Duke Energy EnergyWise Business User manual

LETTER
8.5” X 11”
SBDR1509 –EnergyWise Business Wi-Fi Switch User Manual (DirectLink)
Piece: M nu l
Quantity: XXXXX
Size: 8.5 x 11”
Colors: 4/4
Finishing: Fold, Trim
Mail: N/A
CREATIVE PROOFREADER COP COP WRITER CREATIVE ACCOUNT
DIRECTOR SUPERVISOR SERVICES MANAGER
MANAGER
SBDR1509
EnergyWise Business Wi-Fi Switch User M nu l (DirectLink)
Job Opened: June 19, 2015
Requested In-Home Date: __________
Latest Revision: September 15, 2015 October 5, 2015 November 2, 2015 December 17, 2015
Approved: December 17, 2015
Program Speci ic Checklist Name: Date:
®Phone Number _________ _________
®URL _________ _________
®Program Details _________ _________
Look inside for a complete guide to the setup
and operation of your new Wi-Fi®switch.
EnergyWise®Business
Wi-Fi Switch User Manual
Installed by: ____________________________________________
Date: __________________________________________________
Number of Wi-Fi switches: ______________________________
Notes: ________________________________________________
©2015 Duke Energy Corporation SBDR1509 11/15

LETTER
8.5” X 11”
SBDR1509 –EnergyWise Business Wi-Fi Switch User Manual (DirectLink)
Piece: M nu l
Quantity: XXXXX
Size: 8.5 x 11”
Colors: 4/4
Finishing: Fold, Trim
Mail: N/A
CREATIVE PROOFREADER COP COP WRITER CREATIVE ACCOUNT
DIRECTOR SUPERVISOR SERVICES MANAGER
MANAGER
Program Speci ic Checklist Name: Date:
®Phone Number _________ _________
®URL _________ _________
®Program Details _________ _________
SBDR1509
EnergyWise Business Wi-Fi Switch User M nu l (DirectLink)
Job Opened: June 19, 2015
Requested In-Home Date: __________
Latest Revision: September 15, 2015 October 5, 2015 November 2, 2015 December 17, 2015
Approved: December 17, 2015
2
EnergyWise®Business Wi-Fi Switch User Manual
EnergyWise®Business Wi-Fi Switch Applications Gui e
EnergyWise Business is available to customers of Duke Energy Carolinas and Duke Energy Progress. EnergyWise Business
Wi-Fi switch can be installed to control the following loads.
It requires connection to line power and must be installed by a
trained, experienced technician. Customers should not under any
circumstances open the door and touch any components inside as
line voltage (120 – 240 VAC) is present. They should be aware
they could damage this product or cause a hazardous condition i
they ail to ollow these instructions.
Need Help? For assistance with this product please visit call
866.821.8423.
HVAC
For HVACs only: EnergyWise Business Wi-Fi switch is typically installed
outside near the compressor. It is wired to the same power source as the
compressor. Relays inside EnergyWise Business Wi-Fi switch will intelligently
reduce the compressor run time during a conservation period to reduce the
demand on the electrical grid during conservation periods. Relay(s) inside
the device will interrupt the control signal from the thermostat to the
compressor and will only disable the compressor periodically during a
conservation period. The indoor fan will continue to run during this time.
The indoor temperature is expected to rise a few degrees during the
conservation period, depending on the amount of insulation in the premises.
Description
HVAC Yes
Water Heater Yes
Pool Pump Yes
Refrigeration Yes
Link Test
Relay 1 Relay 2
LED Indicators
LEDs an What They In icate
EnergyWise®Business Wi-Fi switch contains up to four LEDs (light emitting diodes) underneath a clear window in front of
the unit. These LEDs show the operation of the EnergyWise Business Wi-Fi switch as shown below:
Shows status of
communication link
Light on when a
conservation period is
active and relay is open
Used by installer
Light on when a
conservation period is
active and relay is open

