Dyson Lightcycle Morph User manual

User manual
CD06 JN.00000 PN.000000-00-00 00.00.00 VERSION NO.01
2 Warranty information
3 Assembling your light
3 Positioning your light
4 Color temperature and brightness
4 Settings
5 Disabling/Enabling Bluetooth®wireless technology
5 USB-C charging point

Take full control with the Dyson Link app.
Get step-by-step set up and support.
Control how and when your Dyson Light
operates.
Download the Dyson Link app
Download the Dyson Link app from the App store
or Google Play.
Open the app and follow the on-screen instructions
to create a new account.
For further information and support:
www.dyson.com
866-693-9766
Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S.
and other countries. App Store is a service mark of Apple Inc., registered in the
U.S. and other countries.
Google Play and the Google Play logo are trademarks of Google Inc.
The Bluetooth® word mark and logos are registered trade marks owned by
the Bluetooth SIG, Inc. and any use of such marks by Dyson is under license.
Thank you for choosing
to buy a Dyson Light
Your machine warranty
We don’t stop caring about our
machines once they’re yours.
Even after your warranty has ended,
we’ll still be on hand to help.
Your serial number can be found
on the rating plate located on the
bottom of your light.
Note your serial number for future
reference.
This illustration is for example purposes only.
2

3
Assembling your light
Positioning your light
Don’t remove the protective
wrapping from the horizontal
arm before your light has
been assembled.
Place the base on the floor
and insert the vertical stem
into the base.
Insert the screw into the
vertical stem and tighten fully,
with the tool supplied.
Insert the power cable into the
base, making sure it sits in the
cable guide.
Remove any protective
wrapping from your light.
Plug in and switch on.
Download the Dyson link app
and add your light.
You can easily change the position of your light by independently
rotating the optical head, arm and stem up to 360°.
Power Brightness
Settings
Color
temperature

4
Swipe to change the color
temperature of the light
from warm through to cool.
The light will adjust to
background light conditions and
keep the workspace at a constant
brightness.
Automatically changes the
brightness and color, according
to your geographical location,
throughout the day when
connected by Bluetooth®
wireless technology to the
Dyson Link app.
Color temperature
and brightness
Settings
Swipe to change the
brightness of the light.
Tap to change quickly
between brightness levels.
For more information about using
your light without connecting to the
Dyson Link app: www.dyson.com/support
To find out more about color temperature
and brightness levels, and to get the best
from your light, go to the Dyson Link app
or online at: www.dyson.com/support
The light will turn off after five
minutes if no movement is detected.
Tap to change quickly between
color temperatures.

5
Disabling/Enabling Bluetooth®
wireless technology
USB-C charging point
Your light has Bluetooth® wireless
technology enabled by default.
Press and hold the middle button until
the LED lights on the three buttons blink.
The main light source will turn off and
then on again to show that Bluetooth
has been disabled.
To re-enable Bluetooth, repeat the
instructions above. The main light
will blink twice to show that Bluetooth
has been re-enabled.
Plug in your mobile devices
to charge up to 1.5A at 5V.