Ducasa TP520 User manual

THERMOSTAT TP520
CONTENT
IMPORTANT INFORMATION FOR SAFE USAGE
CONTROLS AND SETTINGS
DISPLAY STRUCTURE
SET DAY AND TIME
EVENT TIME PROGRAMMING
TEMPERATURE RANGE PROGRAMMING
SCREENSAVER
SELECT OPERATION MODE
ALARM INDICATION
TECHNICAL DATA
LINE DIAGRAM
MENU STRUCTURE
WARRANTY
1
2
2
3
4
6
6
7
7
8
8
8
8
IMPORTANT INFORMATION FOR SAFE USAGE
Manufacturer's guarantee does not cover malfunctions caused by mechanical damage, improper installation, or exploitation for purposes, or
under conditions, not provided by the User- and Installation Manual. Please keep in mind that the Installation Manual and the Connection
Diagram are no replacement for the professional skill of the device installer. We recommend that you apply for professional service for the
thermostat and heating system installation. Only qualified electricians should perform the connections and power networking of the device.
Switch off power before connecting wiring to the thermostat or disconnecting the device for testing.
Introduction
Thank you for choosing the TP 520 electronic regulation device, the new intelligent heating control system. With this product you will see how
easy it is to maintain your comfort at a lower cost; it will take care of keeping your home warm and cozy all the time. Designed with innovation
and inspiration, the new thermostat is highly reliable, and easy to set and use.
Separate settings can be programmed for different times of the day, whether or in or out.
Application
The thermostat TP520 is designed to control underfloor heating systems (heating mats, sections, film heaters). The thermostat maintains
comfortable heating temperature and saves energy.

2
TEMPTIMEDATEPROGSET
MO TU WE TH FR SA SU
28,0C
1 2 3 4
DISPLAY STRUCTURE
Other
Operation modes
Temperature settings
freeze protection mode
constant temperature maintenance
programm mode
heating on
Comfort modus, temp. adjustable
Economy modus, temp. adjustable
Programm modes
4
2
3
1„WAKE UP“
„LEAVING HOME“
„COMING HOME“
„GOING TO SLEEP“
PROG / ESC
MODE /OK
decrease the values
enter the programm mode and EXIT
switch the indication & set limits and modes
increase the values
1
2
3
4
-
+
Hands are used, if it is necessary to push
several butons together or push buttons for
longer time
To start the described action, the marked
button must be pushed
PROG/ESC MODE/OK
1
23
4
CONTROLS AND SETTINGS
RESERVATION
Technical data are subject to change without notice. Changes, errors and printer's errors do not justify claims for damages. For safety
components and systems the relevant standards and regulations are to be observed, as well as the corresponding operating and installation
instructions.
During the „COMFORT“ period the desired comfort temperature will be maintained.
During the „ECONOMY“ period the temperature will be reduced to the desired
minimum temperature to safe energy.
INSTALLATION
Thermostat is locked
MO Monday
TU Tuesday
WE Wednesday
TH Thursday
FR Friday
SA Saturday
SU Sunday
Confort temperature
Minimum temperature
Wake up
Leaving home
Comming home
Going to sleep

3
SET DAY AND TIME
8sec.
PROG/ESC MODE/OK +
-
SET DAY AND TIME
SET TIME
Set the required hour with the “+” or “–” button.
Confirm the selection with MODE/OK button.
Now the minutes procedure start.
5
Set the required minutes with the “+” or “–” button.
Confirm the selection with the MODE/OK button.
The „Day and time setting“ procedure is completed.
6
SET
TIME
WE
12 40
PROG/ESC MODE/OK
SET
TIME
WE
12 00
PROG/ESC MODE/OK
TU
TEMP
19,0C
Unlock the thermostat Press and hold the PROG/ESC button for 8 seconds
TEMP
WE
19,0C
PROG/ESC MODE/OK PROG/ESC MODE/OK
WE
SET
DATE & TIME
1 2
8s
ENTER THE PROGRAMMING
SET DAY
Press the MODE/OK button.The „Day
of the week symbol“ will start to blink
3
Set the actual day of the week with the “+” or “–” button. Confirm
the selection with MODE/OK button.
4
SET
DATE
MO
PROG/ESC MODE/OK PROG/ESC MODE/OK
SET
DATE
TU
SET
DATE
TU
PROG/ESC MODE/OK

