Duronic DM553 User manual

11
2.8-5kgs/6-11lbs
Load
15” - 27” 75x75, 100x100
VESA
-90°/+85°
Tilt
180°
Swivel
Rotate
360°
Max weight 11 lbs-5kg
CAUTION: DO NOT EXCEED
MAXIMUM LISTED WEIGHT
CAPACITY.SERIOUS INJURY
OR PROPERTY DAMAGE MAY
OCCUR!
Note:This product will need tension adjustments once installation is complete,Make sure all
equipment is properly installed on the product before attempting tension adjustments.
Any time equipment is added or removed from this product,resulting in a change in the weight
of the mounted load,you should repeat these adjustment steps to ensure safe and optimum
operation.Adjustments should move smoothly and easily through the full range of motion and
stay where you set it.If adjustments are dicult and do not stay in the desired position,follow
the instructions to loosen or tighten the tension to create a smooth,easy adjustment motion.
Nota:Una vez instalado,este producto necesita ajustes de tensión.Antes de realizar los ajustes de
tensión,cerciórese de que todo el equipo está bien instalado en el producto.Cada vez que se ag-
regue o quite equipo de este producto y cambie el peso de la carga montada,deberá repetir estos
ajustes para garantizar un funcionamiento seguro
-
-
-
-
EN-INSTRUCTION MANUAL
ES-MANUAL DE INSTRUCCIONES
FR-MANUEL D’INSTRUCTIONS
DE-BENUTZERHANDBUCH
IT -MANUALE DI ISTRUZIONI
Product A Product B
OR
DM553

ATTENTION:SI VOUS NE LISEZ,NI NE COMPRENEZ,NI NE SUIVEZ SOIGNEUSEMENT TOUTES
CES INSTRUCTIONS,IL POURRAIT S’ ENSUIVRE DES BLESSURES GRAVES,DES DOMMAGES
MATÉRIELS OU L’ANNULATION DE LA GARANTIE!
L'installateur est responsable de s’assurer de l’exactitude de l’assemblage et de l’installation de toutes
les composantes, conformément aux instructions fournies. Si vous ne comprenez pas ces instructions ou
pour toute question ou problème, veuillez contacter le service à la clientèle.Si le produit est endommage
ou que des fixations sont manquantes ou endommagees,n’installez pas le produit.Si vous avez besoin
de pièces ou de quincaillerie de rechange, veuillez contacter le Service à la clientèle Pour les clients
internationaux, contactez le détaillant auprès duquel vous avez acheté le produit.
01 10
ESPAÑOL
DISCLAIMER - WARNING INFORMATION
FRANÇAIS
WARNING:FAILURE TO READ,THOROUGHLY UNDERSTAND,AND FOLLOW ALL INSTRUCTIONS
CAN RESULT IN SERIOUS PERSONAL INJURY,DAMAGE TO PERSONAL PROPERTY,OR VOIDING
OF FACTORY WARRANTY!
It is the responsibility of the installer to ensure all components are properly assembled and installed
using the instructions provided.If you do not understand these instructions or have any questions or
concerns,please contact customer service.Do not attempt to install or assemble this product if the
product or hardware is damaged or missing. In the event that replacement parts or hardware are
needed, please contact Customer Service. International customers needing assistance should contact
the Dealer from which they purchased the product.
ADVERTENCIA:NO LEER,ENTENDER CABALMENTE O SEGUIR TODAS LAS INSTRUCCIONES
PUEDE DERIVAR EN LESIONES GRAVES,DAÑOS MATERIALES O LA NULIDAD DE LA GARANTIA
OTORGADA POR EL FABRICANTE.
Es responsabilidad del instalador comprobar que todos los componentes estén correctamente
ensamblados e instalados según las instrucciones provistas. Si usted no entiende estas instrucciones o
si tiene dudas o preguntas, comuníquese con Atención al Cliente.
No instale ni ensamble el producto si éste o las piezas suministradas presentaran daños o si faltara
algún elemento. Si necesita repuestos o piezas, comuníquese con Atención al Cliente.
Si reside en otro país, comuníquese con la tienda donde compró el producto.
DEUTSCH
ITALIANO
WARNUNG: LESEN SIE DIESES HANDBUCH SORGFÄLTIG DURCH UND BEFOLGEN SIE DIE
ANWEISUNGEN. EINE NICHTBEACHTUNG DERSELBEN KANN ZU SCHWEREN VERLETZUNGEN,
SACHSCHADEN ODER ZUM ERLÖSCHEN DER WERKSGARANTIE FÜHREN!
Die Person, die die Montage vornimmt, hat sicherzustellen, dass alle Komponenten entsprechend den
hierin bereitgestellten Anweisungen korrekt montiert und installiert werden. Sollten Sie diese
Anweisungen nicht verstehen oder irgendwelche Fragen oder Zweifel diesbezüglich haben, kontaktieren
Sie bitte unseren Kundendienst.
Versuchen Sie nicht, die Wandhalterung zu installieren oder montieren, wenn sie beschädigt ist oder ein
Befestigungsteil fehlt. Bei Bedarf an Ersatz- oder Befestigungsteilen kontaktieren Sie bitte unseren
Kundendienst.Kunden im Ausland sollten sich bei Bedarf an Hilfestellung an den Händler wenden, bei
dem sie das Produkt erworben haben.
AVVERTENZA: LA MANCATA LETTURA, COMPRENSIONE COMPLETA, OSSERVANZA DI TUTTE LE
ISTRUZIONI PUÒ COMPORTARE GRAVI LESIONI PERSONALI, DANNI A COSE O INVALIDARE LA
GARANZIA DI FABBRICA.
È responsabilità dell’installatore assicurare che tutti i componenti siano assemblati e installati
correttamente, mediante l’utilizzo delle istruzioni a corredo. Nel caso in cui sorgessero incomprensioni in
merito alle presenti istruzioni oppure per domande o problemi, si prega di contattare il servizio clienti al.
Non tentare di installare o assemblare il prodotto se il prodotto stesso o i componenti risultano
danneggiati o mancanti. Nel caso in cui fosse necessario sostituire parti o componenti, si prega di
contattare il Servizio Clienti al
I Clienti internazionali che necessitano di assistenza possono rivolgersi al Rivenditore presso cui è stato
acquistato il prodotto.
OR
correct wrong
correct
Warning:
Please follow the correct instructions to position the monitors.
Wrong method will cause damage to the desktop and monitors.
5
C

