E-line ELI-EPTZ-27DN User manual

PTZ Dome Camera
Operation Manual
ELI-EPTZ-27DN
Read this Manual carefully before installation and keep it for future reference.

Operation Manual ELI-EPTZ-27DN eLineTechnology.com
1
Notice:
Content
Chapter 1 Product Overview ...................................................................................... 2
1.1 Performance Instructions............................................................................ 2
Precautions:
1.Non-techinician is forbidden to operate this dome device before
reading this manual thoroughly.
2.Cut the power supply off before operating the dome device to avoid
damage caused by improper operation.
3.Interior of the Dome device are precision optical and electrical device.
Heavy pressure, shock and other incorrect operations should be
prevented. Otherwise, may cause damage on product.
4.Please do not remove and disassemble any internal parts of Dome
video camera by self in order to avoid normal usage being impacted.
There is no part inside the device, which can be repaired by users
themselves.
5.All the wiring of the dome device should be conducted strictly
according to the wiring instruction. When necessary, thunder-proof,
surge-proof and other protecting measures should be carried out.
6.Please do not use the product under the situations of exceeding
specified temperature, humidity or power supply specifications.

Operation Manual ELI-EPTZ-27DN eLineTechnology.com
2
1.2 Feature Functions Instruction..................................................................... 3
Chapter 2 Menu setting............................................................................................... 4
2.1 Operation instructions ................................................................................ 4
2.2 Main menu ................................................................................................. 5
2.3 Dome information ...................................................................................... 5
2.4 Display Options.......................................................................................... 6
2.4.1 Camera Name Setup............................................................................ 6
2.5 Control Options.......................................................................................... 6
2.5.1 Dome Addr Setup................................................................................ 7
2.5.2 Control Option Operation.................................................................... 7
2.6 Camera Options.......................................................................................... 7
2.6.1 Zoom and Focus.................................................................................. 8
2.6.2 Camera Exposure ................................................................................ 8
2.6.3 Others .................................................................................................11
2.7 Function Programming..............................................................................11
2.7.1 Preset..................................................................................................11
2.7.2 Program VectorScan.......................................................................... 14
2.7.3 Pattern ............................................................................................... 15
2.7.4 Sector Setup ...................................................................................... 16
2.7.5 Mask Zone......................................................................................... 17
2.7.6 Mask Color........................................................................................ 18
2.7.7 Motion ............................................................................................... 18
2.8 System setup............................................................................................. 20
2.8.1 Clear Memory ................................................................................... 20
2.8.2 Restore Def Setting ........................................................................... 20
2.8.3 Color System..................................................................................... 20
2.8.4 Dome Reset ....................................................................................... 21
Chapter 3 Short-cut Operations and Specification of Dome Device ............... 21
Chapter 4 Trouble Shooting of Dome Device ..................................................... 24
Chapter 1 Product Overview
1.1 Performance Instructions
Address of Dome device is from 0～255. The number (address) of dome device in
the control system is setup by the hardware (8-digit on and off switch) of dome device.
Integrated multi-protocol and auto protocol differentiation. Note: The dome device
only auto differentiate controller of the first communication.

