e-Line Technology Eyeball User manual

Network Camera setup and installation guide. Browser setup with settings explained.
Product Made in China under ISO9001 & ISO1400 standards
Manual Printed in China v1.0
NETWORK CAMERA GUIDE
Install
Browse
Use
01.BSM.12.0092401
eLineTechnology

Eyeball Vandal Dome IP Camera
Instruction
Manual
English Version 1.0
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT
REMOVE COVER. NO USER SERVICABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of un-insulated "dangerous voltage" within the
product’s enclosure that
may be of sufficient magnitude to
constitute arisk of electric shock.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature
accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE
OF THE PLUG TO THE WIDE SLOT AND FULLY INSERT.
eLineTechnology

Important Safeguards
In addition to the careful attention devoted to quality standards in the manufacturing process of
your
video product, safety is amajor factor in the design of every instrument. However, safety is
your responsibility too. This sheet lists important information that will help to assure your
enjoyment and proper use of the
video product and accessory equipment. Please read them
carefully before operating and using your
video product.
Ins t allation
1. Read and Follow Instructions - All the safety and
operating instructions should be
r ead befo r e the
video product is operated. F o ll o w all op er ating
ins
tr uctions.
2.
Retain Instructions - The safety and operating
instructions should be retained for future
r e f e r ence.
3.
Heed Warnings - Comply with all warnings on the
video product and in the operating ins tru ctions .
4.
Polarization - Do not defeat the
safety purpose of the polarized
or
grounding-type plug.
Apolarized plug has two blades
with one wider than the
o t h e r.
Agrounding type plug has two
blades
and athird grounding prong.
The wide blade or the third prong
are provided for
you r safety.
If the provided plug does not fit into
you r outlet,
consult an electrician for replacement of the
obsolete outlet.
5.
Power So u r c e s - This video product should be
ope r at ed only from the type of po w e r sour ce
indicated on the marking label. If you are not sure of
the type of power supply to your
l oc a tion, co nsult
your video dealer or l oc a l power company. For video
products intended to operate from batterypower,
or
other sources, refer to the operating ins tru ctions .
6.
Overloading - Do not overload wall outlets o f
extension cords as this can result in the risk of fire
or electric shock. Overloaded AC outlets, extension
cords,
f r ay ed po w e r cords, damaged or c r a c k ed w i re
insulation, and broken plugs are dange r ous. They
may
result in a shock or fire hazard. P e r i od i c a ll y
examine the co r d , and if its appearance indic a t es
damage or deteriorated insulation, have it r e plac ed
by your service t e chnician.
7.
Power Cord Protection - Power supply cords should
be routed so that they are not
lik e l y to be walked on
or pinched by items placed upon or against them,
paying particular attention to cords at plugs,
convenience r ecep t ac l es, and the point where they
exit from the
video pr oduct.
8. Ventilation - Slots and openings in the case ar e
provided for ventilation to ensure reliable oper a t ion
of the
video product and to protect it fr om
overheating.
These openings must not be blocked or
covered. The openings should never be blocked by
placing the
video equipment on abed, sofa, rug, or
other similar surface. This video product should
ne v e r be placed near or over aradiator or heat
register.
This video product should not be placed in a
built-in installation such as a
bookcase or r a ck
un
l ess proper ventilation is provided or the video
product manufacturer’s instructions
have been
fo
ll o w ed.
9. Attachments - Do not use attachments unl ess
r eco mm ended by the video product manufacturer as
they may
cause a h aza r d.
10.
Camera Extension Cables – Check the rating of
your extension
cable(s) to verify compliance with
your
l oc a l authority regulations prior to in s t all a tion .
11. Water
and Moisture - Do not use this video pr oduct
near water. For example, near abath tub, wash
bowl, kitchen sink or laundry tub, in a w
e t
basement, near aswimming pool and the lik e.
Caution: Maintain electrical safety.
Po we rline
ope r ated equipment or accessories connected to
this unit should bear the UL listing mark of CSA
certification mark on the
accessory itself and shou ld
not be modified so as to defeat the safety fea tures.
This
will help avoid any potential hazard from
electrical shock or fire. If in doubt, contact qualified
service personnel.
12.
A ccess o r ie s - Do not place th is
video equipment on an unstabl e
cart, stand, tripod, or table. The
video equipment may fall, causing
serious
damage to the video
product. Use this
video pr oduct
only with a cart, stand,
t r ipod,
bracket, or table r eco mm ended by t h e
manufacturer or sold with the video product. Any
mounting of the product should
f o ll o wthe
manufacturer’s instructions and use amounting
accessory r eco mmended by the manufactur er .
Precautions
Service
13. Servicing - Do not attempt to service this video
equipment yourself as opening
or r e m oving co v e r s
may expose you to dangerous voltage or other
hazards.
Refe r all servicing to qualified service
pe r sonne l.
14.
Conditions Requiring Service - Unplug this video
product from the
wa ll outlet and refer servicing to
qu a l ified service personnel under the f o ll owing
cond itions:
• When the power supply cord or plug is damaged.
• If liquid has been spilled or objects have f a ll en int o
the video pr oduct.
• If the video product has been exposed to rain or
water .
• If the video product does not operate normally by
f o ll owin g the operating instructions. Adjust only
those controls that are covered by the operatin
g
instructions. Improper adjustment of other co ntr ols
may
result in damage and will often r e quir e
extensive
work by a q u a l ified technician to r es t or e
the video product to its normal operation .
• If the video product has been dropped or the cabinet
has been damaged.
• When the video product exhibits a distinct change
in performance. This indicates aneed
for service.
15.
Replacement Parts - When replacement parts ar e
required, have the service technician verify that the
replacements used
have the same safety
characteristics as the original parts. Use of
replacements specified by the
video pr oduct
manufacturer can prevent fire,
e l ec tric shock o r
other hazards.
16.
Safety Check - Upon completion of any service or
repairs to this video product, ask the service
technician to perform safety checks
r eco mme nded
by the manufacturer to determine that the video
product is in safe operating
co ndition.
17. Wall or
Ceiling Mounting - The cameras provided
should be mounted to a w
a ll or ceiling o n l y as
instructed in this guide, using the provided
mounting
br acke ts.
18. Heat
- The product should be situated away fr om
heat sources such as radiators, heat
r e gis ter s,
stoves,
or other products (including amplifiers) that
p r oduce heat.
Use
19. Cleaning - Unplug the video product from the wall
outlet be f o r e cleaning. Do not use l i quid c l e a ne r s or
ae r oso l cleaners. Use adamp cloth for c l e a ning.
20.
Product and Cart Combination - Video and c a rt
combination should be moved with c a r e. Quick
stops,
excessive force, and uneven surfaces may
cause the
video product and cart combination t o
o
v e rturn.
21.
Object and Liquid Entry - Never push objects of any
kind into this
video product through openings as
they may touch dangerous voltage points
or
“short-out”
parts that could result in a fire or
e l ec tric shock. Never spill liquid of any kind on the
video p r oduc t.
22.
Lightning - For added protection for this video
product during alightning storm, or when it is
l e ft
unattended and unused for l ong periods of time,
unplug it
from the wall outlet and disconnect the
antenna
or c a b l e system. This will p r e v e n t damage
to the
video product due to lightning and power line
su
r ges.
eLineTechnology

