Dustless Slurry Vacuum Series User manual

Part Number Qty. Description
11431 1 Cord
15531 4 Grommet
91443 1 Strain Relief
91553 2 10/16 x 3/4” Self Tapper
D1736 4 10/32 Bolt
N0107 4 10/32 Nut
N0109 4#10 Washer
N0050 16 1/4-20 Nylock Nut
N0052 8 1/4 Washer
H0084 or H0085 120V or 240V Motor Brush Set
H0234 2 Locator Pad Bumper
H0236 1 3/8-16 x 15” All Thread Rod
H0237 1 3/8-16 Rivet Nut
N0050 4 1/4-20 Nut
H0244 4 1/4-20 x 9” Rod
H0246 1 3/8-16 Wing Nut
H0263 1 Hex Nut
H0291 3 10/24 x 1/2” Screw
H0292 4 10/24 x 3/4” Screw
H0293 3 10/24 Nylock
H0297 4 5/16-18 x 1/2” Screw
H0952 1 Foam Float
H0953 1 Filter
H0955 1 Shroud
H0956 1 Lid
H0957 1 Cap
H0958 or H0940 1 120V or 240V Motor
H0960 2 Handle
H0961 1 Filter Mounting Cage
H0963 1 Filter Support
H0964 2 Locator Pads
H0108 1 Lid Seal
H0968 1 Switch
H0972 1 Motor Support Plate
H0974 1 Intake Port
OM037_1016
Parts List
H0292
N0052
H0968
N0050
H0244
N0050
H0972
H0084
or
H0085
H0964
N0107
N0109
D1736
H0974
H0956
H0108
H0263
H0952
H0291
H0293
H0961
H0957
N0050
H0955
91443
91553
15531
H0958
or
H0940
N0050
H0237
H0963
H0234
N0050
H0297
H0236
H0953
N0052
H0960
H0246
11431

OWNER’S MANUAL
dustlesstools.com
Write your serial number and circle your model
number below for your records. Serial numbers
are found next to the plug. You should record
both numbers in a safe place for future use.
Serial Number ___________________________
Model Numbers:
H0901 120v SlurryVacuum
H0902 240v SlurryVacuum
H0904 120v SlurryVacuum Kit
H0905 240v SlurryVacuum Kit
H0903 120v SlurryVacuum Topper
H0906 240v SlurryVacuum Topper
WARRANTY:
THREE-YEAR LIMITED WARRANTY – At
Dustless Technologies, we stand behind what we build.
We warranty this product, to the original retail purchaser,
against defects in materials or workmanship for a period of
(3) three years after date of purchase.
This limited warranty does not cover claims resulting from:
(I) misuse (II) neglect (III) modification (IV) failure to follow
instructions.
Warranty Card - Please, fill out your warranty card online
at dustlesstools.com. Please fill out your warranty card
within 90 days of purchase.
Warranty Claims - For warranty or returns with any of our
products, please contact your place of purchase. Technical
support is available at [phone] or send an email to
[e-mail].

