E-Blue Gaming T574 User manual

E-Blue Gaming L.L.C.
Website: http://www.ebluegaming.com
Telephone: [phone]
Address: 694 S. Copper Road, #A1, Gilbert, AZ. USA 85233
The content on this manual is subject to change without prior notice. For the latest news, please visit our website.
The copyright belongs to E-Blue Gaming L.L.C. and may not be used without permission.

Mouse pad
Insert the “Foot Cap” into the foot of the desk leg, and screw
the “Height Adjustment foot” at the buttom of the desk.
Connect one “metal brace” into the “Desk legs” and hit it downwards using
a “Rubber mallet” to securely tighen it.
Connect two “metal braces” into the “Board frame metal” and hit
it dowwards using a “Rubber mallet” to securely tighten it.
Align the “Desk board” into the “Board metal frame” and insert all four “35mm” screws.
Install the “cable management fibre” Insert “12mm” bolt screws and tighten it.
Rubber Mallet
4Pcs Adjustment Screws
4Pcs Foot Caps
Cable Management Fibre
Desk Legs
Desk Board Metal Frame
3Pcs Metal Braces
Connect the “Board Metal Frame” into the “Desk Legs” and adjust
according to the desired height. Use two “Start head screws” to
secure each sides.
Place the “Mouse pad” on top of the “Desk Board”.
Insert all four “Foot Adjustment Screws” into the buttom of the
“wooden piece” and place it beside the “Desk Legs”.
Note: Use the 3M wireclips below the
desk board for cable management.
After assembling the gaming desk, connect the USB lighting cables into
the “USB Splitter”. Connect the “USB Splitter” to a desktop computer.
Wooden Piece
3M Wireclips
4Pcs Adjustment screws
4Pcs M6x12mm screws
4Pcs M6x35mm screws
4Pcs Star screws
Desk board
Allen Key
USB Splitter
Contents of the packages