LETTER
8.5” X 11”
SBDR1509 –EnergyWise Business Wi-Fi Switch User Manual (DirectLink)
Piece: M nu l
Quantity: XXXXX
Size: 8.5 x 11”
Colors: 4/4
Finishing: Fold, Trim
Mail: N/A
CREATIVE PROOFREADER COP COP WRITER CREATIVE ACCOUNT
DIRECTOR SUPERVISOR SERVICES MANAGER
MANAGER
Program Speci ic Checklist Name: Date:
®Phone Number _________ _________
®URL _________ _________
®Program Details _________ _________
SBDR1509
EnergyWise Business Wi-Fi Switch User M nu l (DirectLink)
Job Opened: June 19, 2015
Requested In-Home Date: __________
Latest Revision: September 15, 2015 October 5, 2015 November 2, 2015 December 17, 2015
Approved: December 17, 2015
3
EnergyWise®Business Wi-Fi Switch User Manual
Link LED
The Link LED is used to indicate the status of the communication link. When it stays on solid, it indicates good end-to-end
communication with the controlling software system. If any link along the communication chain is lost, the LED will blink in
different patterns as shown below.
Link LED Operation Table
Test LED
The Test LED is used by the installer during installation. When the device is first powered up, the Test LED will flash either
once or twice to indicate cold or warm starts, respectively. The Test LED can also be manually toggled by the installer to test
end-to-end communication with the software using the installer's test tool. In normal operation, this LED should be off.
Relay LED
The relay LED(s) is used to indicate whether the appliance is prevented from running during a conservation period. It is turned
on whenever the appliance (HVAC) is being controlled and is prevented from running. When used with HVAC,*the compressor
is cycled on and off periodically. This allows some amount of cooling/dehumidification as well as air circulation during the
control period to minimize customer discomfort. This LED will turn on during the times when the HVAC is turned off.
Link LED Status
Off Client mode - no network connection
0.5 second blink Ad-hoc mode – IntelliPEA is creating its own
Wi-Fi network to allow entry of credentials
1 second on, 3 seconds off blink Client mode - Wi-Fi network connected, waiting
for Internet connection
3 seconds on, 1 second off blink Client mode – Wi-Fi/Internet network connected,
but not connected to controlling software
Solid On Client mode - Cellular/Internet/software
connection O
*HVACs may have multiple compressor stages. In these installations, each relay is used to control each stage of the compressor and both relays will open at
the same time to prevent both stages of the compressor from running during a conservation period.

LETTER
8.5” X 11”
SBDR1509 –EnergyWise Business Wi-Fi Switch User Manual (DirectLink)
Piece: M nu l
Quantity: XXXXX
Size: 8.5 x 11”
Colors: 4/4
Finishing: Fold, Trim
Mail: N/A
CREATIVE PROOFREADER COP COP WRITER CREATIVE ACCOUNT
DIRECTOR SUPERVISOR SERVICES MANAGER
MANAGER
Program Speci ic Checklist Name: Date:
®Phone Number _________ _________
®URL _________ _________
®Program Details _________ _________
SBDR1509
EnergyWise Business Wi-Fi Switch User M nu l (DirectLink)
Job Opened: June 19, 2015
Requested In-Home Date: __________
Latest Revision: September 15, 2015 October 5, 2015 November 2, 2015 December 17, 2015
Approved: December 17, 2015
4
EnergyWise®Business Wi-Fi Switch User Manual
Col Loa Pickup
EnergyWise®Business Wi-Fi switch is designed to prevent the connected load from coming back on immediately after a
power outage. This ensures that the electrical grid has time to recover from the transient condition that caused the outage.
When the Cold Load Pickup is activated, the Relay LEDs will turn on and the relays are open to prevent the load from running.
This is normal. After the Cold Load Pickup timer expires, the connected appliance is allowed to resume its normal operation.
The default Cold Load Pickup time delay is:
• HVAC – 90 seconds
Har ware Error Reporting
If the EnergyWise Business Wi-Fi switch hardware senses an error that prevents normal operation of the switch, then all
LEDs will flash as an indicator of this condition. If this happens repeatedly, then the switch should be replaced.
EnergyWise Business Wi-Fi Switch Wiring
• 2 Single Stage Condenser Units and a Single EnergyWise Business Wi-Fi switch

LETTER
8.5” X 11”
SBDR1509 –EnergyWise Business Wi-Fi Switch User Manual (DirectLink)
Piece: M nu l
Quantity: XXXXX
Size: 8.5 x 11”
Colors: 4/4
Finishing: Fold, Trim
Mail: N/A
CREATIVE PROOFREADER COP COP WRITER CREATIVE ACCOUNT
DIRECTOR SUPERVISOR SERVICES MANAGER
MANAGER
Program Speci ic Checklist Name: Date:
®Phone Number _________ _________
®URL _________ _________
®Program Details _________ _________
SBDR1509
EnergyWise Business Wi-Fi Switch User M nu l (DirectLink)
Job Opened: June 19, 2015
Requested In-Home Date: __________
Latest Revision: September 15, 2015 October 5, 2015 November 2, 2015 December 17, 2015
Approved: December 17, 2015
EnergyWise®Business Wi-Fi Switch User Manual 5
• 1 Two Stage Condenser Unit and a Single EnergyWise®Business Wi-Fi switch
EnergyWise Business Wi-Fi Switch Setup
EnergyWise Business Wi-Fi switch is paired with the premises Wi-Fi network during the initial install. EnergyWise Business
Wi-Fi switch stores all security credentials in permanent memory and will use these credentials to reconnect to the Wi-Fi
network after power outages. However, if any of the Wi-Fi network credentials are changed (i.e., router, SSID or security
password changes), EnergyWise Business Wi-Fi switch will fail to connect to the Wi-Fi network using the old credentials. If
this occurs, EnergyWise Business Wi-Fi switch will continually attempt to rejoin, but will also periodically revert back to the
“Ad-Hoc” mode where it broadcasts its own Wi-Fi network to allow external devices (PC/MAC/tablet/smartphone) to enter the
new credentials. The duration that EnergyWise Business Wi-Fi switch is in “Ad-Hoc” mode increases the longer it cannot
connect to the old Wi-Fi network. Initially, EnergyWise Business Wi-Fi switch will stay in “Ad-Hoc” mode for a few minutes,
but will extend to a maximum of a full hour. The Link LED (see LED section) indicates the current status of the
communication link and also indicates when EnergyWise Business Wi-Fi switch is in “Ad-Hoc” mode.
Please follow the steps below to reset the credentials stored in EnergyWise Business Wi-Fi switch:
1. Note the serial number of EnergyWise Business Wi-Fi switch. There should be a serial label on the side of the product.
Note the last four digits of the serial number.
2. If the device is accessible and convenient, check to see if the device is in “Ad-Hoc” mode. This is indicated by a blinking
Link LED (see Link LED table above).
3. Use a Wi-Fi-enabled smartphone, tablet or computer to connect to the thermostat. Open the Wi-Fi settings menu on your
device and select the EnergyWise Business Wi-Fi switch network displayed. The network will be Wifi-switchXXXX. The
XXXX will be the last four digits of the EnergyWise Business Wi-Fi switch serial number. You may receive a notification
that you are connected to a non-secure network. Select OK or CONTINUE.
4. Open the Web browser on your device. If your browser is set to automatically open a Web page, the EnergyWise Business
Wi-Fi switch configuration page should automatically appear.