General Precautions
1. All warnings and instructions in this manual should be f o ll owed.
2.
Remove the plug from the outlet before cleaning. Do not use liquid aerosol detergents. Use a
water
dampened cloth for cleaning.
3.
Keep enough space around the unit for ventilation. Slots and openings in the s t o r age cabinet
should not be blocked.
4. During lightning storms, or when the unit is not used for a
l ong time, disconnect the po wer
supply, antenna, and cables to protect the unit from electrical
sur ge.
FCC CLASS A NOTICE
NOTE
This equipment has been tested and found to comply with the limits for aClass Adigital device pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
ha rmful
interference when the equipment is operated in a commercial environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the manu
facturer’ s
instruction manual, may cause harmful interference with radio communications. Operation of this eq uipment
in aresidentia
l a r ea is likely to cause harmful interference, in which case you will be required to correct th e
interference at your own expense.
This equipment has been certified and found to comply with the limits regulated by FCC, EMC, and
LVD. Therefore, it is designated to provide reasonable protection against interference and will not
cause interference with other appliance usage.
However, it is imperative that the user follows the guidelines in this manual to avoid improper
usage which may result in damage to the unit, electrical shock and fire hazard injury.
In order to improve the feature functions
and quality of this product, the specifications are subje ct
to change without notice from time to time.
Features
• HD CMOS Progressive Scan
• 720p or 1080p models with real-time (25/30 fps)
• Triple-streaming (H.264/MJPEG)
• Future proof ONVIF 2.1 compliance (1.02 backwards c o mpatibl e)
• Compatible with popular third party VMS softwar e*
• Power-over-Ethernet (PoE) operation, 14Watt max/12V operation
• Backup options: micro SD c a r d ,FTP, NAS, l o c a l
• Mobile Apps: iPhone®, iPad®, Android™
• Supports two-way audio
• Simple ins t a llation and adjustment
• 2.8-12mm vari-focal l e ns
• 30 ft. (9m) IR Night Vision, T r ue Day/Night (TDN)
• IP66 Weatherproof and IK5 Vandal Resistant
• Multi-browser support: IE, Firefox, Safari, Chrome
• 3-axis gimbal for versatile mounting
* Check Onvif compliance on for your software.
eLineTechnology