Operation Manual ELI-EPTZ-27DN eLineTechnology.com
3
Pan 360 degree continuous scanning.
Tilt 90 degree action plus 2 degree angle adjustment. Plus the 2 degree
adjustment, the view angle can be 90 or 92 degree.
Pan manual operation speed can be 0.1 to 300 degree per second.
Tilt manual operation speed can be 0.1 to 120 degree per second.
128 preset positions.(A fixed position that aimed by the dome camera, which can
be set and revised by user arbitrarily)
The maximum running speed when preset position is being called can reach 400
degree per second with accuracy of ±0.1 degree.
Compatible with many kinds of Module Camera.(Sony, Hitachi, Sanyo, Yoke, CNB,
LG, Haitron, Samsung, Dahua)
Power supply: AC 24V/3A.
Easy installation interface.
Pass environmental protection grade IP66 (outdoor type).
Adopts long distance RS-485 transmission mode.
Transmission speed, i.e. Baud rate is selectable. (2400bps/4800bps/9600bps
/19200bps).
1.2 Feature Functions Instruction
English operation menu and function display.
Camera name, operation position and angle display. (The name of the camera
can be edited and the coordinate angle of the dome device can be displayed on the screen.)
Operation crosshair function.(Enable this option, the target can be captured more
effectively with crosshair on the screen.)
Three PTZ tours operation with 8 minutes record of each tour.(Can real-time
monitor and record the action of manual operation)
Six group of programmable vector scans.(including scan speed, dwell time, preset
position and interruption between tours)
Auto flip function with 10 degree move up.
24 sectors of programmable sectional mask.(Can mask part of the sectors of
camera, which differs depending on different types of camera)
8 sectors of programmable sectional display.(Can display the name and nature of

Operation Manual ELI-EPTZ-27DN eLineTechnology.com
4
concrete position shooting by the camera)
Auto enter function running after self-test of the dome device and auto enter
function running when there is no transmission.(Dwell time can be set from 5 to 999 seconds)
Freeze video picture function.(frozen picture function)
Operation return function.(after executing operation return, the dome device will
return to the previous operation)
Intelligent manual scan function.(execute this function in manual pan operation, you
can adjust the manual pan operation)
Intelligent power off real time memory.(If power is cut off when a certain function is
in operation, the dome device can resume working at where the power is cut off.)
High efficient 3-dimension scan.
Camera zoom in speed limit function.(When it is zooming in, the speed
of the dome device will auto slow down.)
Remote setting of dome address.
Chapter 2 Menu setting
2.1 Operation instructions
Menu operation instruction
To make a selection, move the joystick in the Up or Down direction. The on-screen arrow
points to the selected option. Using the joystick to the Left or Right position you can change the
value of your selection or enter the submenu for the selected option. Press the button CLOSE on
the keyboard controller to exit the menu or return to the previous menu(one layer up)
Number setup.
Joystick Left or Right when programming to select preset.
Press OPEN to confirm, open and display the number selection cursor
Joystick Left or Right to select the number to be entered
Press OPEN to confirm selection. The selected number is displayed on the
corresponding data bit.
Number of respective data bits are input as above.
Press CLOSE to exit or return to the previous menu level when programming is
done.

Operation Manual ELI-EPTZ-27DN eLineTechnology.com
5
2.2 Main menu
95+SHOT+ACK to enter the main menu of the dome as illustrated down.
2.3 Dome information
Joystick down to move the cursor to press OPEN or joystick left or right to move the joystick to
enter the menu.
TITLE
1LANGUAGE ENGLISH
2 DOME INFORMATION
3 DISPLAY OPTIONS
4 CONTROL OPTIONS
5 CAMERA OPTIONS
6 FUNCTION PROGRAMMING
7 SYSTEM SETUP
TITLE
The title may be different with different type
of dome.
1. Language Setup
Language: English.
2. Dome Information
Joystick down to move the cursor to press
OPEN or joystick left or right to move the
joystick to enter the menu.
3. Display Options
Display dome info or function.
4. Control Options
Set the pan or tilt and camera of the dome manually or auto compatible with the entire
control system. User individualized operation setting.
5.Camera Options
Set camera function.
6. Function Programming
Program and execute PTZ and VectorScan etc.
7. SYSTEM SETUP
System setup, Including, restore default setup clear memory, color system,
dome reset.
TITLE
CAMERA : xxxx
PROTOCOL : xxxx
BAUDRATE : xxxx
DOME ID : xxx
VERSION : xxx
IRIS CLOSE TO EXIT
TITLE
The title may be different with different type
of dome.
Display camera type\ protocol\
baundrate\dome ID\ software version

