Duren 625626 Specification sheet
www.duren.co.uk
Part Code: 625623
150mm Air DA Orbital Palm Sander
Instrucon Manual
PLEASE KEEP THIS MANUAL SAFE FOR FUTURE REFERENC
E
Product Instruction Manual
625626 75mm Air Polisher Manual.indd 1 13/09/2017 14:31
IMPORTANT
Please read through this Manual carefully before using the 625628.
This tool must only be used for spraying and within the parameters
outlined in this manual. All users of the equipment should be trained in any
risks associated with the products they are spraying or using as spraying
and finishing aids.
Tool Use
This Air Operated Dual Action Sander is designed for the purpose of sanding a variety
of coatings from steel, wood, plastics, etc.
625626
Instruction Manual
Safety Instructions
These instructions are intended as a guide to the correct use of this equipment. The process or
materials being sanded may have risk characteristics requiring additional safety measures and
these must be identified by the user. All users of this sander must be thoroughly acquainted
with this manual.
Before Use and Before Using Tool for the First Time
- Make sure you have the relevant Personal Protection Equipment (PPE).
Hand Protection
The pad revolves at high speed and may cause damage if bought into contact with
exposed flesh. The workpiece and the pad may also get hot after prolonged use.
Hand protection must be strong enough to protect the skin and be a good fit and
have no loose parts that may get caught in rotating parts.
Duren Tools
www.duren.co.uk
Determination of the test
results includes consideration
of measurement uncertainty
from the test equipment and
methods.
*Uncertainty zK: 1.44m/s2
Specification
Pad Diameter 3”/75mm
Pad Thread Size 3/8”
Free Speed 3,500RPM
Maximum Pad Speed 20,000RPM
Operating Pressure 6.3BAR
Air Consumption 3.5CFM
Air Inlet 1/4” BSP
Vibration Level 1.5m/s2 Max
Noise Level 98aD(A) Max
Weight 700g
Length 206mm
www.duren.co.uk
Part Code: 625623
150mm Air DA Orbital Palm Sander
Instrucon Manual
PLEASE KEEP THIS MANUAL SAFE FOR FUTURE REFERENCE
625626 75mm Air Polisher Manual.indd 2 13/09/2017 14:31
625626
Instruction Manual
Duren Tools
www.duren.co.uk
Eye and Breathing Protection
The sanding process will create dust and other airborne particles. There is a dust
extraction function on this machine but it is still essential that approved eye and
breathing protection is worn to protect users in the event of unintentional disconnection
or damage of the bag or hose.
Noise and Ear Protection
Depending on the material being worked on and the type of sanding disc used, noise
levels may cause hearing damage including temporary or even permanent hearing loss.
It is recommended that Ear Protection is worn at all times when using the sander.
Repetitive Strain Injury (RSI)
All products of this nature can cause RSI if used for long period, particulary in an
awkward operating position. Adequate rest periods and working conditions should be
considered for prolonged use.
General Safety Information
1 Ensure the sanding pad is equal to or greater than 120% of the stated RPM of the
sander.
2 Keep the workplace clean and tidy.
3 Use the tool in a well ventilated area.
4 Air hoses can present a trip hazard, always keep hoses in a way that minimises trip
hazards.
5 DO NOT hold the workpiece by hand, always make sure the workpiece is clamped
securely.
6 Keep all flammable and combustible materials away from the work area.
7 Children and other unauthorised persons should be kept away from the work area.
8 NEVER use the sander whilst the floor underfoot is wet or slippery.
9 NEVER use the sander when standing on an unstable surface.
10 Keep the sander out of reach of children.
11 Analyse the material you are sanding. Be aware of the dangers of sanding lead based
paints. Historically, paint contained lead and sanding such paint will cause toxic dust. If
you suspect that lead could be in the paint the following actions must be observed;
- Alert any other persons in the nearby and keep them away from the working
area.
- Use specific air fed respirator, PE coated coveralls and latex gloves.
- Dispose of any dust and paint waste correctly and thoroughly clean the
workpiece and working area after the sanding has finished.
12 NEVER attempt to sand materials containing asbestos.
13 VIBRATION. Hand held air tools may produce vibration. Vibration from sanders can
cause disease. The use of gloves will help reduce the risk and can help prevent injury.
14 Disconnect the air supply before changing disc or pad.
15 Ensure the sander has stopped rotating before putting it down or handling the pad or
disc.
16 NEVER carry the sander by the air hose.
17 NEVER point the sander at other persons.
18 NEVER operate the sander whilst under the influence or drugs, alcohol or intoxicating
medication.