TABLE OF CONTENTS
1. Getting Started................................ . 1
1.1 Default Camera Username, Password, and Ports .......... . 1
1.2 Camera Interior Overview ..............................
. 2
1.2.1 Functions of Status LED’s ................................................ 2
1.3 ONVIF Compatibility and Included Software Overview ....... . 3
1.3.2 NVMS .............................................................. 3
1.3.3 CD Contents
....... . . . . . .............................................. 3
2. Connection ..................................... 4
3.
Camera Installation ............................. 5
4.
Finding the Camera’s IP Address ..................8
4.1 Finding the Camera’s IP Address Using NVMS .... . . . ...... . 9
4.2 Finding the Camera’s IP Address using
UPnP in Windows® 7. . 9
4.3 Finding the Camera’s IP Address using Bonjour® in Mac OS®
10
4.4 Finding the Camera IP using the BNC Test Cable ...... . . . . .
. 11
5. Configuring Remote Connection ..................12
5.1 Connecting to a DDNS address using NVMS . . . . . ......... . 15
6. Web Configuration .............................17
6.1 Supported Browsers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
6.2 Chrome, Firefox, and Safari Setup ......................
. 17
6.3 Internet Explorer® Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 18
6.4
Web Interface/Live Video Overview ...................... . 21
6.4.1 Live Video Menu ....................................................... 21
6.4.2
Configuring Camera Settings ............................................ 22
6.5 Device Info .......................................... . 23
6.6 Stream Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. 24
6.7
Device Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
6.7.1 Local Network ......................................................... 26
6.7.2 Device
Port ........................................................... 27
6.7.3
Camera .............................................................. 28
6.7.4
Date &Time .......................................................... 28
6.7.5
OSD ................................................................. 30
6.7.6
Microphone ........................................................... 31
6.7.7 BNC Video
Output ..................................................... . 32
6.7.8
Language ............................................................ . 32
6.8 Alarm Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
6.8.1 Disk Alarm ........................................................... . 33
6.8.2
Motion Alarm ......................................................... . 34
6.9 Local Record ........................................ 36
6.9.1 Record Directory ...................................................... . 36
6.9.2
Record Policy ......................................................... . 41
6.10 Privacy Masking .................................... 43
6.11
Network Service .................................... 44
6.11.1 DDNS .............................................................. . 44
6.12 Service Center...................................... 45
6.12.1 SMTP (Email Alert Setup) .............................................. . 45
6.13 Privilege Manager ................................... 46
6.13.1 Group .............................................................. . 47
6.13.2
User ............................................................... . 48
6.13.3
Unlocking User Accounts .............................................. . 49
6.14 Protocol ........................................... 50
6.14.1 Protocol ............................................................ . 50
6.15 Device Restart ...................................... 50
6.16
Default Settings .................................... 51
6.17
Sensor Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
6.17.1 Image Adjust ........................................................ . 52
6.17.2
Shutter Control ...................................................... . 52
6.17.3 Gain
Mode ........................................................... . 53
6.17.4
Day/Night Mode ...................................................... . 53
6.17.5
Auto Iris ............................................................ . 54
6.17.6
Gamma ............................................................. . 54
6.17.7 AE
Meter Mode ....................................................... . 55
6.17.8 WB
Setting .......................................................... . 55
6.17.9
WDR ............................................................... . 56
6.17.10
Mirror ............................................................. . 57
6.17.11
Noise Filter ......................................................... . 57
7. Resetting to Factory Defaults ................... 58
8. Dimensions .................................. 59
9.
Troubleshooting .............................. 60
eLineTechnology