Operation Manual ELI-EPTZ-27DN eLineTechnology.com
6
2.4 Display Options
Set the display of dome info or function.
2.4.1 Camera Name Setup
Set the camera name
2.5 Control Options
Set Auto Flip、Auto Focus、Auto AE, etc Move the joystick left/right or press
OPEN to enter control options
Operation steps
[1].Joystick up/down to move the cursor to
select Display Options
[2].Joystick left/right to enter Display Option
[3].Joystick up/down to select either one of the
sub-menu
[4].Joystick left/right to select ON/OFF
DISPLAY OPTIONS
1 CAMERA NAME SETUP
2COORDINATES ON
3 START_UP SCR MSG ON
4CROSSHAIRS ON
CAMERA NAME SETUP
1 NAME ___________
2NAMEDISPLAY OFF
PLEASE ENTER:
WELCOME_________
ABCDEFGHIJKLN
OPQRSTUVWXYZ
0123456789_
IRIS OPEN WHEN DONE
IRIS CLOSE TO EXIT
1.NAME
[1].Move the joystick up/down to move the
cursor to select the Name.
[2].Move the joystick left/right or press OPEN
to enter name editing menu.
[3].Joystick left/right to select programming
position and press OPEN to confirm,
joystick left/right again to select( 0~9 or
A~Z ). Press OPEN to confirm selection.
Press CLOSE to exit or return to the
previous menu level when programming
is done.
6 VECTORSCAN STILL OFF
7AUTOFOCUS OFF
8AUTOAE OFF
9 VECTORSCAN AF OFF
10-2TILTLIMIT OFF
11 SPEED LIMIT OFF
CONTROL OPTIONS
1 DOME ADDR STETUP
2AUTOFLIP ON
3 PROPORTIONAL SPD ON
4 PAN REVERSE OFF
5 TILT REVERSE OFF

Operation Manual ELI-EPTZ-27DN eLineTechnology.com
7
2.5.1 Dome Addr Setup
2.5.2 Control Option Operation
Move the cursor to select Auto Flip/Proportional Speed/Pan Reverse/ Tilt
Reverse/VectorScan Still/VectorScan AF/-2 Tilt Limit/Speed Limit.
Move the joystick left/right or press OPEN to Display on/off/PTZ/Z/OFF
Auto Flip: If the camera lens auto rotates pan 180° then tilt 10° to auto track forward
when the lens goes down tilt 90°.
Auto AE: If the camera is AE when the dome device changes its pan or tilt or zoom.
VectorScan AF: If the camera AF when vector scan is running.
Speed Limit: the moving speed of dome device matching the video ratio to lower the
speed.
2.6 Camera Options
As the dome can support many type of cameras, so the camera menu will be different with different
cameras, the following camera menu take Sony camera menu as an example.
1. Joystick left/right to setup the addr type.
addr type through Physic/Logic.
2.Joystick left/right to change the dome ID(only
when addr type selects logic).
3.Joystick left/right to setup the broadcast ID
ON/OFF.
DOME ADDR SETUP
1 ADDR TYPE PHYSIC
2DOMEID 1
3BROADCASTID OFF
CAMERA OPTIONS
1 ZOOM AND FOCUS
2 CAMERA EXPOSURE
3OTHERS
Move the joystick left/right or press
OPEN to enter Camera options.

