How to use the Bluetooth shutter
Other functions
*
The cage has two 1/4"-20 threaded holes, where you can attach
accessories on it, such as a microphone or LED light.
It can also be attached onto a tripod or slider with the bottom 1/4"-20
thread hole.
Please press and hold the button until the blue light is flashing. Open the Bluetooth
on your phone, search for the shutter, and then connect. Now, you can just press the
shutter to take pictures or videos.
Also, the Bluetooth shutter can be taken out of the holder and you can remotely control
your phone.
1
5
Installation
Attach the lens on the cage until it is fully secured.
Push this part up to clamp your cell phone. Align the phone's lens and the cage's lens.
Use this screw to fine-tune the location of the phone from left to right.
Loosen the screw and pull the lens adapter up and down until it fits the lens of the cell phone and tighten it.
Insert the Bluetooth shutter onto the cage.
Finish
Press here
1
4
3
2
1
2
3
4
5
Attach the belt
For shoulder belt.
For handle belt (optional).
1
1.
2.
2
12
Magic Phone Cage User Manual