1 2
1. GETTING STARTED
The system comes with the following
components:
• 1 x Camera
• 1 x Mounting Screw Kit
• 1 x Allen Key
• 1 x RJ45 Coupler
• 1 x BNC Test Cable
• 1 x Mounting Template
• 1 x Quick Start Guide
• 1 x Instruction Manual
• 1 x Software/Documentation CD
Mounting Screw Kit:
• 4 x mounting screws
(PA4 30mm)
• 4 x drywall anchors
Allen Key
RJ45 Coupler
BNC Test Cable
1.1 Default Camera Username, Password, and Ports
Username: admin
Password: admin
Ports: 80
(HTTP), 30001 (Control/Streaming), 8080 (RTMP), 554 (RTSP)
IP Address:
DHCP Enabled by Default (Router will automatically assign IP
address)
NOTE: Once you have completed the basic setup of the camera, it is
r e c o mmended t o configure a static IP addr es s. This will pr ev ent the c a mer a
IP address changing in the event of apower failure. For details, see “6.7.1
Local Network” on page 26.
1.2 Camera Interior Overview
Access panel. With Micro sd Card slot*. Status LED, camera reset & service
video
*microSD card slot (max. 64GB supported; SanDisk™/Kingston™ brand
memory cards
1.2.1 Functions of Status LED’s
• POWER (Top): Glows green when camera is connected to power.
• NET (Middle): Flashes red to indicate network activity. recommended)
CdS Light sensor
Lens Zoom
& focus adjust
eLineTechnology

3 4
1.3 ONVIF Compatibility and Included Software Overview
This camera is ONVIF v2.1 compliant. It is designed for interoperability with
popular VMS’s and NVR’s*, with backwards compatibility to ONVIF v.1.02. For
more information on
ONVIF, visit www .onvif .or g
NOTE: Provided software is PC compatible only; Mac OS® access to the
cameras is available via Safari® browser only.
1.3.1 NVMS
• NVMS is a client-only solution that supports up to 36 IP
cameras. NVMS is afree software provided on the CD.
• NVMS supports all the features of the camera. It can access microSD/ SD
card recordings and camera setup over alocal network.
• NVMS manual is provided on the CD.
1.3.2CD Tools
• CD contents Folders
IP Search ; Search find IP Cameras and set IP address and gateway
NTP Service Tool ; Time Sync Application:IP devices match one PC system time.
FTPUpdater ; Firmware Update tool
IP Support Help Files ; Website support help documents for common problems.
RTSP Tool ; provides RTSP string command f. e.g VLC or Quick-time use
SD Driver ; Ext2 driver for Windows XP to read sd Memory card on PC
Onvif_Help ; documents on Onvif specifications
Open the NTP service ; Windows XP only enables NTP time to be enabled.
Adobe Flash Player ; Flash Video player for Windows IE plugin and Apple Mac OS
Adobe AcrobatReader ; Windows and Max OS Acrobat Reader v10
Files:
IP_series_bitrate_calculator.htm ; Simple storage calculator for IP devices
NVMS_Install.exe ; NVR Software installation for PC
NVMS_Manual_1.7.pdf ; Guide to use the NVMS Software
SNMedia_Player.exe ; File Player for recorded files / backup files from devices /
NVMS.
2. CONNECTION
The camera has the following termination cables:
1. RJ45 Network Interface: Connect to a router or switch on your network
using RJ45 Ethernet cable (Cat5e or better). 100Mhz connection. PoE
supported (class 3
PoE switch r e quir ed).
NOTE: Use the included RJ45 coupler to connect to male end of RJ45
Ethernet cable.
RJ45 Coupl er
2. Audio Input (RCA): Connect to a self-powered microphone for lis t en-in
audio.
3.
Audio Output (RCA): Connect to an amplifier or self-powered speaker f o r
intercom/2-way audio.
4.
DC12V (1A): 12V DC power input terminal. Make sure to f o ll ow c o rr ect
polarity (+/-) marked on the power connector when connecting to power.
• Minimum Power Requirement: 450mA / 5.4W.
eLineTechnology

