Durite 0-775-00 Instruction Manual

Call 01255 555200
Email [e-mail]
Visit www.durite.co.uk
Durite 7” 1080p AHD Mirror Monitor Camera system. Sony 1/2.8” AHD CMOS IMX307, IP68 with microphone. Supplied with
20M extension cable and remote. UKCA, CE. E Marked R10 EMC.
0-775-00 - 7” 1080p AHD Mirror Monitor Camera System
TECHNICAL SPECIFICATIONS
THE TRUSTED QUALITY BRAND FOR PROFESSIONALS

WARNINGS
Before using this unit please read these instructions carefully.Take special care to follow
the warnings and safety suggestions listed below. Keep these instructions for future reference.
There are no user-serviceable parts within the unit, refer servicing to qualied service
personnel.
PRECAUTIONS
• Please ensure you are familiar and comply with local trafc and driving regulations.
• Connection -The camera should only be connected to a Durite cctv system.
• Heat - Do not install the camera near heat sources.
• Mounting - Ensure the camera is facing the desired direction before xing the camera
base. If xing to isolated return chassis the camera bracket should be isolated from the
vehicle chassis.
• Service -The user should not attempt to service these units beyond that described in these
instructions. All other servicing should be referred to an authorised service technician.
GENERAL
The camera has a CMOS image sensor which gives a high quality picture and its solid state
circuitry provides extremely long life. Compact size and single connection make it easy
to install. Automatic gain control (AGC) provides a clear image in both strong sunlight
and low light conditions. It is recommended that all camera lead connections are additional-
ly sealed by either wrapping with a suitable tape or application of heat shrink sleeving. It is
recommend to connect the system and test before xing to ensure the correct eld of view is
displayed.

OPERATION

PARKING GUIDELINES
This CCTV reversing system has the option for parking guidelines.These can be turned on/off
in the main menu.To turn on/off select MENU > GUIDE LINE> ON/OFF.The guidelines will only
appear while trigger 1 (Yellow) or trigger 2 (Blue) are engaged.
SYSTEM DIAGRAM
CAMERA 4 PIN MONITOR 4 PIN

Display Device 7” ColourTFT LCD
Interface DigitalTTL
Luminance (Nits) 500
System PAL / NTSC (auto)
Video signal format type CVBS / AHD
P/N system resolution 1024 x RGB x 700
Video frame 60FPS
Contrast Ratio 500:1
Power Consumption 5W Max
Power Supply 10-30V
View Angle (LR/UD) L 60, R 60, U 40, D 60 (Degree’s)
Connection 4 PIN Aviation (Please see system diagram)
Weight 0.436Kg
Vibration 10G
Operating temperature -20°C ~ 70°C, RH95% MAX
Storage temperature -30°C ~ 70°C, RH95% MAX
Dimensions L 249.5 x W 40.0 x H 108.0mm
Certicates UKCA CE E Mark R10 EMC
TECHNICAL SPECIFICATIONS - Monitor

Call 01255 555200
Email [e-mail]
Visit www.durite.co.uk
TECHNICAL SPECIFICATIONS - Camera
*not to scale
Image sensor 1/2.8” Sony AHD1080P CMOS IMX307
Resolution 1920(H)X1080(V) pixels
Lens 2.8mm
Video Mode 60FPS
Viewing angle 120° H, 95° V
TV System PAL
Sensitivity 0 LUX with IR on
Night vision distance Upto 8 Metres
Image mode Normal
Vibration 10G
IRLED light 18 LED’s
Power voltage 12VDC
Audio YES
WDR YES
AGC YES
Electronic Shutter Auto
Waterproof rating IP68
Current Draw at 12V 200mA
Camera connector type 4 PIN Aviation (Please see system diagram)
Weight 0.360Kg
Dimensions L 84 x W 76 x H 70mm
Operating temperature -20°C ~ 70°C, RH95% MAX
Storage temperature -30°C ~ 75°C, RH95% MAX
Dimensions Please see below diagram
Certicate UKCA CE, E Marked R10 EMC
TECHNICAL SPECIFICATIONS