Duracell POWER 1000 User manual

POWER 1000 USER MANUAL

ELECTRIC SHOCK HAZARD
Keep away from children. The Unit generates the same potentially lethal AC power as a standard
household wall outlet. To reduce the risk of re or electric shock, do not open the enclosure or expose
the Unit to rain or moisture. Do not insert foreign objects into the AC connection or the ventilation
holes. All AC plugs must be appropriately inserted, and avoid using damaged cables.
EXPLOSION HAZARD
Do not burn or incinerate the Unit. Exposing the Unit to heat or re may cause an explosion and
personal injury or damage. Do not use near ammable gases or fumes or apparatus that produces large
amounts of heat.
IMPORTANT SAFETY INFORMATION
WARNING AND HAZARD TYPES
1. Read all the instructions before using the Duracell Power 1000
(hereinafter referred to as Unit).
2. To reduce the risk of injury, close supervision is necessary
when the Unit is used near children.
3. Do not expose the Unit to rain or snow.
4. Use only recommended Duracell accessories and chargers.
5. Do not expose the Unit to re or excessive temperature. Any such exposure to re or temperature
above 140° F (60° C) may cause an explosion. Do not use near ammable gases or fumes.
6. Do not use the Unit with damaged wires or plugs. It may cause an electric shock.
7. Do not use the Unit if it is damaged or modied. Damaging or modifying the Unit may result in re
or explosion or risk of injury.
8. Make sure to use the Unit in a ventilated environment. Do not restrict the ventilation of the
Unit in any way during usage.
9. During storage, keep the Unit in a dry and ventilated place to avoid moisture and electric shock.
10. Do not disassemble, repair, or modify the Unit or the battery pack. It may cause re, explosion,
injury, and unpredictable risks.
11. This Unit has no serviceable parts. Please visit www.duracell.com or call Duracell Consumer
Relations at 800-551-2355 if you experience any problems with the Unit.
If instructions are not followed, it can cause hospitalization, permanent treatment, or death.
Serious injuries include blindness, burns, electric shock, fractures, poisoning, etc., leading
to complications.
!

SOLAR PANEL
INPUT
IN/OUT
100W
OUT
27W
Fast Charge
USB-C
120V/1000W
13V/5A
X2
13V/10A
USB-A
INCLUDED IN THE PACKAGE
LCD SCREEN
POWER 1000 DETAILS
100 %
Watts
OOO
ACDC USB
888 1888
188%DC USB
Hours Watts
50 Hz
60 Hz
TYPE-C AC
!
888
Hours
1888
Watts
DC
USB
TYPE-C
AC
!
Remaining battery.
It is displayed as a percentage (%)
Remaining Run Time / Charge Time
Total input or output power
DC port ON
USB port ON
IN/OUT USB-C port ON
AC port ON
Fan icon indicates that Fan is ON
Overload warning
Inverter over temperature warning
DC Input LCD Info Screen
AC Output
Car Charger
Output
DC Output
1. POWER STATION 2. AC ADAPTER 4. QUICK START GUIDE
SOLAR PANEL
INPUT
IN/OUT
100W
OUT
27W
Fast Charge
USB-C
120V/1000W
13V/5A
X2
13V/10A
USB-A
USB Output
1 USB-C IN/OUT
1 USB-C OUT
4 USB-A
3. CAR CHARGER CABLE
(To be used for charging
the Unit only)

13V/5A
X2
13V/10A
INPUT
DC12-30V
SOLAR PANEL
INPUT
CHARGING YOUR POWER 1000
Before using or storing the Unit, connect the wall charger to DC Input Port and fully charge
the Unit. The LCD screen will display the charge status, and getting to 100% could take up to 11 hours
depending on the initial battery level. Additionally, the Unit can be connected to a 100W USB-C
charger (in/out USB-C Port) for faster charging. The Type-C USB port has an auto detect function and
no need to press the USB button.
If charging from the car, connect the provided car charger cable to your vehicle’s 12V socket (cigarette
lighter port) and to the Unit’s DC Input Port. Car Charger Cable provided with the Unit is to be used
only for charging the Unit and not used to discharge or to connect to the car charger output port.
If charging from Duracell’s Solar Panel (sold separately), connect it to the DC input using one of
the two plugs provided (Anderson PV connector/DC F6530 plug). The maximum wattage allowed for
solar charging is 195W and the maximum voltage is 30V.
CAR CHARGER CABLE Included (to be used for charging the Unit only)
2124 HRS12V 1012 HRS24V
SOLAR PANEL CHARGER CABLE Not Included
1213 HOURS (depending on weather)
AC ADAPTER Included
1011 HOURS