19 Check you have no loose clothing, hair, jewellery or any other items of a personal nature
that might become entangled with the rotating parts.
20 Check you have a maximum inlet air pressure of 90PSI/6.3BAR.
PLEASE KEEP THIS MANUAL SAFE FOR FUTURE REFERENCE
Duren Tools, UK
E: sales@duren.co.uk W: www.duren.co.uk
T: 01582 484875
625626 75mm Air Polisher Manual.indd 3 13/09/2017 14:31
Fast Mover Tools Limited
W: www.fastmovertoolsuk.com
Fast Mover Tools Limited
W: www.fastmovertoolsuk.com
625623
Instrucon Manual
Duren Tools, UK
E: sales@duren.co.uk W: www.duren.co.uk
T: 01582 484875
Fig.
1
Air Filter/Regulator
/Lubricator
Whip
Hose
Airline
Air Fitting
Quick Release Air Coupling
To Air Tool
Fig.
2
We recommend that your air tool is connected to the
main airline in the way displayed in Fig. 2.
1: Air Tool
2: Whip Hose/Leader Hose
3: Air Fitting
4: Quick Coupling
5: Main Air Hose
5
1
4
3
2
Air
Source
Familiarise Yourself with the Controls
1 The throttle is pressure sensitive.
Applying pressure will increase
rotational speed.
2 Removal of all pressure will stop the
machine.
3 Your tool comes with a Regulator,
make sure that this is in the off
position when not in use or to prevent
unintentional starts.
4 Never leave the tool unattended and
connected to the power supply.
During Use
1 When using the sander for long periods of time, check the sanding disc for wear.
2 Replace worn discs as worn or clogged discs will make the sander inefficient.
3 The sanding operation will cause heat. Check the material that is being worked on that it
is not getting too hot. If this is occurring, stop sanding to allow the material to cool down.
4 You can adjust the speed of the tool by adjusting the pressure you apply to the throttle.
5 Make regular checks on the sanding pad for wear and damage and replace them
immediately.
6 Due to the potential heat caused by the sanding process, keep flammable liquids and
gases well away from the work area.
Installation
1 Check the tool over to make sure no part is missing or damaged.
2 Fitting an Air Filter, Regulator and Lubricator is recommended.
3 Refer to Fig. 1 for the recommended airline setup.
Pad
Grip
Throttle
Dust Extraction
Connection
Inlet
Dust Extraction
Hose
625626
Instruction Manual
625626 75mm Air Polisher Manual.indd 4 13/09/2017 14:31
Fast Mover Tools Limited
W: www.fastmovertoolsuk.com
Fast Mover Tools Limited
W: www.fastmovertoolsuk.com
625626
Instruction Manual
PLEASE KEEP THIS MANUAL SAFE FOR FUTURE REFERENCE
Duren Tools, UK
E: sales@duren.co.uk W: www.duren.co.uk
T: 01582 484875
4 It is strongly advised that you always use a Whip Hose/Leader Hose in combination with
Quick Release Couplings. See Fig. 2 for recommended setup.
5 Water in the air supply will cause the internal bearing of the tool to rust and eventually
seize.
6 Make sure that your airline is free from water at all times.
7 Always select the correct sanding disc grit for the job.
Tools Included with your Sander
1 x High Flow Male Air Fitting
Vacuum Hose Fitment
Maintenance
1 If the air supply is not lubricated sufficiently it will be necessary to lubricate the tool
directly. This can be done by disconnecting the air hose and pouring in 5ml of air tool oil
into the Air Inlet. Read safety data sheet or instructions on use of oil to ensure safe
usage. These can be obtained from your supplier.
2 Replace worn or damaged parts using genuine parts only.
3 Store tool in a dry area, do not allow tool to be immerse in water or used/stored in wet
conditions.
4 To empty dust bag, open zip (see image left) and tip into a suitable waste container.
PLEASE KEEP THIS MANUAL SAFE FOR FUTURE REFERENCE
Duren Tools, UK
E: sales@duren.co.uk W: www.duren.co.uk
T: 01582 484875
4 It is strongly advised that you always use a Whip Hose/Leader Hose in combination with
Quick Release Couplings. See Fig. 2 for recommended setup.
5 Water in the air supply will cause the internal bearing of the tool to rust and eventually
seize.
6 Make sure that your airline is free from water at all times.
7 Always select the correct sanding disc grit for the job.
Tools Included with your Sander
1 x High Flow Male Air Fitting
Vacuum Hose Fitment
Maintenance
1 If the air supply is not lubricated sufficiently it will be necessary to lubricate the tool
directly. This can be done by disconnecting the air hose and pouring in 5ml of air tool oil
into the Air Inlet. Read safety data sheet or instructions on use of oil to ensure safe
usage. These can be obtained from your supplier.