Operation Manual ELI-EPTZ-27DN eLineTechnology.com
8
2.6.1 Zoom and Focus
2.6.2 Camera Exposure
ZOOM AND FOCUS
1 ZOOM SPEED 7
2DIGITALZOOM ON
3 AF SENSITIVITY HIGH
1. Zoom Speed
Steps:
[1].Move the joystick up/down to select
ZOOM SPEED.
[2]. Joystick left/right to setup the camera
ratio speed.
2. Digital Zoom
Steps:
[1].Move the joystick up/down to move
the cursor to select DIGITAL ZOOM.
[2].Joystick left/right to setup the camera
digital zoom ON or OFF.
3.AF Sensitivity
Steps:
[1].Move the joystick up/down to move
the cursor to select AF Sensitivity.
[2].Joystick left/right to setup AF
Sensitivity function of the camera
ZOOM AND FOCUS
1 ZOOM SPEED 7
2DIGITALZOOM ON
3 AF SENSITIVITY HIGH
ZOOM AND FOCUS
1 ZOOM SPEED 7
2DIGITALZOOM ON
3 AF SENSITIVITY HIGH
CAMERA EXPOSURE
1AEMODE AUTO
2 SLOW SHUTTER OFF
3 SHUTTER SPEED AUTO
4 IRIS LEVEL AUTO
5 AGC LEVEL AUTO
6 BRIGHT LEVEL AUTO
7SPOTAE OFF
8WDR OFF
1.AE Mode
Steps:
[1].Move the joystick up/down to move
the cursor to select AE Mode.
[2].Joystick left/right to set up camera
in command of different switchover
(AUTO/MANUAL/IRIS etc.)
CAMERA EXPOSURE
1AEMODE AUTO
2 SLOW SHUTTER OFF
3 SHUTTER SPEED AUTO
2. Slow Speed
Steps:
[1].Joystick up/down to move the cursor

Operation Manual ELI-EPTZ-27DN eLineTechnology.com
9
3. Shutter Speed(Shutter Speed works
under Manuel/Shutter MD)
Steps:
[1].Joystick up/down to move the
cursor to select Shutter MD
[2].Joystick left/right to set up Shutter
S
p
eed
CAMERA EXPOSURE
1AEMODE AUTO
2 SLOW SHUTTER OFF
3 SHUTTER SPEED AUTO
4 IRIS LEVEL AUTO
5 AGC LEVEL AUTO
6 BRIGHT LEVEL AUTO
7SPOTAE OFF
8WDR OFF
CAMERA EXPOSURE
1AEMODE AUTO
2 SLOW SHUTTER OFF
3 SHUTTER SPEED AUTO
4 IRIS LEVEL AUTO
5 AGC LEVEL AUTO
6 BRIGHT LEVEL AUTO
7SPOTAE OFF
8WDR OFF
4. Iris (IRIS works under Manual/IRIS
MD)
Steps:
[1].Joystick Up/Down to move the
cursor to select IRIS LEVEL
[2].Joystick Left/right to set up the
size of IRIS
5. AGC Level(AGC Level works
under Manual MD)
Steps:
[1].Joystick Up/Down to move the
6. Bright level (It works under
AUTO/MANUALMD)
Steps:
[1].Joystick up/down to move the cursor to

Operation Manual ELI-EPTZ-27DN eLineTechnology.com
10
CAMERA EXPOSURE
1AEMODE AUTO
2 SLOW SHUTTER OFF
3 SHUTTER SPEED AUTO
4 IRIS LEVEL AUTO
5 AGC LEVEL AUTO
6 BRIGHT LEVEL AUTO
7SPOTAE OFF
8WDR OFF
CAMERA EXPOSURE
1AEMODE AUTO
2 SLOW SHUTTER OFF
3 SHUTTER SPEED AUTO
4 IRIS LEVEL AUTO
5 AGC LEVEL AUTO
6 BRIGHT LEVEL AUTO
7SPOTAE OFF
8WDR OFF
CAMERA EXPOSURE
1AEMODE AUTO
2 SLOW SHUTTER OFF
3 SHUTTER SPEED AUTO
4 IRIS LEVEL AUTO
5 AGC LEVEL AUTO
6 BRIGHT LEVEL AUTO
7SPOTAE OFF
8WDR OFF
CAMERA EXPOSURE
1AEMODE AUTO
2 SLOW SHUTTER OFF
3 SHUTTER SPEED AUTO
4 IRIS LEVEL AUTO
5 AGC LEVEL AUTO
6 BRIGHT LEVEL AUTO
7SPOTAE OFF
8WDR OFF
7.Spot AE(OFF/ON)
Steps:
[1].Joystick Up/Down to move the cursor
to select Spot AE.
[2].Joystick Left/right to set up the Spot AE
8.WDR(OFF/ON)
Needs support from camera：
Steps:
[1].Joystick up/down to move the cursor
to select WDR.
[2].Joystick left/right to set up the status
pattern of WDR.

