DTronics DT-210 User manual

DT-210
MANUAL
User’s Manual

DT-210
MANUAL
Index
Document revisions ............................................................................3
1Setup .................................................................................................4
Intended use .......................................................................................4
What is included .................................................................................4
Installation ..........................................................................................4
2Specifications.....................................................................................5

DT-210
MANUAL
Document revisions
Date
Doc. revision
FW version
Change
20-09-2023
R1.0
V1.0
Initial document

DT-210
MANUAL
1Setup
Intended use
The DT-210 MIDI Thru device can be used for managing and routing MIDI data in
more complex musical setups, whether in the studio or during live performances.
It helps ensure that your MIDI signals are distributed efficiently, accurately, and
without data loss.
The input selector front / back gives you the possibility to create a static setup but
also gives you the freedom to quickly connect a temporary device
What is included
Please ensure that your DT-210 includes the following:
•DT-210 MIDI Thru 19” RACK mount
•USB cable (USB-C male to A male)
Installation
Installation of the DT-210 is simple and requires no tools.
1. Make sure that all devices are off.
2. Connect the USB cable to a USB power adaptor.
3. Connect the receiving MIDI devices to the DT-210 outputs
4. Connect the sending MIDI device to the DT-210 input on the front or on the
back.
5. Select the proper input with the input selector
6. Turn on the MIDI devices.
7. When the DT-210 receives MIDI data the activity LED is turned onThe
DT800 can edit the preset patches of the synthesizer.

DT-210
MANUAL
2Specifications
Characteristics
•Front 1 x MIDI input / 2x MIDI output
•Rear 1 x MIDI input / 9 x MIDI output
•Front/rear input selectable by means of switch
•MIDI signal detection LED shows all MIDI signals being received
•All MIDI data is sent from the input to all outputs with ultra-low latency
•Automatic MIDI signal control ensures correct MIDI signals with distorted
MIDI signals
•Compatible with 3.3 V and 5V MIDI standard
Dimensions DT-210
•width: 19” RACK mount model (483,00mm)
•height: 1U (43,60mm)
•depth: 36,20mm
Weight DT-210, 670 gram
Power consumption USB: 0.7 Watt max, < 0.1 Watt at standby

DT-210
MANUAL