Duosida SES Series User manual

Zhangj agang Uchen New Energy Technology Co.Ltd
Att:[e-mail]
Add : No.999 yongjin road,miaoqiao,tangqiao town,
zhangjiagang city,jiangsu province.china
2020-7-22 The Second Edition

User Manual
2
User
Manual
SES Series Charager
Zhangjiagang Uchen New Energy Technology Co.,Ltd

User Manual
3
Dear users:
Thank you for using our Company’ products.
Please read this guide seriously and storage carefully.
In order for you to better use and maintain this product, (here in
after referred as EV charging station).
The EV charger includes the high voltage circuit, low voltage
circuit. Please do not disassemble or refit by yourself.
The fault caused by this won't belong to the warranty.
Our company won't responsible for the injure caused by this.
This manual is used to use this product correctly, It's not the
configuration instruction of this product.
About the configuration status, please read the relevant contracts
of EV charger (if you have), or advisory the agency.

User Manual
4
CATALOGUE
CATALOGUE
CATALOGUE
Introduction
1 Product appearance and type --------------------------------page 7, 8
2 Product description of appearance
2.1 SES Charger -----------------------------------------page 9
2.2 E-stop and incoming line ------------------------------page 9
4.LED screen & Protect function -------------------------------page10
5.Technical parameters --------------------------------------Page11-17
6.How to charge --------------------------------------------page18
7. How to use wifi ------------------------------------------page19-32
8 How to install---------------------------------------------page32-47
9.FAQ-----------------------------------------------------Page48-51
10.Contact-------------------------------------------------page51

User Manual
5
Application:
EV charger is used to offer the AC power for the vehicle with an battery charger.
EV charger can be assembled in all kind of parking lot public, company and
community.
It is also can be assembled in kind of large, medium and small charge station.
It is suitable all kinds of parking lot unmanned, users can charge, pay, etc.
independently.
Supporting smart charging.
Supporting APP smart control (remote start charge, reserving charging, set
charging current, display and view charging status, etc. APP’s name is DUOSIDA
Charge, you can find it in Google play or apple store.)
Remark: smart charging require EV charger containing WiFi modules. WiFi modules are
optional.

User Manual
6
WARNING
It's may cause danger and harm, or damage the device if you don't in
accordance with safety guide.
Electrical and fire risk:
Don't use damaged and smudgy charge connector.
The electrical system for the connection of the EV charger must be inspected by
professional, meet the current requirements of the station, also installed a
residual current short circuit (RCB)
Don't follow the safety instructions can result in danger and injury, as well as
damage to the equipment.
Check the charging station and connector and see if there are any visible
damage before each use.
EV chargers can only be used to charge electric vehicles (EVs) or hybrid vehicles
(PHEVs).
Do not install the charging station in a closed container to avoid overheating.

User Manual
7
Product appearance and type
SES Charger with cable
SES Charger with socket
Brief instruction

User Manual
8
IEC Charging Mode: Mode3 Case C
IEC Charging Mode: Mode3 Case B
Remark: 1 For case B, You need to buy a charging cable separately.
2 (a) Socket-outlet, (b) Plug, (c) Cable, (d) Vehicle connector, (e) Vehicle
coupler, (f) Vehicle inlet, (g) Charging station, (h) EV socket-outlet, (i) EV
plug.

User Manual
9
Inlet wire
Outlet wire (2080)
Socket (2030)
Annular status light
LED screen
Arc status light
Description of appearance

User Manual
10
Description of LED screen
Temperature
Voltage
Current
Duration
KW/h
Protection Class of Case
Indoor and outdoor use
Protection Function
Over temperature protect
Over voltage protect
Leakage current protect
E-stop switch
Over current protect
Low voltage protect
E-stop switch
Lightning protection

User Manual
11
The dimensions
Technical parameters

User Manual
12
1.Style - wall mounted
Technical specifications:
Installation method: wall mounted
Maximum power: 22kW
Communication interface: (optional)
GPRS ■WIFI ■RFID
Outdoor protection:
Without power supply - the waterproof protection
grade can reach up to IP55
With power supply-The waterproof protection grade
state can reach up to IP54,under coupling state
Safety regulation: Meet IEC 61851 and IEC 62196
Operating temperature:
ambient temperature - 30 ℃ to 50 ℃
Output type:
EN 61851-1 MODE 3 OR MODE 2
22KW：400VAC@32A
Basic functions:
Starting mode: charge when plug, smart charge for
APP
Reminder function: charging indication and fault
indication
Self-test function: fault self-position (can be checked
in the background after being networked)
Human-computer interaction:
Safety protection:
Double leakage detection and protection
Emergency stop button protection
Over current, over voltage, under voltage and over
temperature protection
Data record if Power off (can be checked in the
background system if being networked)
Surge protection meets the latest IEC 61851 standard
EMC meets the latest IEC 61851 standard

User Manual
13
2.Style - Stake
Technical specifications:
Installation method: stake-type mounted
Maximum power: 22kW
Communication interface: (optional)
GPRS ■WIFI ■RFID
Outdoor protection:
Without power supply - the waterproof protection
grade can reach up to IP55
With power supply-The waterproof protection grade
state can reach up to IP54,under coupling state
Safety regulation: Meet IEC 61851 and IEC 62196
Operating temperature:
ambient temperature - 30 ℃ to 50 ℃
Output type:
EN 61851-1 MODE 3 OR MODE 2
22KW：400VAC@32A
Basic functions:
Starting mode: charge when plug, smart charge for
APP
Reminder function: charging indication and fault
indication
Self-test function: fault self-position (can be checked
in the background after being networked)
Human-computer interaction:
Safety protection:
Double leakage detection and protection
Emergency stop button protection
Over current, over voltage, under voltage and over
temperature protection
Data record if Power off (can be checked in the
background system if being networked)
Surge protection meets the latest IEC 61851 standard
EMC meets the latest IEC 61851 standard

