & J). Panels should be mounted such that
the flat part of shelf support rail will face upward.
E
D
2. Assemble the top panel (H) to the side panels (D) and mid-panel (E). Hand-tighten the
bolts, washers, and nuts provided (I & J). Ensure the unit is square and firmly tighten
the bolts connecting the side and mid panels to the base. Tighten the bolts connecting
the side and mid panels to the top panel. Set unit upright.
A
Flat edge of rail facing upward
3. Connect the back panels (A) to side panels (D) and mid-panel (E) using bolts,
washers, and nuts provided (I & J). Ensure the unit remains square and firmly
tighten the nuts. Note: out of square assembly will prevent the door from closing properly.
H

Assembly Instructions
CYLINDER STORAGE CABINET
MODEL: CCH016
DR. SAFE
“For A safe Environment!”
4. Attach the doors (C) to the assembly using bolts, washers, and nuts provided (I & J).
Note: that the hinges are configured for a left-hand swing, but mounting hardware
can be removed and reversed to a right-hand swing if desired. Hand-tighten nuts,
adjust the door's position such that an even gap is maintained on all sides. Then
firmly tighten nuts.
C
5. Insert the shelves A (F) to the wider space between side and mid panel,
and shelves B (G) to the narrower, and then bolt them to the shelf support
rail using bolts, washers and nuts provided (I & J).
F
G
I
I
6. Finished.
Stock
Number
Finish
Dimension(In.)
W × D × H
Capacity
CCH016
Powder Coated
60 × 30 × 65
16 Horizontal
FLAMMABLE
MATERIALS
FLAMMABLE
MATERIALS
DANGER
DANGER