IMPORTANT SAFETY INSTRUCTIONS
IMPORTANTES MESURES DE SECURITE IMPORTANTE PARA SU SEGURIDAD
Read the Owner’s Manual completely before attempting to operate this unit. Failure to follow the warnings and instructions may
result in burns, fire, electric shock, or personal injury:
Work Area Safety
• Do not operate vacuum in explosive atmospheres.
Sparks from static electricity or the motors may
ignite dust or fumes.
Electrical Safety
• Connect to a properly grounded outlet. See ground-
ing instructions.
• Always unplug unit when not in use and before
servicing.
• Electrical parts of this vacuum may only be worked
on by a skilled electrician and in accordance with
the electrical engineering regulations.
• Do not handle plug or operate vacuum with wet
hands.
Personal Safety
• Do not allow to be used as a toy. Close attention is
necessary when used by or near children.
• Do not change lters, clean the unit, or empty the
tank until the plug has been disconnected from the
electrical outlet.
• Use special care when emptying heavily loaded
canisters.
• Keep hair, loose clothing, ngers and all parts of
body away from openings and moving parts. There
is a risk of injury through getting stuck or being
drawn into moving machinery.
• Use extra care when working on stairs.
• Injury to the eyes and or body can occur if protec-
tive clothing and or equipment is not worn. Always
wear safety goggles, protective clothing, hearing
protection, and a dust mask. Exposure to high
noise levels can cause hearing loss or impairment.
Wear OSHA-approved hearing protection when
using this vacuum.
Tool Use and Care
• Always check the lter before each use. Do not use
without filter in place.
• Do not use with damaged cord or plug.
• Do not use if vacuum is not working as it should.
• Do not pull or carry by the cord, use cord as a
handle, close a door on cord, or pull cord around
sharp edges or corners. Do not run vacuum over
cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp
the plug, not the cord
• Turn off all controls before unplugging.
• Changes, add-ons, or conversions of the vacuum
which might have an influence to the safety of
the vacuum must not be undertaken without the
permission of the manufacturer. This applies in
particular to the fitting and adjustment of safety
devices and to welding on major and load bearing
parts.
• Spare parts must always comply with the technical
requirements and the specifications of the manu-
facturer. This is always guaranteed with original
spare parts from the manufacturer.
• In the event of operational malfunctions the
vacuum must be shut down immediately. The
malfunction must be rectified before starting the
vacuum again!
Service
• Adjustments, servicing, and inspection work and
inspection intervals specified in these Operating
Instructions, as well as any information on the re-
placement on parts and systems of the vacuum must
be undertaken and complied with.
• These activities can only be undertaken by quali-
fied personnel.
• Make sure that electrical components used for re-
placement purpose comply with the original parts
and are correctly adjusted if necessary.
• Before performing any maintenance, place the
vacuum in the safety off position which is the
position of the vacuum when it cannot generate
any hazard.
Specific safety rules
• This vacuum is for WET RECOVERY only.
• Do not use to pick up ammable or combustible
liquids, such as gasoline.
• Do not pick up any objects that are burning or
smoking, such as cigarettes, matches or hot ashes.
• Please handle in accordance with the regulation of
how to dispose of the liquid so that you meet the
requirements of local regulations
• WARNING - to reduce the risk of shock - Do not
use on wet surfaces. Do not expose to rain. Store
indoors.
SAVE THESE INSTRUCTIONS CONSERVER CES INSTRUCTIONS GUARDAR ESTA INSTRUCTIONES
NOTE: The reading and understanding of the Owner’s Manual is imperative prior to operating this machine. If you or your operator(s) cannot
read English, have this manual explained fully before attempting to operate this machine. Si Ud. o sus operadores no pueden leer el inglés, el
contenido completo de este manual será explicado antes de intentar operacion de esta máquina.
Grounding Instructions:
This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to
reduce the risk of electric shock. This appliance is equipped with a cord having an equipment - grounding conductor and grounding plug. The plug
must be inserted into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
WARNING - Improper connection of the conductor can result in a risk of electric shock. Check with a qualified electrician or service
person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the appliance
When using the appliance at a distance where an extension cord becomes necessary, a 3-conductor grounding
cord of adequate size must be used for safety, and to prevent loss of power and overheating. Use the table to
the left to determine A.W.G. wire size required. To determine ampere rating of your vacuum, refer to nameplate
located on rear of motor cover. Before using appliance, inspect power cord for loose or exposed wires and
damaged insulation. Make any needed repairs or replacements before using your appliance. Use only three-wire
outdoor extension cords which have three-prong grounding-type plugs and three-pole receptacles which accept
the extension cords plug. When vacuuming liquids, be sure the extension cord connection does not come in
contact with the liquid.
NOTE: STATIC SHOCKS ARE COMMON IN DRY AREAS OR WHEN THE RELATIVE HUMIDITY OF THE AIR IS LOW.
THIS IS ONLY TEMPORARY AND DOES NOT AFFECT THE USE OF THE APPLIANCE, TO REDUCE THE FREQUENCY
OF STATIC SHOCKS IN YOUR HOME; THE BEST REMEDY IS TO ADD MOISTURE TO THE AIR WITH CONSOLE OR
INSTALLED HUMIDIFIER.
Extension Cords
Volts Total Length of cord in feet
120V 25 50 100 150
Ampere Rating
AWG
More
Than
Not More
Than
0 - 6 18 16 16 14
6 - 10 18 16 14 12
10 - 12 16 16 14 12
12 - 16 14 12 Not Recommended

Setup
1. Unpack and Check Box Contents:
Remove entire contents of box. Check each item against the Parts List. (pg. 4)
Notify Dustless Technologies®immediately if any parts are damaged or missing.
2. Install Rod and Float:
Place upside down on a flat surface.
3. Wrap Filter around Filter Cage.
4. Place the Filter Cage, Filter and Wing Nut over the Float.
How to Use
Operation:
Place vacuum on drum. Push hose onto the
intake port. Plug in vacuum.
The on/off switch is located on the shroud
below the cap.
Do not operate vacuum without float or
filter in place
When the drum is full of liquid, the
automatic shut-off mechanism will shut
off air flow. When this happens, the motor
sound will become
noticeably higher in pitch. Turn cleaner off
and empty or replace drum to continue
use.
Storage:
Disconnect from electrical outlet. Remove
from drum. Store in a dry location indoors.
Wrap the cord carefully around the
vacuum to avoid
accidental damage.
Tighten with wrench Thick foam down
Thick foam down
Tighten Wing Nut