User Manual
14
Charging plug
V4-DSIEC2b-EV32P V4-DSIEC2e-EV32P
Charging gun : Provide 16A / 32A for choosing
Superior protection performance, the protection
level reaches IP54 (working state)
Certification: CE & TUV

User Manual
15
Product type
SES-32 Charger with cable
SES-32 Charger with socket
Rate voltage
400VAC
400VAC
The max output current
32A/Phase
32A/Phase
Operating frequency
50Hz/60Hz
50Hz/60Hz
The max output power
7-22KW
7-22KW
Human-computer
interaction
LED screen
LED screen
Charging control mode
Charge when insert
Charge when insert
Charging connect type
(IEC)
Case C
Case B
Standby power consumption
2W
2W
Communication mode
/
/
EMI
CISPR22/EN 55022 CLASS B
CISPR22/EN 55022 CLASS B
EMS
EN 61000-4-5 ±2KV/±4KV
perf. Criteria B
EN 61000-4-5 ±2KV/±4KV
perf. Criteria B
Executive standard
EN 61851-1 & EN 61851-22
EN 61851-1 & EN61851-22
Protection Level
IP55(storage)
IP54(Mated with vehicle)
IP55(storage)
IP54(Mated with vehicle)
Operation
Temperature/Humidity
-30-50℃/5%-95%
(non-condensate)
-30-50℃/5%-95%
(non-condensate)
Altitude
<2000m
<2000m
Product Weight
6.5Kg
3.5Kg
Product Size
237mm×343mm×115mm
237mm×343mm×115mm
Installation
Pedestal/wall installation
Pedestal/wall installation
Technical parameters (32A)

User Manual
16
Product type
SES-16 Charger with cable
SES-16 Charger with socket
Rate voltage
400VAC
400VAC
The max output current
16A/Phase
16A/Phase
Operating frequency
50Hz/60Hz
50Hz/60Hz
The max output power
11KW
11KW
Human-computer
interaction
LED screen
LED screen
Charging control mode
Charge when insert
Charge when insert
Charging connect type
Case C
Case B
Standby power consumption
2W
2W
Communication mode
/
/
EMI
CISPR22/EN 55022 CLASS B
CISPR22/EN 55022 CLASS B
EMS
EN 61000-4-5 ±2KV/±4KV
perf. Criteria B
EN 61000-4-5 ±2KV/±4KV
perf. Criteria B
Executive standard
EN 61851-1 & EN 61851-22
EN 61851-1 & EN61851-22
Protection Level
IP55(storage)
IP54(Mated with vehicle)
IP55(storage)
IP54(Mated with vehicle)
Operation
Temperature/Humidity
-30-50℃/5%-95%
(non-condensate)
-30-50℃/5%-95%
(non-condensate)
Altitude
<2000m
<2000m
Product Weight(22KW)
5Kg
3.5Kg
Product Size
237mm×343mm×115mm
237mm×343mm×115mm
Installation
Pedestal/wall
installation
Pedestal/wall installation
Technical parameters (16A)

User Manual
17
Naming
Technical specifications
Regulations
IEC 61851-1
Charging power mode 3
3KW to 22 kW
Nominal voltage
230 V / 400 V / 1/3 AC
Rated current
to 16 A adjustable from 6 to 32 A
in 1 A steps
Nominal frequency
50 Hz
connection technology
Spring clamp technology
Charging connection / coupling
Type 2
Length of charging cable
3,5 m, 5 m, 7,5 m
Operation / status information
LED lights and LED screen
IP class
IP55 (splash proof)
Residual current detection
AC 30mA, DC 6 mA
Ventilation
no ventilation is required
operating temperatur
-30°C - + 50°C
Protection class
I
Overvoltage category
III
Certificaiton
CE & TUV

User Manual
18
● Represents has this function ○ Does not have this function
Module
Function
SES Charger with cable
SES Charger with
socket
plug and charge
●
●
RFID module
IC card charging
●
●
WiFi module
Smart APP Charging
●
●
LED module
LED screen display
●
●
LCD module
The LCD display
○
○
The main board
Full function motherboard
Full function
motherboard
Light with
Top indication
●
●
Light ring
Bottom indication
●
●
Leakage current
transformer
Leakage protection
●
●
Current transformer
Over-current protection
●
●
Voltage transformer
Over-voltage protection
●
●
Under-voltage
protection
●
●
Temperature sensor
Over-temperature
protection
●
●
Emergency stop
button
Emergency stop
●
●
Incoming line through
terminal
●
●
Lightning protection
device
Lightning protection
10000A 8/20us
10000A 8/20us
Watt-hour meter
High precision
measurement
○
○
Internal measurement
●
●
How to charge

User Manual
19
1 Power on after the EV charger is installed
*1：After the charger is turned on, the circular indicator light and the arc indicator light turn
red. At this time, the charger needs to be unlocked with the mobile phone APP.
2 Connect to the charger
2.1 In to the WiFi configuration mode
2.1.1 Use IC card to enter WiFi configuration mode
Please power on again and enter WiFi configuration mode in 2 minutes.
*1
How to use wifi
Press emergency stop switch
and swiping card

User Manual
20
2.1.2 Or use emergency stop switch to enter WiFi configuration mode
2.2 Use your smart phone to connect the charger's WiFi
Note: after being connected to the WiFi network of the charger, the mobile phone may
prompt that it cannot connect to the Internet and keep the current connection.
Find the network of DUOSIDA_XXXX,
enter the password: duosida@cp
Press and release the
emergency stop switch
repeatedly for 3 times
within 10 seconds