2 Replace worn or damaged parts using genuine parts only.
3 Store tool in a dry area, do not allow tool to be immerse in water or used/stored in wet
conditions.
4 To empty dust bag, open zip (see image left) and tip into a suitable waste container.
PLEASE KEEP THIS MANUAL SAFE FOR FUTURE REFERENCE
Duren Tools, UK
E: sales@duren.co.uk W: www.duren.co.uk
T: 01582 484875
4 It is strongly advised that you always use a Whip Hose/Leader Hose in combination with
Quick Release Couplings. See Fig. 2 for recommended setup.
5 Water in the air supply will cause the internal bearing of the tool to rust and eventually
seize.
6 Make sure that your airline is free from water at all times.
7 Always select the correct sanding disc grit for the job.
Tools Included with your Sander
1 x High Flow Male Air Fitting
Vacuum Hose Fitment
Maintenance
1 If the air supply is not lubricated sufficiently it will be necessary to lubricate the tool
directly. This can be done by disconnecting the air hose and pouring in 5ml of air tool oil
into the Air Inlet. Read safety data sheet or instructions on use of oil to ensure safe
usage. These can be obtained from your supplier.
2 Replace worn or damaged parts using genuine parts only.
3 Store tool in a dry area, do not allow tool to be immerse in water or used/stored in wet
conditions.
4 To empty dust bag, open zip (see image left) and tip into a suitable waste container.
625626 75mm Air Polisher Manual.indd 5 13/09/2017 14:31
No. Description Qty No. Description Qty
1 PAD 1
2 Locking Ring 1
3 Connect The Head 1
4 Bearing 1
5 Pin 2
6 Idler 2
7 Planet Cage incl 1
8 Gear Ring 1
9 Bearing 1
10 Cylinder Head Gasket 1
11 Bearing 1
12 Front Cylinder Head 1
13 Straight Pin 2
14 Blade 4
15 Rotor 1
16 Cylinder 1
17 Cylinder Head 1
18 Bearing 1
19 L Connector 1
20 Screw 1
21 Oil Inlet 1
22 Sealing Gasket 1
23 Nut 1
24 Jacket 1
25 0-Ring 1
26 Connect The Head 1
27 0-Ring 1
28 Housing 1
29 Trigger 1
30 Rivet 1
31 0-RING 1
32 0-Ring 1
33 Pin 1
34 Pin Spring 1
35 0-Ring 1
36 Nut 1
37 0-Ring 1
38 Muffle Cover 1
39 0-Ring 1
40 The Straight Blade 1
41 14mm wrench 1
625626
Parts Diagram
Air Operated 3” Angle Sander
625626 75mm Air Polisher Manual.indd 6 13/09/2017 14:31
625623
Instrucon Manual
Duren Tools, UK
E: sales@duren.co.uk W: www.duren.co.uk
T: 01582 484875
Declaration of Conformity
We declare that the equipment detail below, to the best of our knowledge and
ability, complies with the following Directive.
Machinery Directive - 2006/42/EC and amending Directives
Equipment Description Air Operated Orbital 6” Palm Sander
Part Code 625623
Distributed in the EU by Duren Tools, a subsidiary of Fast Mover Tools Ltd
Address Unit 1 Frenchs Avenue
Dunstable
Bedfordshire
LU6 1BH
United Kingdom
The following Transposed Harmonised Standards have been applied in the
design and construction of this equipment:
BSEN12100: Parts 1 and 2: Safety of Machinery - Basic concepts, general principles of
design
BSEN792: Part 8: Hand held, non-electric power tools - Safety requirements - Sanders
and polishers
The manufacturer and the distributor, stated above, hold the Technical Construction File for this
equipment.
Signed on behalf of the distributor
(the responsible person) …………………………………………
Name: Brian Moffitt
Position: Director
Date and Place: 01/11/13, Dunstable, UK
Please look after the environment, dispose of all packaging in a responsible way.
Always dispose of tools in accordance with local authority guidelines.
© 2013 Fast Mover Tools. This document is copyright and is not to be copied, circulated, distributed or shown to
anyone other than the intended recipient without the express permission of Fast Mover Tools.
625623
Instrucon Manual
Duren Tools, UK
E: sales@duren.co.uk W: www.duren.co.uk
T: 01582 484875
Declaration of Conformity
We declare that the equipment detail below, to the best of our knowledge and
ability, complies with the following Directive.