LETTER
8.5” X 11”
SBDR1509 –EnergyWise Business Wi-Fi Switch User Manual (DirectLink)
Piece: M nu l
Quantity: XXXXX
Size: 8.5 x 11”
Colors: 4/4
Finishing: Fold, Trim
Mail: N/A
CREATIVE PROOFREADER COP COP WRITER CREATIVE ACCOUNT
DIRECTOR SUPERVISOR SERVICES MANAGER
MANAGER
Program Speci ic Checklist Name: Date:
®Phone Number _________ _________
®URL _________ _________
®Program Details _________ _________
SBDR1509
EnergyWise Business Wi-Fi Switch User M nu l (DirectLink)
Job Opened: June 19, 2015
Requested In-Home Date: __________
Latest Revision: September 15, 2015 October 5, 2015 November 2, 2015 December 17, 2015
Approved: December 17, 2015
6
EnergyWise®Business Wi-Fi Switch User Manual
5. If the settings page does not appear after a few seconds,
type “directlink/settings” in the address bar, and then
press ENTER.
8. Manually enter the Wi-Fi
Network Name (SSID),
select the security type
from the drop-down menu,
and enter the security key.
9. Enter the network
password for your network
in the Security ey field.
6. Use the pull-down on the
settings page to select your
user network name.
7. If your Wi-Fi router is set to
hide the network name, or
your network is not listed
in the pull-down, click on
the link “Click Here if your
WiFi network is not listed”
to display the manual
settings page.
10. Once all fields are filled in
correctly, click on the Save
button.
11. The settings page will now
show an overview of the
settings you entered. If all
settings are correct, click
on Apply. If you need to
correct any settings, click
on Cancel.
12. After clicking Apply, a
Configuration Complete
message will be
displayed. Close your
browser to complete the
network configuration.
13. Steady state yellow LED will signify the successful completion of the Wi-Fi setup and network connection.
14. Restore your Wi-Fi-enabled smartphone, tablet or computer to connect to the normal network.

LETTER
8.5” X 11”
SBDR1509 –EnergyWise Business Wi-Fi Switch User Manual (DirectLink)
Piece: M nu l
Quantity: XXXXX
Size: 8.5 x 11”
Colors: 4/4
Finishing: Fold, Trim
Mail: N/A
CREATIVE PROOFREADER COP COP WRITER CREATIVE ACCOUNT
DIRECTOR SUPERVISOR SERVICES MANAGER
MANAGER
Program Speci ic Checklist Name: Date:
®Phone Number _________ _________
®URL _________ _________
®Program Details _________ _________
SBDR1509
EnergyWise Business Wi-Fi Switch User M nu l (DirectLink)
Job Opened: June 19, 2015
Requested In-Home Date: __________
Latest Revision: September 15, 2015 October 5, 2015 November 2, 2015 December 17, 2015
Approved: December 17, 2015
7
EnergyWise®Business Wi-Fi Switch User Manual
Power Input 120VAC – 240VAC auto-ranging
Power Consumption Less than 12 VA
Operating Condition -35° to +85° C, 0% - 95% humidity
(non-condensing)
Regulatory FCC part 15; UL 916
Relay Rating/Cycles 2 Function (2F): 24VAC, 2 Amp
1 Function (1F): 240VAC, 30 Amp Resistive
Electrical Endurance: 250,000 cycles at rated
worst-case loads
Mechanical Endurance: 10 million cycles at
rated loads
Packaging Injection molded, high-impact poly-carbonate,
weather-resistant for outdoor installation
Specifications