E-Blue Gaming EGT576-S User manual

2
EGT576-S
STEP 1: Insert the foot caps into the foot of the desk leg and install
“foot adjustment screws”
STEP 2: Align the lower leg metal base secure it using screws and
tighten it from the buttom.
STEP 3: Connect the upper leg metal base into the lower leg metal
base and adjust according to the desired height.
STEP 4: Securely tighten the desk leg using a plastic head star screw.
Align the leg brace and use screws to tighten it.

3 4
STEP 6: Align it into the front leg brace and screw to tighten.
STEP 7: Assemble the back desk board frame.
STEP 8: Align it at the back leg base and screw to tighten.
STEP 7: Assemble the back desk board frame.

5 6
EGT576-S
STEP 9: Assemble the desk board.
STEP 10: Align the LED lighting into the side of the desk board.
STEP 11: Screw both ends to tighten.
STEP 12: Align the desk board into the deskboard frame and screw
it from the buttom to tighten.
STEP 13: Insert cable hole covers.

STEP 14: Place the mouse pad into the top of desk board.
STEP 15: Install the RGB LED control box, screw and tighten it.
STEP 16: Connect all the RGB LED cables into the RGB control box.
Connect the RGB control box usb connector into a desktop
computer.
7