Machinery Directive - 2006/42/EC and amending Directives
Equipment Description Air Operated Orbital 6” Palm Sander
Part Code 625623
Distributed in the EU by Duren Tools, a subsidiary of Fast Mover Tools Ltd
Address Unit 1 Frenchs Avenue
Dunstable
Bedfordshire
LU6 1BH
United Kingdom
The following Transposed Harmonised Standards have been applied in the
design and construction of this equipment:
BSEN12100: Parts 1 and 2: Safety of Machinery - Basic concepts, general principles of
design
BSEN792: Part 8: Hand held, non-electric power tools - Safety requirements - Sanders
and polishers
The manufacturer and the distributor, stated above, hold the Technical Construction File for this
equipment.
Signed on behalf of the distributor
(the responsible person) …………………………………………
Name: Brian Moffitt
Position: Director
Date and Place: 01/11/13, Dunstable, UK
Please look after the environment, dispose of all packaging in a responsible way.
Always dispose of tools in accordance with local authority guidelines.
© 2013 Fast Mover Tools. This document is copyright and is not to be copied, circulated, distributed or shown to
anyone other than the intended recipient without the express permission of Fast Mover Tools.
625623
Instrucon Manual
Duren Tools, UK
E: sales@duren.co.uk W: www.duren.co.uk
T: 01582 484875
Declaration of Conformity
We declare that the equipment detail below, to the best of our knowledge and
ability, complies with the following Directive.
Machinery Directive - 2006/42/EC and amending Directives
Equipment Description Air Operated Orbital 6” Palm Sander
Part Code 625623
Distributed in the EU by Duren Tools, a subsidiary of Fast Mover Tools Ltd
Address Unit 1 Frenchs Avenue
Dunstable
Bedfordshire
LU6 1BH
United Kingdom
The following Transposed Harmonised Standards have been applied in the
design and construction of this equipment:
BSEN12100: Parts 1 and 2: Safety of Machinery - Basic concepts, general principles of
design
BSEN792: Part 8: Hand held, non-electric power tools - Safety requirements - Sanders
and polishers
The manufacturer and the distributor, stated above, hold the Technical Construction File for this
equipment.
Signed on behalf of the distributor
(the responsible person) …………………………………………
Name: Brian Moffitt
Position: Director
Date and Place: 01/11/13, Dunstable, UK
Please look after the environment, dispose of all packaging in a responsible way.
Always dispose of tools in accordance with local authority guidelines.
© 2013 Fast Mover Tools. This document is copyright and is not to be copied, circulated, distributed or shown to
anyone other than the intended recipient without the express permission of Fast Mover Tools.
Declaration of Conformity
We declare that the equipment detail below, to the best of our knowledge and
ability, complies with the following Directive.
Machinery Directive - 2006/42/EC and amending Directives
Equipment Description Air Operated Orbital 3” Angle Sander
Part Code 623628
Distributed in the EU by Duren Tools, a subsidiary of Fast Mover Tools Ltd
Address Unit 1 Frenchs Avenue
Dunstable
Bedfordshire
LU6 1BH
United Kingdom
The following Transposed Harmonised Standards have been applied in the
design and construction of this equipment: BSENISO 11148 - 8: 2012
The manufacturer and the distributor, stated above, hold the Technical Construction File
for this equipment.
Signed on behalf of the distributor.
(the responsible person) .............................................
Name: Brian Moffitt
Position: Director
Date and Place: 01/05/17 Dunstable, UK
© 2017 Duren Tools. This document is copyright and is not to be copied, circulated, distributed or shown to
anyone other than the intended recipient without the express permission of Duren Tools.
625626 75mm Air Polisher Manual.indd 7 13/09/2017 14:31
FMT3006
Instrucon Manual
Fast Mover Tools Limited
T: 01582 661993 F: 01582 667100 E: sales@fastmovertoolsuk.com
W: www.fastmovertoolsuk.com
Please look after the environment, dispose of all packaging in a responsible way.
Always dispose of tools in accordance with local authority guidelines.
© 2014 Fast Mover Tools Ltd. This document is copyright and is not to be copied, circulated, distributed or shown
to anyone other than the intended recipient without the express permission of the directors.
Warranty
We hope that you will be very happy with your purchase. If you do have a problem with your tool, you have the
added peace of mind of a 6 month warranty, which comes into date from the date of purchase (proof of purchase
required).
Scope of Warranty
- The warranty will cover you from all faults cause by defective components or poor workmanship.
- Tools sent outside the EU are not covered by this warranty.
- Product must be returned to us, the warranty does not cover cost of carriage.