USING YOUR POWER 1000
STORAGE AND MAINTENANCE
1. Short press any power button to turn the Unit on. (indicated here by the arrow icon )
The LCD screen will light up, and the battery level indicator will display. From there, you need to
turn the output port(s) by pressing the button again. The Unit will beep when the ports turn ON.
2. The 100 W USB-C (in/out) has an auto detect function, and the power turns ON immediately by
connecting the device. For other ports, short press the power button of the ports you wish to use
(DC, USB, or AC).
3. Ports icon will appear on the LCD screen, indicating that the ports are on and ready to use.
4. Connect your device to the desired port/outlet.
5. AC outlets can only charge/power devices rated less than 1000 Watts.
Once this limit is exceeded, the Unit will shut OFF automatically.
6. The AC port output will turn OFF automatically after 2 hours if no load is detected.
7. The DC port or car charger port will turn OFF automatically in 8 hours if no load is detected.
8. LCD screen will automatically dim and shut down after 60 seconds when all ports are
OFF or not in use.
9. To turn the LED light press the button above it. Click again to cycle through the dierent
modes (Low – High – SOS – OFF).
10. If the Unit won’t be used for a long period of time, it should be recharged every 3-6 months
and keep the power above 80%. Please keep it in a cool and dry place.
1. Please keep the Unit in a cool and well-ventilated environment, away from any
source of water, heat or ammable gases.
2. For long-term storage, please recharge the Unit every 3-6 months to make
sure it’s always above 80%.
3. To prolong the life of the Unit, keep the Unit above 80% state of charge.
100 %
Watts
OOO
DC ACUSB
DC USB
AC

TROUBLESHOOTING
PROBLEM SOLUTION
Unit is not charging. Make sure the wall charger is connected properly. Make sure
Unit is within operating temperature range. If Unit is too
cold or too hot, it will not charge.
Ensure the Port/outlet has been turned on. Check the port
icon is shown on the LCD display, meaning the port is ON.
Check the battery charge level on the LCD screen. It should
be at least >5%. Check for warning signs on the LCD screen
to ensure the Unit is not overloaded or out of the operating
temperature range.
Unit is overheated, make sure fan vents are not covered to
allow proper air ow and allow the Unit to cool down to
operating temperature.
This means that the load connected exceeds the power rating
of the AC port (1000W). Disconnect your device from the Unit,
turn the port ON again and try connecting a device that
doesn’t exceed the power rating.
This is a normal operation of the Unit. When the AC port is
turned ON, the fan will do self-diagnostic and turn ON
momentarily. LCD will show up as a fan icon temporarily.
Cooling fan will also kick in when the inverter overheats.
Unit is not charging or
powering my device.
Unit is not charging or powering
my devices and overheat icon
blinking on screen.
Unit is beeping and overload
warning displayed on screen.
I can hear the cooling fan
inside the Unit and a fan icon
is displayed on the screen.
If you are still experiencing problems with you Duracell Power Station, please
visit www.duracell.com or call Duracell Consumer Relations at 800-551-2355.
!

FREQUENTLY ASKED QUESTIONS
1. What battery does my Power 1000 use?
It uses high performance lithium-ion cells.
2. What devices can my Power 1000 power?
With 1000W continuous power, the Unit can power a wide range of electronic
devices and home appliances. We recommend checking the rated power of
equipment to be connected to this Unit to make sure the sum of all of them
do not exceed 1000W.
3. How long will my Power 1000 keep my devices running?
That will depend on the power consumption of each connected device. The LCD
screen will indicate the remaining run time based on the connected load.
4. How to store my Power 1000?
Before storing, please turn o the Unit rst and then store it in a dry, ventilated
place at room temperature (42-85˚F). Do not place it near water sources. For
long-term storage, recharge every 3-6 months to ensure the battery is always above
80% to protect the battery life.
5. Can I recharge my Power 1000 while using it?
Yes, the Power 1000 can be charged and used at the same time, but it will extend
the recharge time.
6. Can my Power 1000 be used as an Uninterrupted Power Supply (UPS)?
No, the Power 1000 is not designed to be used as a UPS.
7. Can I bring my Power 1000 on a plane?
Check with the Airline.
?
DISPOSAL AND RECYCLING
Recycle the Unit responsibly and according to local, state, and national
regulations applicable to lithium-ion rechargeable batteries.