TOOLS REQUIRED NOT INCLUDED
02
09
PRODUCT LINE GRAPH
Product A
Product B
?
OR
Max.792mm
410mm
Max.1584mm
+/-45°
+/-45°
+/-45°
90°
360°
85°
90°
85°
360°
90°
85°
360°
410mm
Max.1584mm
+/-45°
90°
360°
85°
90°
85°
360°
+/-45°
90°
85°
360°
3
Insert the screw through
the hole from extension
arm to the decorative cap. D
M6x25
4
B
S=3mm
S=5mm
S=3mm
S=5mm
S=5mm
E
S=3mm

03 08
CONTENTS
a
b
c
d
(x3)
(x4)
(x1)
Installing PRODUCT B
C
M4x30
13X5.5X16.5
A
M4x12
option
1
B
d
S=5mm
2
Remove the screw on middle
spring arm
OR
M4x12 (x12) M4x30 (x12)
M6x25 (x6)
13X5.5X16.5 (x12)
(x1)
S=3mm (x1)
S=5mm
A
B
C
D
E
F
(x6)
(x1)
(x1)
(x1)

04
07
Installing PRODUCT A
1
2
B
S=3mm
Warning:
Please make sure the desktop is strong enough to hold a maximum of
50 kgs.
8
C
B
S=5mm
7
NOTE:If space is still not
enough for clamp,remove
clamp screw and attachment
entirely and reattach clamp
screw with attachment
upside-down.
S=3mm
F

5
Insert the screw through
the hole from extension
arm to the decorative cap. D
M6x25
6
B
S=3mm
S=5mm
S=3mm
S=3mm
S=5mm
S=5mm
4
C
M4x30
13X5.5X16.5
A
M4x12
OR
3
c
D
M6x25
Insert the screw through
the hole from supporting
part to the decorative cap.
option
05 06