- If the product is no longer in manufacture, it will be replaced with a tool of equivalent or higher specification.
What is not covered
- Normal wear and tear caused by use in accordance with the operating instructions.
- Replacement of any provided accessories, such as Backing Pads, Airline Connections, Air Fittings, Blades,
Spanners, etc.
- Accidental damage, faults caused by negligent use or care, neglect, misuse or careless operation, handling and
storage of the product.
- Modification of, or change of, any part of this product in any way.
- Faults caused by use of non compatible accessories.
- Tool seizure caused by insufficient oiling.
- Faults caused by incorrect installation.
- Repairs or alterations carried out by non-approved parties.
- Traced of water or rust inside tool - this shows that a properly working air filter has not been used.
Validity
- This warranty is valid for 6 months after date of purchase.
- Warranty is rendered invalid if;
- Tool is taken apart for any reason without our consent.
- Tool is not maintained daily.
- Air supply line is not used with a properly working air filter.
FMT3006_Product Instructions 19/09/2014 11:23 Page 8
FMT3006
Instrucon Manual
Fast Mover Tools Limited
T: 01582 661993 F: 01582 667100 E: sales@fastmovertoolsuk.com
W: www.fastmovertoolsuk.com
Please look after the environment, dispose of all packaging in a responsible way.
Always dispose of tools in accordance with local authority guidelines.
© 2014 Fast Mover Tools Ltd. This document is copyright and is not to be copied, circulated, distributed or shown
to anyone other than the intended recipient without the express permission of the directors.
Warranty
We hope that you will be very happy with your purchase. If you do have a problem with your tool, you have the
added peace of mind of a 6 month warranty, which comes into date from the date of purchase (proof of purchase
required).
Scope of Warranty
- The warranty will cover you from all faults cause by defective components or poor workmanship.
- Tools sent outside the EU are not covered by this warranty.
- Product must be returned to us, the warranty does not cover cost of carriage.
- If the product is no longer in manufacture, it will be replaced with a tool of equivalent or higher specification.
What is not covered
- Normal wear and tear caused by use in accordance with the operating instructions.
- Replacement of any provided accessories, such as Backing Pads, Airline Connections, Air Fittings, Blades,
Spanners, etc.
- Accidental damage, faults caused by negligent use or care, neglect, misuse or careless operation, handling and
storage of the product.
- Modification of, or change of, any part of this product in any way.
- Faults caused by use of non compatible accessories.
- Tool seizure caused by insufficient oiling.
- Faults caused by incorrect installation.
- Repairs or alterations carried out by non-approved parties.
- Traced of water or rust inside tool - this shows that a properly working air filter has not been used.
Validity
- This warranty is valid for 6 months after date of purchase.
- Warranty is rendered invalid if;
- Tool is taken apart for any reason without our consent.
- Tool is not maintained daily.
- Air supply line is not used with a properly working air filter.
FMT3006_Product Instructions 19/09/2014 11:23 Page 8
Warranty
We hope that you will be very happy with your purchase. If you do have a problem with your tool, you have the
added peace of mind of a 6 month warranty, which comes into date from the date of purchase (proof of purchase
required).
Scope of Warranty
- The warranty will cover you from all faults cause by defective components or poor workmanship.
- Tools sent outside the EU are not covered by this warranty.
- Product must be returned to us, the warranty does not cover cost of carriage.
- If the product is no longer in manufacture, it will be replaced with a tool of equivalent or higher specification.
What is not covered
- Normal wear and tear caused by use in accordance with the operating instructions.
- Replacement of any provided accessories, such as Backing Pads, Airline Connections, Air
Fittings, Blades, Spanners, etc.
- Accidental damage, faults caused by negligent use or care, neglect, misuse or careless operation,
handling and storage of the product.
- Modification of, or change of, any part of this product in any way.
- Faults caused by use of non compatible accessories.
- Tool seizure caused by insufficient oiling.
- Faults caused by incorrect installation.
- Repairs or alterations carried out by non-approved parties.
- Traces of water or rust inside tool - this shows that a properly working air filter has not been used.
Validity
- This warranty is valid for 6 months after date of purchase.
- Warranty is rendered invalid if;
- Tool is taken apart for any reason without our consent.
- Tool is not oiled daily.
- Air supply line is not used with a properly working air filter.
- A warranty claim will not be accepted without an official proof of purchase from your supplier.
Please look after the environment, dispose of all packaging in a responsible way.
Always dispose of tools in accordance with local authority guidelines.
625626
Instruction Manual
625626 75mm Air Polisher Manual.indd 8 13/09/2017 14:31
Table of contents
Other Duren Sander manuals