WARRANTY INFORMATION
FCC STATEMENT
Duracell oers a 24-month limited warranty from the date of purchase. Keep a copy of your purchase
receipt as proof of purchase. Our product’s warranty is limited only to the Unit itself when used
normally in accordance with the operating instructions and the system environment. The customer
acknowledges and agrees that:
• Duracell is not liable for damage or loss resulting from the use of this product
or for any claim from a third party.
• Duracell is not liable for problems with any electronic devices or home
appliances or any other hardware arising from the use of this product, the
suitability of the product for specic hardware, software, or peripherals,
operating conicts with other installed software, data loss, or other accidental
or unavoidable damages.
• Duracell is not liable for nancial damages, lost prots, claims from third
parties, etc., arising from the use of this product.
For more information regarding our product line, customer service and warranty information please
contact Duracell Consumer Relations at 800-551-2355 or visit our website: www.duracell.com
This device complies with Part 15 of the FCC Rules and Class B Digital Device limits
which provide protection against interference in a residential installation. Operation
is subject to the following two conditions: (1) this device may not cause harmful
interference (2) this device must accept any interference received, including
interference that may cause undesired operation. This device generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause interference to radio/TV communications for
which the manufacturer is not responsible. Should interference occur, correct by
connecting the device to another outlet on a dierent circuit.

SPECIFICATIONS
MODEL PPS1000-1050-120-01
BATTERY
Chemistry Li-Ion
Maximum Capacity 1050Wh ([email protected])
Lifecycles 500 Cycles to 80% capacity
Storage Requirement Recharge every 3-6 months
Protection Systems* Over & Under Temperature Protection,
Short Circuit Protection, Overload Protection,
Battery Over Charge and Over Discharge
Protection, DC Input Reverse
Polarity Protection.
PORTS
2x USB-A Port (Output) 5V @ 2.4A per port
2x USB-A Fast Charge Port (Output) 5V@3A, 9V@ 2A, [email protected] 18W Max per port
USB-C Port (Input/Output) 100W Maximum
USB-C Port (Output) 27W
3x 120V AC Port (Output, Pure Sine Wave) 120V, 60Hz (1000W continuous, 2000W Peak)
13V Cigarette Lighter Port (Output) 13V up to 10A
2x DC Port (Output) 13V up to 5A per port
DC Charging Port (Input) 12-30V @6.5A (195W Maximum) DC F6530
connector
Solar Charger Anderson Port 12-30V @ 6.5A (195Wp Maximum)
CHARGE TIME
Wall Charger (120W Charger) 10-11Hrs
Solar Panels 12-13Hrs
Car Charger 21-24Hrs(12V) 10-12Hrs(24V)
Type C 100W PD charging 12-13Hrs
Wall Charger (120W Charger) + Type C 100W 5-6Hrs
GENERAL
Dimensions 13.38*9.29*8.11in (34*23.6*20.6cm)
Weight 24.6lbs (11.15Kg)
Operating Temperature 32-104˚F (0-40˚C)
Storage Temperature 42-85˚F (6-29˚C)
Certications FCC/DOE/CEC/ETL/RoHS
Warranty 24 Months
The Unit will have the following protection alarms:
Beeps 2 times: Overload protection, shuts down the port.
Beeps 5 times: Over temperature protection, shuts down AC port.
Beeps 7 times: Battery UVP (Once at 5% SOC and again at 0% SOC).
Beeps 8 times: Short circuit protection, shuts down the port.
Beeps 9 times: No load shutdown, Unit shutdown normally.
Beeps 10 times: Abnormal communication between the master controller of the Unit and Inverter, AC icon will
blink and the AC port will shut down.
Beeps 11 Times: Battery related faults. Unit shuts down any charge and discharge.
*