
lMust test it for stability before applying full weight to hand grips.
If you fail to understand the instructions given in the manual, serious bodily
injury and damage may occur. To understand the cautions and instructions
correctly contact a professional or technical personnel before use.
3. WALKER KEY FEATURES
lA lightweight aluminum u-shape frame that combines strength 7
durability for the user to maneuver.
lComfortable with contoured hand grips
lCan be adjusted to accommodate all users
lEasy folding and push mechanism with safety lock eases transportation
and storage.
lMade up of stable and sturdy anodized aluminum frames.
lPromotes natural walking.
lVery reliable in working with reverse-roll locks.
lEasy to carry & fold.
lDesigned to provide full weight bearing.
lSmooth functioning ensured.
lEach side operates independently to allow easy movement through
narrow spaces and greater stability while standing.
lUnique U-shaped frame design creates greater clearance.
lComfortable use with pleasing looks.
lThe patient is able to bring the walker closer to assist in standing because
of the improved cross-frame.
lHave a rubber tip on the bottom of each of the four legs.
lFrame folds easily using the push button mechanism.
lMaximum stability when standing.
4. WALKER USAGE BASICS
lIt does not have wheels, so you will need to lift it and place it in front of
you to move forward.
lAll its 4 tips need to be on the ground before you put your weight on it.
lLook forward when you are walking, not down at your feet.
lUse a chair with armrests to make sitting and standing easier.
5. FOLDING AND UNFOLDING THE WALKER
lTo unfold the walker, pull the handgrip and rearlegs away from each
other, and the walker should begin to unfold. Continue to unfold the
frame until the latchsnap buttons extend and lock.
lTo fold the walker, face it from the open end, press the latch snap
buttons, tilt the walker so that it rests on its rear legs only, and push the
front legs towards the rear legs.