5 6
Connection
3. CAMERA INSTALLATION
Make sure to follow the correct polarity if connecting
the camera to
DC power. Polarity is marked on the
power connector.
1. Use the included allen key t o
r e mo v e make lose the top 1
camera will simple be removed
away from the base part.
2. Use the included mounting
template or the camera base 2
plate to mark holes
for the four
mounting
scr e ws.
Mounting Screw Hole
Mounting Screw Hole
3. Mount the camera to the
surface using the included
mounting screws (4x).
3
4. Now refit camera into base
Adjust position as needed
5. (Optional) Insert amicroSD
card into the camera. To
enable recording, you mus
t
format the microSD card and
configure microSD
recording. For details, see
“6.9.1 Record Directory” on
page 36.
sdCard access is behind
panel on camera
NOTE: The camera supports
microSD cards up to a
maximum size of 64GB.
SanDisk™ or Kingston™ brand
microSD cards are
recommended.
eLineTechnology

7 8
6. If you need to adjust the
viewing angle,
l o osen the 6
screws on the sides of the
ball camera and adjust the
ball camera.
. Tighten the
cover when finished.
7. Adjust camera zoom focus
Use service video cable 7
for BNC output.
Adjust the focus zoom
With small flat blade
FindingtheAddress
4. FINDING THE CAMERA’S IP ADDRESS
Use the steps below to find the camera’s IP address and connect to the
camera over the local area network
(LAN) using NVMS, UPnP on
Windows® 7, or Bonjour® in Mac OS®.
4.1 Finding the Camera’s IP Address Using NVMS
1. Install NVMS from the CD. Now Doubl e-click the NVMS icon ( )on the
Desktop.
The l o g in screen appears.
2. Under User Name and
Password , enter the default NVMS user name
( admin ) and password ( admin ). Click Login.
Enter Admin
Enter Admin
Click Login
3.
NVMS opens and scans the l o c a l network for connected c a mer as.
Detected camera IP addresses on the LAN appear in the
Device List on
the
left side of the screen with a icon.
Found camera
IP address
eLineTechnology

9 10
FindingtheAddress
4. Click on a camera IP address in Device List to l o gin.
5. Under
User Name , enter the user name for the camera (default: admin).
Under
Password , enter the password for the camera (default: admin).
Click Continue.
Enter Camera User Name
(default: admin)
Enter Camera Password
(default: admin)
Click Continue to login
6.
The camera appears under the camera IP address. Click and drag the
camera to the display grid to open
it.
Click and drag the
camera to the display
grid to open
it
NOTE: For detailed instructions on using NVMS, see the NVMS
manual on the CD.
4.2 Finding the Camera’s IP Address using UPnP in
Windows® 7
NOTE: To use this method, your router must support UPnP and the c a mer a
and computer must be on the same network. UPnP is enabl ed in the c a mer a
by default, and c a n be enabled/disabl ed using NVMS (check the NVMS
manual for details).
FindingtheAddress
1. Click Start>Computer>Network . The camera’s IP address appears
under Network
Infr as tructur e.
Double-click to open
the camera
Network
2. Double-click the camera to open it in your default browser.
3. Under User Name and
Password , enter the camera’s User Name
(default:
admin ) and Password (default: admin ) and click Login .
Enter Camera User Name (default: admin)
Enter Camera Password (default: admin)
Click Login
4.3 Finding the Camera’s IP Address using Bonjour ® in
Mac OS®
NOTE: To use this method, the camera and computer must be on the same
network. Bonjour® is enabled by default, and can be enabled/disabl ed
using NVMS (check the NVMS manual for details).
1. Open Safari® browser and click the Bookmarks button ().
eLineTechnology