Dragon Touch S1 Pro User manual

USER MANUAL
v1.0
Dragon Touch Portable Monitor S1 Pro

01 - 15English
16 - 30日本語
31 - 45한국어

CONTENTS
What's in the Box
The S1 Pro at a Glance
Connecting the S1 Pro With Devices
Setting the S1 Pro Portable Monitor
Function Introduction
Supported Devices & Models (With USB-C)
Specification
2-Year Worry-Free Screen Protection
Q&A
Contact Us
1
1
4
6
6
12
14
14
15
15
1
EN

WHAT'S IN THE BOX
THE S1 PRO AT A GLANCE
Dragon Touch Portable
Monitor S1 Pro * 1
Mini-HDMI to HDMI
Cable * 1
Wall Charger * 1 Smart Cover * 1
USB-C Cable * 2
Quick Start Guide * 1
DragonTouch Portable Monitor S1 Pro
3
2
4
1
2
EN

1
2
3
4
8
7
6
5
9
Display
Mini-HDMI Port: Audio and video signal transmission.
Full-Featured USB-C Port: Power supply and audio/video signal transmission.
Full-Featured USB-C Port: Power supply and audio/video signal transmission.
Power Key/Return Key
Roll Key: Press the Roll Key to enter the settings menu.
①Scroll the Roll Key up and down in the menu to select options. As you move
from one icon to another, the icons will be highlighted. Highlight your
desired icon and press the Roll Key to confirm.
②Scroll up in the main interface to activate the brightness menu. Scroll up
and down to increase and decrease the brightness.
③Scroll down in the main interface to activate the volume menu. Scroll up
and down to increase and decrease the volume.
Note: Volume and brightness cannot be adjusted simultaneously. Please change
one setting at a time.
3.5mm Headphone Jack
Speakers
Screw Hole for VESA Mount * 4
7
6
8
5
9
3
EN

CONNECTING THE S1 PRO WITH DEVICES
IMPORTANT:
First, connect your monitor to a power source.
Next, connect it to your desired device.
1. LAPTOP (with USB-C)
Compatible with the latest laptops with a full-featured USB-C port.
Laptop USB-C to USB-C USB-C to USB-C
S1 Pro
Note:
①If the brightness and volume are adjusted to above 70%, connect your S1 Pro to
an external power supply.
②USB-C port functions can vary on laptops. This method may not work on all
laptops with a USB-C port. Please check the laptop's specifications to verify
audio/video signal transmission support.
2. PC/LAPTOP (with HDMI Port)
Compatible with most PCs/laptops with an HDMI port.
Laptop Mini HDMI to
HDMI Cable USB-C to USB-C
S1 Pro
4
EN

3. LAPTOP (with Mini DisplayPort)
Compatible with laptop models with a Mini DisplayPort adapter (not included).
4. iOS/ANDROID DEVICES
The S1 Pro works with compatible Android devices from Samsung, Huawei,
One Plus, Smartisan, OPPO, etc.
Mini HDMI to HDMI Cable
USB-C to USB-C
Connecting your iOS device with the S1 Pro requires a Lightning to HDMI adapter
(not included).
USB-C to USB-CUSB-C to USB-C
HDMI to Mini DisplayPort
USB-C to USB-C
Mini HDMI to HDMI Cable
Lightning to HDMI
Adapter (not included)
Laptop S1 Pro
S1 Pro
S1 Pro
5
EN

5. Other Devices
Compatible with PS3, PS4, Xbox One, Xbox, Switch, and other devices with a
standard HDMI output.
Mini HDMI to HDMI Cable USB-C to USB-C
S1 Pro
SETTING THE S1 PRO PORTABLE MONITOR
1. Press the Roll Key to enter the Settings menu.
2. Scroll the Roll Key up/down to select a settings option, press the Roll Key again
to confirm.
3. Press the Return Key to exit.
FUNCTION INTRODUCTION
1. Brightness
BRIGHTNESS
BRIGHTNESS
BLACK LEVEL
CONTRAST
ECO
DCR
20
50
50
STANDARD
OFF
6
EN

2. Image
BRIGHTNESS: Adjust the brightness parameter of the image. The adjusting range
is from 0 to 100. The default setting is "20".
BLACK LEVEL: Adjust the black level parameter of the image. The adjusting range
is from 0 to 100. The default setting is "50".
CONTRAST: Adjust the contrast parameter of the image. The adjusting range is
from 0 to 100. The default setting is "50".
ECO: This function contains six modes from which to select your preference
(Standard/RTS/FPS/Movie/Text/Game). Each mode has its own pre-set brightness,
contrast and sharpness parameters. Users can set their own brightness, contrast
and sharpness parameters in Standard mode.
DCR (Dynamic Contrast Ratio): Turn DCR mode on or off. When a dark image
needs to be displayed, a monitor that supports dynamic contrast will reduce the
power of the backlight (or use Aperture to reduce the aperture of the projector
lens).
IMAGE
H.POSITION
V.POSITION
CLOCK
PHASE
ASPECT
20
50
50
50
WIDE
ASPECT: Choose the image aspect ratio between "WIDE (16:9)" or "4:3".
Note: "H. POSITION," "V. POSITION," "CLOCK" and "PHASE" cannot be adjusted.
7
EN