4
Unlock the thermostat Press and hold the PROG/ESC button for 4 seconds
TEMP
WE
19,0C
PROG/ESC MODE/OK PROG/ESC MODE/OK
WE
SET
DATE & TIME
1 2
4s
ENTER THE PROGRAMMING
EVENT TIME PROGRAMMING
WAKE UP EVENT
Press the MODE/OK button.
The „Time symbol“ starts blinking.
3
Set your WAKE UP time with “+” and “–” buttons.
Confirm the selection with the MODE/OK button.
4
5
1
TEMPPROGSET
MO
1
PROG/ESC MODE/OK
0740,
PROGSET
1
0740,
TIME
MO
PROG/ESC MODE/OK
Set the modus COMFORT
with the “+” or “–” button.
TEMPPROGSET
MO
1
0740,
PROG/ESC MODE/OK
PROG/ESC MODE/OK
PROGSET
1
0700,
TIME
MO
4 sec.
PROG/ESC MODE/OK +
-
EVENT TIME PROGRAMMING
LEAVING HOME EVENT
Press the MODE/OK button.
The time will start to blink
67
8
Set your GO OUT time with “+” and “–” buttons.
Confirm the selection with the MODE/OK button.
Set the modus ECONOMY
with “+” or “–” button.
2
PROG/ESC MODE/OK
PROGSET
0800,
TIME
2
MO
PROG/ESC MODE/OK
PROGSET
0830,
TIME
2
MO
PROG/ESC MODE/OK
TEMPPROGSET
MO
0830,
2
PROG/ESC MODE/OK
TEMPPROGSET
MO
0830,
2

5
After setting the desired modus in the Step 14 press the MODE/OK button. The thermostat will proceed to set up the time for Wake-up event for
the next day of the week (TUESDAY) - please repeat the setting from step3 .- 14 for all other days
COMING HOME EVENT
3
Press the MODE/OK button.
The time will start to blink
910 Set your COMING HOME time with “+” and “–” buttons.
Confirm the selection with the button.MODE/OK
Set the COMFORT modus
with “+” or “–” button.
11
PROG/ESC MODE/OK
PROGSET
1900,
TIME
MO
3
PROG/ESC MODE/OK
PROGSET
3
1930,
TIME
MO
PROG/ESC MODE/OK
3
TEMPPROGSET
MO
1930,
PROG/ESC MODE/OK
3
TEMPPROGSET
MO
1930,
GOING TO SLEEP EVENT
4
Press the MODE/OK button.
The time will start to blink 13
12 Set your GOING TO SLEEP time with “+” and “–” buttons.
Confirm the selection with the MODE/OK button.
Set the modus
with “+” or “–” button.
ECONOMY
14
PROGSET
2200,
TIME
4
MO
PROG/ESC MODE/OK
PROGSET
2230,
TIME
MO
4
PROG/ESC MODE/OK
TEMPPROGSET
MO
2230,
4
PROG/ESC MODE/OK
TEMPPROGSET
MO
2230,
4
PROG/ESC MODE/OK
EVENT TIME PROGRAMMING
4 sec.
PROG/ESC MODE/OK +
-
EVENT TIME PROGRAMMING
DEFAULT SETTINGS
Time
Temperature level
Time
Temeparture level
7:00
7:00
8:00
8:00
19:00
19:00
22:00
22:00
Monday to Friday
Saturday and Sunday
Event
Day 13
24
OPERATION SCHEME DESCRIPTION
CONSTANT TEMPERATURE MODE
The thermostat constantly maintains the desired floor temperature. The temperature is adjustable from +12°C up to +35°C.
PROGRAM MODE
Depending on time and day of the week the thermostat automatically switches the „Comfort“ or „Economy“ floor temperature modus
depending your selections. The temperature is adjustable from +12°C up to +35°C.
ANTI - FREEZING
This mode is suitable to keep minimum positive temperature in the premise while nobody inside for a long time.
adjustable from +5°C up to +12°C.
The temperature is

