Dynex DX-19E220A12 User manual

WE ARE GOING GREEN!
A copy of your User Guide is not provided
in the box but is available online.
Go to www.dynexproducts.com, click
Support & Service. Enter your model number
in the Search eld, then press Enter.
Click Support/Downloads.
Connecting a DVD or Blu-ray DVD player,
cable box, satellite receiver, or game station
Using HDMI (best)
Using component cables (better)
Using composite cables (good)
Connecting an antenna/cable wall jack
Connecting a Home Theater System
Using Analog audio
Front features
Installing the stand
1Carefully place your TV screen face-down on a cushioned, clean surface to
protect the screen from damages and scratches.
2 Attach the stand column to the back of the TV, and then secure the stand
column to the TV with three of the provided screws.
3Align the stand base to the stand column, then secure the stand base to the
stand column with the remaining provided screw.
Installing a wall-mount bracket
If you are mounting and plan on using the back inputs, a low prole wall mount
may not work with your TV.
1 Carefully place your TV screen face-down on a cushioned, clean surface to
protect the screen from damages and scratches.
2 Remove the three screws holding the TV to its stand column.
3 Remove the stand column.
4 Attach the wall-mount bracket to your TV using the mounting holes on the back
of your TV. See the instructions that came with the wall-mount bracket for
information about how to correctly hang your TV.
Antenna or
cable TV
(no box)
Blu-ray player/DVD player/VCR Cable or satelliteTV box
AV receiver
Game console
or camera
Computer
Connecting a home theater system with multiple devices
We recommend that you connect
the AV receiver’s HDMI OUT jack
to your TV’s HDMI IN jack.
This apparatus is intended to
be supported by a UL Listed
wall mount bracket.
Warning
Composite video
and analog audio
Connection type Video quality Cable connector
HDMI video/audio Best
Component video
and analog audio
Better
Good
OR
OR
Remote control
and
2 AAA batteries
Composite
cable
Stand base
19" LED-LCD TV
QUICK SETUP GUIDE
DX-19E220A12
USB
VGAAUDIO
HDMI
ANT/CABLE IN
AUDIO
LR
AUDIO OUTPC IN
AUDIO IN
You can use an HDMI jack to connect a DVI device to your TV. You need to attach an
HDMI-to-DVI adapter to the end of the HDMI cable that connects to the DVI device’s jack.
Audio cable
(optional)
Identifying cables
Your TV has several connection types for connecting devices. For the best video quality, connect
a device to the best available connection.
INFO
MENU
MUTE
GUIDE
RECALL
EXIT
INPUT POWER
VOL CH
ZOOM
COMP
HDMI
SLEEP
MTS/SAP
AUDIO
TV
CH-LIST
VGA
FAVORITE
1
7
4
2
8
5
0
3
9
6
VIDEO
PICTURE
CCD
Stand column Screws (4)
MENU
INPUT
VOL
CH
Remote
control sensor
Power
indicator
Volume
+/-
Menu
Channel
▼/▲
Power
button
Input
Locating grooves
Stand column
USB
VGAAUDIO
HDMI
ANT/CABLE IN
AUDIO
LR
AUDIO OUTPC IN
COMPONENT
OUT
AUDIO
LRVIDEO
AV IN
COMPONENT IN YP
BPR
AUDIO/VIDEO
OUT
AUDIO
LRVIDEO
AV IN
COMPONENT IN YP
BPR
OUT
IN
ANTENNA

WE ARE GOING GREEN!
A copy of your User Guide is not
provided in the box but is available
online.
Go to www.dynexproducts.com,
click Support & Service. Enter your
model number in the Search eld,
then press Enter.
Click Support/Downloads.
One-year limited warranty
Visit www.dynexproducts.com for details.
Need additional help?
See your User Guide! This comprehensive guide
includes everything from basic how-to steps to
more advanced features. Go to
www.dynexproducts.com, click Support &
Service. Enter your model number in the Search
eld, then press Enter. Click Support/Downloads.
We’re here for you
www.dynexproducts.com
For customer service, call:
800-305-2204 (U.S./Canada markets)
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richeld, MN USA 55423-3645
© 2011 BBY Solutions, Inc., All Rights Reserved.
DYNEX is a trademark of BBY Solutions, Inc. Registered in some
countries. All other products and brand names are trademarks of
their respective owners.
ENGLISH 11-0394
INFO
MENU
MUTE
GUIDE
RECALL
EXIT
INPUT POWER
VOL CH
ZOOM
COMP
HDMI
SLEEP
MTS/SAP
AUDIO
TV
CH-LIST
VGA
FAVORITE
1
7
4
2
8
5
0
3
9
6
VIDEO
PICTURE
CCD
Turning on your TV for the rst time
1Connect the power cord to a power outlet, then press (power). The Choose Your Menu
Language screen opens.
2Press ▲or ▼to highlight a language, then press ENTER. The Choose Your Time Setting screen
opens with Mode highlighted.
3Press ◄or ►to select Auto or Manual. If you select Auto, the date and time are set
automatically from a digital TV signal. If you select Manual, you can manually set the date and
time. Press ENTER. The Choose Your Picture Mode screen opens.