3. Color Temperature
4. OSD (On-Screen Display) System Setting
COLOR TEMP.
COLOR TEMP.
RED
GREEN
BLUE
50
50
50
WARM
COLOR TEMPERATURE: Select the color temperature from the pre-set "Warm" or
"Cool", or select "User". Users can set the color temperature under the User setting
mode by adjusting the red, green and blue parameters.
OSD SETTING
LANGUAGE
OSD H. POS.
OSD V . POS.
OSD TIMER
TRANSPARENCY
50
50
10
0
8
EN

LANGUAGE
ENGLISH
FRANÇAIS
DEUTSCH
简体中文
ITALIANO
ESPAÑOL
PORTUGUÊS
TURKCE
POLSKI
NEDERLANDS
日本語
한국어
LANGUAGE: Use this function to select your language.
Options: English/Français/Deutsch/简体中文/Italiano/Español / Português/Turkce/
Polski/Nederlands/日本語/한국어
The default Setting is English.
OSD H. POS.: Set the horizontal (left and right) position where the OSD menu
appears on the screen.
OSD V. POS.: Set the vertical (up and down) position where the OSD menu
appears on the screen.
OSD TIMER: Set the length of time (in seconds) after which the OSD menu will
automatically disappear when there is no operation.
TRANSPARENCY: Set the transparency of the OSD menu.
9
EN

5. Reset
RESET
IMAGE AUTO ADJUST
COLOR AUTO ADJUST
RESET
HDR MODE OFF
6. MISC
MISC.
SIGNAL SOURCE
LOW BLUE LIGHT
VOLUME
FREESYNC
3840 × 2160 60HZ
OD
OFF
OFF
TYPE C2
0
50
RESET: Reset the OSD menu back to factory settings.
HDR MODE: If your video source (movies and games) is HDR, turning on HDR mode
will provide you with a much better visual experience. Otherwise, we suggest
keeping this function turned off.
Options: Off/Auto/2084.
The default Setting is OFF.
10
EN

SIGNAL SOURCE: Select the video signal from HDMI port, USB-C 1 and USB-C 2.
The S1 Pro will auto-match the correct signal port, so we recommend not
djusting it.
LOW BLUE LIGHT: The higher the low blue light parameter, the better for
protecting the eyes. Users can select their most comfortable setting. The adjusting
range is from 0 to 100.
The default setting is "0".
VOLUME: Adjust the audio output volume. The adjusting range is from 0 to 100.
The default setting is "50".
FREESYNC: This mode is only available to devices that support AMD. Make sure to
connect the monitor to your desired device via the lower USB-C port (USB-C 1 port)
or the Mini-HDMI port.
The default Setting is OFF.
2
1
3
(The first port is Mini-HDMI, the second one is USB-C 2, the third one is USB-C 1.)
OD (OverDrive): Turning on this function can enhance response speed.
The default setting is OFF.
11
EN

1. Laptop/Tablet
SUPPORTED DEVICES & MODELS (WITH USB-C)
Brand
Apple
Google
Microsoft
Lenovo
Huawei
Honor
Model
MacBook 2015/2016/2017, MacBook Pro 2016/2017/
2018/2019/2020, MacBook Air 2018/2019/2020,
iPad Pro 2018/2020, iPad Air 2020
Chromebook Pixels, Pixelbook, Pen
Surface Book 2, Surface Book 3, Surface Go 2,
Surface Laptop 3, Surface Pro X, Surface Pro 7
Savior Y7000, Savior Y7000P, Savior Y9000K,
Yoga 6 Pro, Yoga 5 Pro, Miix 720, ThinkPad X1,
Carbon2017
MateBook D, MateBook X, MateBook Pro,
MateBook E, MateBook 13
Magic Book
Dell G3/G5/G7 Series, Inspiron 5000, Inspiron 7000,
XPS13, XPS15, Latitude 5285
HP
Razer
For a current list, please refer to our official website.
EliteBook G1, EliteBook Folio G1, Omen 4 Pro,
Pavilion X2, HP Spetre 13/Envy 13
Blade Stealth
ASUS ZenBook 3/3 Pro, ZenBook X Series, U4100UN,
U5100UQ, ROG Series, U306, U321 Series
12
EN