6
WE
SET
TEMP
PROG/ESC MODE/OK
19,0C
ENTER THE PROGRAMMING
Unlock the thermostat Press and hold the MODE/OK button for 8 seconds.
The symbol for the „ECONOMY MODUS“ apears and the
temperature starts with blinking.
TEMP
WE
19,0C
PROG/ESC MODE/OK
1 2
TEMPERATURE SETTINGS
During the „ECONOMY MODUS“ the temperature will be reduced to your desired minimum temperature. Set the desired
„ECONOMY MODUS TEMPERATURE“ with the “+” or “–” button. MODE/OK.Now the „COMFORT
MODUS TEMPERATURE“ could be adjusted on the same way. Confirm the selection with MODE/OK. Setup is completed and
the Display shows the actual temperature.
Confirm the selection with
SET TEMP
MO
PROG/ESC MODE/OK
TEMP TEMP SET SET
MO MO
PROG/ESC MODE/OK
20,0C 22,0C 25,0C
3
PROG/ESC MODE/OK
TEMPERATURE RANGE PROGRAMMING
8 sec.
PROG/ESC MODE/OK +
-
TEMPERATURE RANGE PROGRAMMING
2 sec.
PROG/ESC MODE/OK +
-
SCREENSAVER
SELECT SCREENSAVER
Unlock the
thermostat
TEMP
WE
19,0C
TEMP
WE
19,0C
TEMP
WE
7 40
PROG/ESC MODE/OK PROG/ESC PROG/ESC
MODE/OK MODE/OK
1 2 3
The default screensaver is “Floor temperature”.
Press and hold MODE/OK key for 2 seconds.
The screensaver will change to “Current time”
If you p
key for 2 seconds again, the
screensaver will change back to
“Floor temperature”
ress and hold MODE/OK

7
ENTER THE PROGRAMMING
Unlock the thermostat Press and hold MODE/OK button for 4 seconds.
The operation scheme indicator will start to blink
TEMP
WE
19,0C
PROG/ESC MODE/OK
1 2
PROG/ESC MODE/OK
4s
WE
SET
19,0C
OPERATION MODE SELECTION
PROG/ESC MODE/OK
Set the operation scheme with the
“+” or “–” button.
Confirm the selection with MODE/OK.
The scheme is set.
3 4
WE
SET
19,0C
PROG/ESC MODE/OK
WE
SET
19,0C
SELECT OPERATION MODE
4 sec.
PROG/ESC MODE/OK +
-
SELECT OPERATION MODE
ALARM INDICATION
ALARM INDICATION
Display apears in case of -
SENSOR FAILURE
Display apears in case if the heating system fails to heat the surface to more than
+5°C or in case of surface overheating by more than +45°C occurs.
1 2
TEMP
WE
LO C
PROG/ESC MODE/OK
TEMP
WE
HI C
PROG/ESC MODE/OK
WE
PROG/ESC MODE/OK
-- --

8
Power supply
Maximum load current
Thermostat power consumption
Weight
Dimensions
IP rate
Protection class
Floor temperature sensor (TST02)
Sensor cold lead length
Ambient air temperature range
Maximum humidity
Temperature setting range
Color
230VAC, 60Hz
16A
450 mW
150 g
86x86x35 mm
IP21/IP31
II
NTC 6,8 kOhm
2 m
from +5°Ñto +40°Ñ
80%
from +5°Ñ to +35°Ñ
White
TECHNICAL DATA
MENU STRUCTURE
LINE DIAGRAM
PROG/ESC MODE/OK +
-
PROG/ESC MODE/OK +
-
1x
4 sec
8 sec
Exit without saving
Event time programming
Set date
1x
2 sec
4 sec
8 sec
Confirm settings
Screensaver selection
Operation mode selection
Set temperature
Sensor
t
230 VAC
13
L
24
N
5
N
6
L
Load (Heating)
The thermostat TP520 passed the test.
Name:
Street:
ZIP code, city:
Country:
Phone: E-Mail:
Date of purchase: Installer:
Installation date: Signature
installer:
Switch off power from all wiring before installing, testing or replacing the thermostat. Only qualified electricians are allowed to work on electrical
connections and the electric supply of the device. Otherwise the warranty invalidates. Only use plastic wall mounting boxes for the thermostat
installation.
The producer guarantees that the thermostat TP520 is free from defects caused by manufacturing techniques or by using of poor materials.
Warranty period – 2 years from date of purchase.
In case of a failure during the warranty period because of faulty manufacturing despite correct executed installation (according to manual) the
customer has the right to get the product repaired or replaced. The warranty does not cover any damages due to inadequate handling, damages
through third party fault, wrong installation (not following the manual) or its consequential damages. Please keep your receipt.
For any warranty claims you have to show your sales receipt.
In case of failure during the warranty period please contact the manufacturer service center or the regional authorized representative.
PRECAUTIONS
WARRANTY
CLAIMS
ACCEPTANCE TEST CERTIFICATE
Ducasa
Venezuela, 33
08019 Barcelona
Tel.: + 4 933 2478630
Fax: 4 93+3 2455781
[email protected]
www.ducasa.com