DUSKON LSPM7W01K User manual

Use and Care Guide
Landscape Light
Model # LSPM7W01K, LSPM14W02K
Safety Information
WARNING: Risk of Fire, Electric Shock,
or Injury to Persons. Turn the power off at
the circuit breaker or fuse and install in
accordance with local electrical codes.
WARNING:
material.
Installation
1PLACING THE LANDSCAPE LIGHT
□Thread the landscape light (A)
into the cover of your desired
installation location. Coat the
threads with sealing
compound (not included) and
tighten the nut on the
landscape light (A).
A2AIMING THE SPOT LIGHT
□Loosen the adjustment
screw (b) on the side of the
light. Aim the landscape
light (A) to your desired
angle by adjusting the light
up and down to desired
position, tighten the
adjustment screw (b).
A
3CONNECTING THE WIRES
□Wire the landscape light (A) to
the supply lines in the electrical
box. Connect white to white
(neutral), black to black (live),
and yellow green to yellow
green (ground).
□Secure all wiring connections
with wire nuts (not included).
A4COMPLETING THE INSTALLATION
□Close any unused holes with closure plugs (not included).
□Seal all openings to comply with a wet location installation.
□Use a caulking compound to provide a water tight seal
between the landscape light and the mounting surface.
Pre-Installation
TOOLS AND MATERIALS REQUIRED
(NOT INCLUDED)
Sealing Compound Wire Nuts
5-Year Limited Warranty
WHAT IS COVERED
This product is guaranteed to be free of factory defective parts and workmanship for a
period of 5 years from date of purchase. Purchase receipt is required for all warranty claims.
WHAT IS NOT COVERED
This guarantee does not include repair service, adjustment and calibration due to misuse,
abuse or negligence, or LEDs. Unauthorized service or modification of the product or of any
furnished component will void this warranty in its entirety. This warranty does not include
reimbursement for inconvenience, installation, setup time, loss of use, unauthorized service,
or return shipping charges. No service parts are available for this product.
Contact the Customer Service Team at 888-90-KBLED (888-905-2533)
A
b
Please read and understand these instructions before attempting to install
or use this light fixture.
1. This LED fixture is suitable for outdoor use and wet locations.
2. Do not disassemble this LED fixture. There are no user-serviceable
parts inside. The LED bulb is not replaceable.
3. This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and (
(2) This device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
www.duskonlighting.com
Please contact 1-888-905-2533 for further assistance.

Modelon.º LSPM7W01K, LSPM14W02K
Installation
A
A
A
b
Guía de uso y cuidado
Luz del paisaje
Información de seguridad
Lea y comprenda todas las instrucciones antes de intentar
instalar o usar esta lámpara.
1. Esta lámpara LED es apta para uso exterior y en
ubicaciones húmedas.
2. No desarme esta lámpara LED. No hay piezas que el
usuario pueda reparar dentro.
No se puede reemplazar la bombilla LED.
3. Este equipo cumple con la parte 15 de las reglas de la FCC.
El funcionamiento está sujetoa las siguientes dos
condiciones: (1) este dispositivo no puede causar
interferenciadañina, y (2) este dispositivo debe aceptar
toda interferencia recibida, incluso la que puede causar un
funcionamiento indeseado.
ADVERTENCIA: Riesgo de incendio,
descarga eléctrica o lesiones. Apague la
alimentación del disyuntor o fusible e instale
de acuerdo con las normas eléctricas locales.
ADVERTENCIA: No instalar cerca de
material inflamable.
Preinstalación
HERRAMIENTAS Y MATERIALES REQUERIDOS
(NO INCLUIDOS)
Sellador Tuerca para cables
Garantía Limitada Por 5 Años
QUÉESLOQUECUBRE
Este producto está garantizado contra piezas defectuosas de fábrica y mano de obra por un período
de 5 años a partir de la fecha de compra. El recibo decompra es necesario para todos los reclamos de
garantía.
QUÉESLOQUENOCUBRE
Esta garantía no incluye servicio de reparación, ajuste y calibración debido al mal uso, abuso o
negligencia, o los LED. El servicio no autorizado olamodicación del producto o de cualquier
componente proporcionado anularán esta garantía en su totalidad. Esta garantía no incluye
reembolsoporinconveniencias, instalación, tiempo de preparación, pérdida de uso, servicio no
autorizado o gastos de envío de devolución. No hay piezas derepuestodisponibles para este producto.
Comuníquese con el equipo de Atención al Cliente al 888-90-KBLED (888-905-2533)
1COLOCAR LA LUZ
INDIVIDUAL
□Atornille la luz individual (A)
en la cubierta de la ubicación
deinstalación deseada. Cubra los
pernos con sellador (noincluido)
y ajuste la tuerca en la luz
individual (A).
2DIRIGIR LA LUZ
INDIVIDUAL
□Dirija la luz individual (A)
hacia el ángulo deseado
moviendo la luz hacia arriba,
abajo, izquierda o derecha.
4COMPLETAR LA INSTALACIÓN
□Cierre los oricios sin usar con tapones de cerramiento
(noincluidos).
□Selle todas las aberturas para cumplir con instalaciones en
ubicaciones húmedas.
□Use un compuesto sellador para impermeabilizar entre laluz
individual y la supercie de montaje.
3CONECTAR LOS CABLES
□Conecte los cables de la luz
individual (A) a las líneas de
alimentación en la caja eléctrica.
Conecte blanco con blanco
(neutro), negro con negro (vivo) y
verde amarillo con verde amarillo
(tierra).
□Fije todas las conexiones de
cables con tuercas para cables
(noincluidas).
A
Nota: este equipo ha sido probado y se ha encontrado que cumple con los límites para un dispositivo digital de
clase B, de acuerdo con la parte 15 de las reglas de la FCC. Estos límites están diseñados para proporcionar una
protección razonable contra interferencias dañinas en una instalación residencial. Este equipo genera, utiliza y
puede irradiar energía de radiofrecuencia y, si no se instala y utiliza de acuerdo con las instrucciones, puede causar
interferencia perjudicial a las comunicaciones por radio. Sin embargo, no hay garantía de que no se produzcan
interferencias en una instalación en particular. Si este equipo causa interferencias dañinas a la recepción de radio o
televisión, lo cual puede determinarse apagando y encendiendo el equipo, se recomienda al usuario que intente
corregir la interferencia mediante una o más de las siguientes medidas:
— permite reorientar o reubicar la antena receptora.
— aumente la separación entre el equipo y el receptor.
— Conecte el equipo a una toma de corriente de un circuito diferente al que está conectado el receptor.
— Consulte al distribuidor o a un técnico experimentado en radio/TV para obtener ayuda.
PRECAUCIÓN: los cambios o modificaciones no aprobados expresamente por la parte responsable del
cumplimiento podrían anular la autoridad del usuario para operar el equipo.
www.duskonlighting.com
Póngase en contacto con el 1-888-905-2533 para asistencia adicional.
This manual suits for next models
1
Table of contents
Languages:
Popular Landscape Lighting manuals by other brands

Schrack Technik
Schrack Technik NEOS LED Medium Up/Down Series Assembly instructions

LIGMAN
LIGMAN JET 37 installation manual

Intermatic
Intermatic IR6-600WH installation instructions

exhart
exhart 19968-RS Assembly instructions

Wooshin Press
Wooshin Press WSSeagull user guide

Volt
Volt VHS-6720-X-BBZ installation instructions