2. Phone
Brand
Huawei
OPPO
Smartisan
Samsung
Razer
MI
Model
P40, P40 Pro, P30, P30 Pro, P20, P20 Pro, P20 RS,
Mate 10, Mate 10 Pro, Mate 20, Mate 20X,
Mate 20 Pro, Mate RS, Mate 30, Mate 30 Pro,
Honor Note 10, Honor V20
R17 Pro
R1, Pro2s, Pro3
S8, S8+, S9, S9+, S10, S10+, S20, S20+, S20 Ultra,
Fold, Z Flip, Note Series
Razer Phone, Razer Phone 2
Black Shark 2, Black Shark 2 Pro, Black Shark 3,
Black Shark 3 Pro
ROG Gaming Phone
For a current list, please refer to our official website.
LG
ASUS
Nokia
HTC
G5
Nokia 9 PureView
U Ultra
SONY
ZTE
Xperia 1(J9110), Xperia 5, Xperia XZ3
AXON 9 Pro
OnePlus OnePlus 8, OnePlus 8 Pro, OnePlus 7T Pro,
OnePlus 7T
13
EN

Product Name: Dragon Touch Portable Monitor S1 Pro
Screen Size: 15.6"
Panel Type: IPS
Aspect Ratio: 16:9
Resolution: 4K (3840 × 2160)
Visual Angle: 88/88/88/88 (Typ.) (CR≥10)
Contrast Ratio: 1000:1
Display Color: 16.7M
Color Gamut: 100% sRGB
Brightness: 300cd/m²
Refresh Rate: 60Hz
Speakers: Built-in speakers
Input Interface: Mini-HDMI (Audio/Video Signal), Full-featured USB-C * 2 (Video Data,
Power Supply), 3.5mm Headphone Jack
SPECIFICATION
2-year Worry-Free Screen Protection is a unique service for the S1 Pro.
Once registered and activated successfully, you will have one chance to get the
screen replaced if it is broken accidentally (non-artificially) within two years.
Click www.dragontouch.com/warranty to register and activate within seven days
of receiving the product.
2-YEAR WORRY-FREE SCREEN PROTECTION
14
EN

Q: Does my monitor have a built-in battery?
A: No, it doesn't. Please connect an external power supply.
Q: Why is my monitor not working?
A: Check that the cable between the monitor and your device is securely connected.
Make sure the monitor is connected to an external power supply.
Q: Why is my monitor saying "No Signal" when my Type-C laptop/phone is
connected to it?
A: Please ensure your device has at least one full-featured Type-C port. If the
Type-C ports on your device are only for charging; it will not work with this
monitor. For more information, check the list of specific device models that are
currently supported.
Q: Does my monitor support the iPhone?
A: Yes. A Lightning adapter is required to connect to your iPhone.
Q&A
For any inquiries with Dragon Touch products, please feel free to contact us.
We will respond within 24 hours.
Email: [email protected]
Tel: [phone] (US) Mon-Fri (except holidays) 9am-5pm (EST)
Official website: www.dragontouch.com
CONTACT US
15
EN

パッケージの内容
S1Pro画像
S1Proとデバイスの接続
S1Proモバイルモニターの設定
機能紹介
対応デバイス・モデル（Type-C付き）
仕様
2年間の画面保証付き
よくあるご質問
お問い合わせ
17
17
19
21
21
27
29
29
30
30
16
JP




モバイルモニター
S1Pro*1
ミニHDMItoHDMI
ケーブル*1
壁掛け式充電器*1 スマートカバー*1
Type-Cケーブル*2
クイックスタート
ガイド*1
DragonTouch Portable Monitor S1 Pro
3
2
4
1
17
JP

1
2
3
4
8
7
6
5
9

HDMIオーディオ/ビデオ信号伝送
Type-C電源とオーディオ/ビデオ信号伝送
電源とオーディオ/ビデオ信号伝送

ダイヤルボタンを押し、設定メニューに入ります。
①メニューでダイヤルボタンを上下にスクロールし、オプションを選択します。
一つのアイコンから別のアイコンに移動すると、アイコンがハイライト表示され
ます。希望のアイコンに移動してハイライト表示させ、ダイヤルボタンを押して
確認します。
②メイン画面で上にスクロールし、「明るさ」調整画面を起動にします。上下にスク
ロールし、明るさを調整します。
③メイン画面で下にスクロールし、「音量」調整画面を起動にします。上下にスクロ
ールし、音量を調整します。
音量と明るさを同時に調整することはできません。一度に1つの設定の
み変更可能です。
3.5mm


7
6
8
5
9
18
JP