NEBO NEB-LSP-0020 User manual

FITS
4”x 4” or
6”x 6” POST
USE AND CARE GUIDE
POST CAP LIGHT
MODEL # NEB-LSP-0020
ALight Body (1)
BScrews (2)
1. Preparation
• Before beginning assembly, compare parts with package
contents list to make sure all are present. If any part is
missing or damaged, do not attempt to assemble the
product.
• Required tools: Phillips Head screw driver
2. Installation
• Determine if your fence or deck posts measure 4”x 4” or
6” x 6”. If they are 6” x 6” you will need to remove the post
adaptor bracket.
• Pull the tab out (1) to activate the battery and attach the cap
light unit over the post. Screw in the mounting screws (B)
through side holes in the light body (A).
A
ASSEMBLY AND INSTALLATION
IMPORTANT:
• Do not submerge the fixture in water.
• Do not install the fixture within 10 ft. of water.
• Ensure unit is exposed to full sunlight, so it can charge during daylight hours.
1
SOLAR PANEL

TROUBLESHOOTING
Problem Possible Cause Solution
The fixture will not light. Pull tab not removed. Remove pull tab.
PRODUCT GUARANTEE
For more information, detailed video
instructions, and warranty registration,
visit NEBOLIGHTS.com
If you experience a problem, please do not return to your local store. Contact our Customer Service team at 800-255-6061
CARE AND CLEANING
Do not use any cleaners with chemicals,
solvents or harsh abrasives.
Clean the fixture with a soft damp cloth.