Thank you for choosing our Plasma/LCD TV Stand, this stand was designed to mount flat panel televisions to a floor stand. It
o
allows you to swivel your new television left and right 30 .
Safety Warning: If you do not understand these directions, or have any doubts about the safety of the installation, please call a
qualified contractor. Check carefully to make sure there are no missing or defective parts. Never use defective parts. Improper
installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this
manual. We can not be liable for damage or injury caused by incorrect mounting, incorrect assembly, or incorrect use.
Note: We makes every effort to assure all necessary television mounting hardware is included. If the hardware you need is not
included please consult your local hardware store.
Required Tools: Phillips screw driver.
Assembly Instructions for Plasma/LCD TV Stand
Supplied Parts
No. Picture Description Quantity
1 1
Base Glass
6
2 2
Middle Shelf Glass
31
Aluminum Support-418mm
With Cable Cover Slot
4B 1
Aluminum Support-243mm
With Cable Cover Slot
53
Aluminum Support-40mm
64
Plastic Cable Cover
4A 1
Aluminum Support-197mm
With Cable Cover Slot