4Press ▲or ▼to highlight Home Mode or Retail Mode, then press ENTER. If you select Retail
Mode, a message asks you to conrm your selection. Select Yes or No. Retail Mode is not an
energy-saving mode. The Choose Your TV Source screen opens.
5Press ▲or ▼to highlight Antenna, Cable, or Cable/Satellite box. If you select Antenna or
Cable, your TV scans for available channels. The scan may take several minutes. If you select
Cable/Satellite box, your TV does not scan for channels.
6To watch TV, press INPUT, then press ▲or ▼to select the video input source for your TV signal.
For example, select HDMI if your TV is connected to a cable/satellite box using an HDMI cable or
select TV if your TV is connected to an antenna or cable/satellite using a coaxial cable.
Setting up and using your remote control
1Press the release button on the back of the remote to remove the battery compartment cover.
2Insert two AAA batteries into the battery compartment. Make sure that the + and – symbols on
the batteries match the + and – symbols in the battery compartment.
3Replace the cover.
Connecting power
Plug the AC power cord into a power outlet.
Programming your remote control
To program your universal remote control to work with your new Dynex TV, see the table for common codes. If you have problems programming your remote or need a dierent remote control code, visit http://www.dynexproducts.com/remotecodes
for the latest remote control code information.
19" LEDLCD TV I QUICK SETUP GUIDE I DX19E220A12
Normal:
Displays the original 4:3 aspect ratio with black bars vertical on the left and
right hand side of the screen. If the original aspect ratio is 16:9, then the
image displays in 16:9.
Zoom:
Expands the image to ll the screen. The top and bottom of the image may
be cropped.
Wide:
Use this option to view content recorded in a 16:9 (wide-screen) aspect
ratio.
Cinema:
Stretches the image at the edges, but keeps a clear image in the center.
Auto:
Automatically adjusts the image based on the screen size and the TV
program. Note: Auto is only available when Auto Zoom in the Channels
menu is set to On.
Aspect ratio options
CCD
Turns closed captioning on or o.
MTS/SAP
Cycles through mono, stereo, and
secondary audio for analog programs.
SLEEP
Sets the sleep timer.
ZOOM
Changes how the picture displays
on the screen.
Channel
Changes the TV channels.
EXIT
Closes the on-screen menu.
INFO
Opens a TV status banner.
RECALL
Returns to the previous channel.
Input
Opens the Input Source list.
GUIDE
Displays the program guide.
MUTE
Mutes the sound.
PICTURE
Selects the picture modes.
Quick Launch Inputs
Selects another source
connected to your TV.
CH-LIST
Opens the channel list.
Power
Turns your TV on or o.
ENTER
Conrms selections or changes.
MENU
Opens the on-screen menu.
Volume
Changes the volume.
Arrows
Navigates in on-screen menus.
.
Enter a digital sub-channel number.
(Example: 4.1)
Numbers
Enter channel numbers.
FAVORITE
Opens the Favorite Channel List.
AUDIO
Selects the audio modes.
Setup Wizard
Select
Move EXIT Exit
Next
English
Fran aisç
Español
Choose Your Menu Language
MENU Back
Set menu language to English, Fran ais, or Español.ç
Setup Wizard
Next
Choose Your Time Setting
DST Off
Auto
Time Zone Pacific
Year
Month 2011
July
Day
Time 15
09 : 05 AM
Select
Move EXIT Exit
MENU Back
If Automatic, options are automatically set by TV source.
Mode
Setup Wizard
Next
Home Mode
Retail Mode
Choose Your Picture Mode
Select
Move EXIT Exit
MENU Back
Reduces total power consumption.
Setup Wizard
Choose Your TV Source
Analog Channels
Digital Channels
0
0
Antenna
Cable
Cable/Satellite Box
RF CH : 0
Scan for channels
Select
Move EXIT Exit
MENU Back
Select Antenna if using an antenna for standard or HD TV.
TV
Component
VGA
INPUT SOURCE
AV
HDMI
Time
Closed Caption
Menu Settings
Computer Settings
Parental Controls
Picture Audio Settings Channels
Input Label
System Info
Restore Default
Select
Move EXIT Exit
MENU Back
Set various TV options
Verizon
0198, 0490
Universal remote controls Cable/Satellite/Set-top box
Universal remote TV codes
TiVo
0091
Time WarnerDish Network
720
Cox
1326,
1463
DirectTV
10171, 11204, 11326,
11517, 11564, 11641,
11963, 12002
ComcastCharterCablevision
068, 069, 078, 096,
100, 164, 168, 229, 026
Sony
068, 069, 078, 096,
100, 164, 168, 229,
026
One for All
0054
RCA
135
Philips
0198, 0490 400, 450, 461,
456, 10463,
1463, 0463
10171, 11204, 11326,
11463, 11517, 11641,
11780, 11785, 11892,
11963, 12002
2002, 1204, 1423, 1517, 0171,
1963, 0463, 1463, 0842, 1326,
167, 415, 424, 450, 456, 461,
507, 523, 567, 577, 586
Power outlet
Back of TV
Power cord