DT Research WebDT 182 Assembly instructions

ENGLISH
Note: The actual package contents may vary depending on the configuraon acquired.
WebDT 182
ENGLISH 4
BASIC OPERATION GUIDE
WebDT 182
signage dtri com
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131 hp://www.dtresearch.com
Copyright © 2011, DT Research, Inc. All Rights Reserved. DT Research and WebDT are registered trademarks of DT Research, Inc.
INTRODUCTION
Thank you for acquiring the
latest addion to DT Research’s line of thin client devices - the WebDT 182, featuring compact,
robust construcon powered by the high-performance and energy efficient Intel® Dual Core
processor. The WebDT 182 supports major embedded operang systems as well as Microso®
Windows® XP Embedded, Windows® XP Pro, or Windows® Embedded Standard 7 and provides
complete soluons for a variety of compung needs. The user is offered a choice of soware
soluons on a plaorm characterized by the following:
High-integraon and energy-efficient processor technology•
Expanded graphics capabilies for mulmedia applicaons•
Robust, fanless construcon for reliable operaon•
Cost-effecve compung in compact and versale packaging•
Package Contents
WebDT 182
AC/DC Power Adapter
VESA Bracket
Basic Operaon Guide
2
2
3
3
4
11
Opons
The WebDT 182 is designed to work with a range of custom and off-the-shelf opons to enhance its
applicability for various deployments.
Built-in wireless LAN, with external antenna•
Bracket and Cable for Internal SSD or HDD Mounng•
BOG030811DT180ENG
SPECIFICATIONS
System
Processor Intel® Celeron Dual Core, 1.9GHz or
Intel® Core™ 2 Duo, 2.26GHz
GPU NVIDIA® ION™
Memory (RAM) Up to 2GB
Storage 8GB Flash, HDD, or 32GB to 64GB SSD
Operang Systems Microso® Windows® XP Embedded, Windows® XP Pro, or
Windows® Embedded Standard 7
Display Resoluon Up to 2560 x 1600
Network Interface 10/ 100/ 1000Mb BaseT LAN;
Wi-Fi 802.11a/b/g or Wi-Fi 802.11a/b/g/n (oponal)
Expansion PCI Express; USB
Input/Output Ports
1 DVI-I port; 1 HDMI port; 1 COM port; 19V DC-in jack; 2
Audio Jacks (Line-in, Headphone-out jacks); 4 USB 2.0 ports;
RJ45 connector for Ethernet;
Wi-Fi dipole antenna (oponal)
Power
AC/DC Adapter Input: 100 – 240V AC; Output: 19V DC
Mechanical
Enclosure Aluminum + steel
Dimensions (H x W x D) 2.16 x 5.82 x 6.5 in/ 55 x 148 x 165.1 mm
Weight 2.9 lbs/ 1316 g
Environmental
Regulatory FCC Class B, CE, C-Tick, RoHS compliant
Temperature Operaon: 0°C - 40°C; Storage: -20°C - 40°C
Humidity 0% - 90% non-condensing
* Specificaons subject to change without noce.
Thin Client/
Embedded Controller

WebDT 182
ENGLISH 23ENGLISH
THE WebDT 182
Powering ON and OFF
The Power Buon is located in the front of the WebDT 182. The Power Buon may be configured to
funcon differently depending on the power opons of the operang system. In general, to turn the
WebDT 182 on, push and release the Power Buon on the front bezel. The adjacent power LED will
be lit (blue) and the corresponding interface will be displayed on the display monitor.
To turn offthe device, again depending on soware operang system, push and release the Power
Buon or use a soware shutdown interface. In the event of system lockup, the Power Buon may
be used to perform a reset on the device. To do that, push and hold the Power Buon for at least 4
seconds. The system will shut down and all unsaved work may be lost. Pushing on the Power Buon
again will restart the device.
Device Ports
The WebDT 182 features an opmal set of I/O ports while preserving the compact size of the
system. The HDMI connector, Network (10/100/1000 BaseT Ethernet), and Power ports are
supplemented by a set of four USB 2.0 and two Audio ports. Through its USB ports, the WebDT 182
supports a wide range of USB-based peripherals. These peripherals are applicable in providing the
means for soware installaon, applicaon storage, data storage, and system soware recovery
and updates.
Memory and Storage
The WebDT 182 may be available in 8GB of flash memory, SSD or HDD storage configuraons.
Depending on base soware configuraon, the user may use the internal memory of the WebDT
182 for user’s installed soware and storage. The user may also supplement storage space with
USB-based peripherals such as flash disks, disk drives, etc. RAM capacity is up to 2GB.
VESA Mounng Bracket Installaon Guide for WebDT182
The WebDT 182 package includes a VESA-compliant mounng bracket (1) which mounts the
WebDT182 (2) onto a VESA-compable monitor or display.
NOTE: The VESA Mounng Bracket is compable with most displays and monitors that support the VESA standard.
Precauons
Always exercise care when operang and handling the WebDT 182.•
Never disassemble any poron of the enclosure. It will void any product warranty on the WebDT•
182.
Do not use any AC/DC adapter other than the one provided with the device or acquired from the•
manufacturer or its partners.
In the unlikely event that smoke, abnormal noise, or strange odor is present, immediately power•
down the WebDT 182 and disconnect all power sources.
Please report the problem to your device provider immediately.•
Rear ViewFront View
ABC D E FGH I
Ethernet port
USB 2.0 (2)
DVI port
DC-in
F
G
H
I
A
B
C
Audio jacks
HDMI port
RS232 COM port
C
D
USB 2.0 (2)
Power buon
Step1:
Locate the exisng mounng holes•
on the monitor.
Line the bracket holes up with the•
holes on the back of the monitor,
as shown to the right.
Place the screws to hold the•
mounng bracket in place and
ghten the screws (do not over-
ghten).
Step2:
Remove the two M3 screws (3)•
originally on the WebDT 180
signage appliance.
Place the WebDT 180 (2) on the•
bracket rail with the interface
ports side facing downwards so
that the two mounng holes on
the appliance are aligned with
the exisng holes on the rail (see
picture).
Step3:
Apply and ghten the screws•
into their original locaons and
make sure that the bracket and
the WebDT 180 are properly
secured.