Dynalink A3502 User manual

USER MANUAL
A3502 - COMPOSITE / S-VIDEO PLUS
STEREO AUDIO TO HDMI CONVERTER
Table of Contents
1.0 Introduction.........................................................................2
2.0 Panel Descriptions...............................................................2
3.0 Connection and operation....................................................3
4.0 Specifications.......................................................................3
Distributed by Altronic Distributors Pty Ltd
www.altronics.com.au

A3502 - Composite / S-Video Plus StereoAudio to HDMI Converter
2
Thank you for purchasing this product. For optimum performance and safety, please read these
instructions carefully before connecting, operating or adjusting this product. Please keep this manual
for future reference.
1.0 INTRODUCTION
This device is designed to convert CVBS or S-Video + R/L Stereo signals to HDMI. It is a unique
device that upscales an analogue standard definition image and stereo audio into High Definition
digital signal to suit virtually any HDTV and sound system. The A3502 offers solutions for the home
digital entertainment centre, HDTV displays at retail sites, conference room presentations, school and
corporate training environments, and video monitoring for security purposes.
1.1 FEATURES
Video signal can be up to HDTV 720p
Automatically check (AUDIO delay)
Ensure the synchronization of AUDIO and VIDEO
HDMI output: 720p@50Hz; 720p@60Hz
Combine HDMI withAUDIO
Video output system: NTSC 3.58 / PAL(automatic)
Compliant DVI by using HDMI-DVI adapter
1.2 PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make sure the following items are
contained in the shipping carton:
Main unit
5Vd.c power supply
User's manual
2.0 PANEL DESCRIPTIONS
FRONT PANEL –SELECT button to choose between CVBS and S-Video inputs, indicated by LEDs.
Power Video S-Video
DC/5V Video
Output
Select
RLF
S-Video
REAR PANEL –showing inputs and HDMI outputs, power switch.

A3502 - Composite / S-Video Plus StereoAudio to HDMI Converter
3
3.0 CONNECTION AND OPERATION
1. Connect all input and output devices to this converter. Cables not included.
2. Connect the 5V power supply to the converter and then plug it into the mains socket.
3. Press “SELECT”to select CVBS or S-VIDEO for the output.
3.1 CONNECTION DIAGRAM
4.0 SPECIFICATIONS
Signal Inputs/Output
Input Video Signal
1.2 volts p-p
Input DDC Signal
5 volts p-p (TTL)
Output Video
HDMI
Video format supported
DTV/HDTV
HDMI 720p@60Hz
Connector
HDMI
Type A (19 pin) female
S-VIDEO
A/V
CVBS
Operating Frequency
Vertical Frequency Range
50/60Hz
Video Amplifier Bandwidth
1.65Gbps/165MHz
Mechanical
Size(L-W-H)
155×70×23mm
Weight for shipping
255g
Environmental
Operating Temperature
0℃to + 70℃
Operating Humidity
10% to 85% RH (no condensation)
Storage Temperature
-10℃to + 80℃
Storage Humidity
5% to 90% RH (no condensation)
Power Requirement
External Power Supply
5V d.c. @ 2A
Power Consumption
5 watts (max)
Regulatory Approvals
Converter Unit
FCC,CE,UL
Power Supply
UL,CE,FCC
Note: Specifications are subject to change without notice.
REV 13/3/13