Operation Manual ELI-EPTZ-27DN eLineTechnology.com
11
2.6.3 Others
2.7 Function Programming
2.7.1 Preset
1.Number
[1].Move the joystick left/right or press OPEN to enter the number editing programming.
PS: Program the number of preset position.
[2].Move the joystick left/right to select the number editing (numeral line 0~9),press
OPEN to confirm the selection. Press CLOSE to exit when your selection done.
OTHERS
1SHARPNESS 5
2BACKLIGHT OFF
3WBMODE AUTO
4RGAIN AUTO
5BGAIN AUTO
6 VERTICAL MIRROR OFF
7 HORIZONTAL MIRROR OFF
8IRSWMODE AUTO
9STABILIZATION OFF
10 FUNCTION OSD ON
FUNCTION PROGRAMMING
1 PRESET
2 VECTORSCAN
3 PATTERN
4 SECTOR SETUP
5 MASK ZONE
6 MASK COLOR
7 MOTION
Preset option
1. Move the joystick left/right or press
OPEN to enter Function Programming
options.
2. Move the joystick up/down to move the
cursor to select the preset options.
3. Move the joystick Left/Right or press
OPEN to enter preset options.
1. Move the joystick up/down to move the
cursor to select the options.
2. Move the joystick Left/Right to set up
the options.

Operation Manual ELI-EPTZ-27DN eLineTechnology.com
12
2.Set Preset
[1].Move the cursor to select preset position.
[2].Move the joystick left/right or OPEN to enter the setting(ensure the preset position
data you desire to save)
[3].Press OPEN to finalize your selection, then the screen displays STORED and
return to the previous menu level. Or press CLOSE to return to the previous menu
level. without save your selection.
3.Call Preset
PRESET
1NUMBER 1
2 SET PRESET
3 CALL PRESET
4 DELETE PRESET
5 NAME ____________
6NAMEDISPLAY OFF
Call Preset
[1].Move the joystick left/right or press
OPEN. The lens auto switch to current
preset position corresponding to the
edited No.
PRESET
1NUMBER 1
2 SET PRESET
3 CALL PRESET
4 DELETE PRESET
5 NAME _____________
6NAMEDISPLAY OFF
IRIS OPEN WHEN DONE
STORED
INPUT RANGE:
1~50 64~77 102~165
001
0123456789
IRIS CLOSE WHEN DONE
PRESET
1NUMBER 1
2 SET PRESET
3 CALL PRESET
4 DELETE PRESET
5 NAME ____________
6NAMEDISPLAY OFF

Operation Manual ELI-EPTZ-27DN eLineTechnology.com
13
4. Delete Preset
5. Name
6. NameDisplay
Delete preset
[1].Program the desired deleting number
referring to Number Setup Section so
as to select the preset position to be
deleted.
[2].Move the cursor to select Delete
Preset Move the joystick left/right or
press OPEN to enter the Delete Preset.
[3].Press OPEN to confirm the selection
and exit. Press CLOSE to cancel the
selection and exit.
ARE YOU SURE TO DO THIS?
IRIS OPEN TO CONFIRM
IRIS CLOSE TO CANCEL
NameDisplay
Setup On/Off display on the direction
name preset.
[1].Move the cursor to select name
display.
[2].Move the joystick left/right to set ON
or OFF of the name display.
PRESET
1NUMBER 1
2 SET PRESET
3 CALL PRESET
4 DELETE PRESET
5 NAME _____________
6NAMEDISPLAY OFF
PRESET
1NUMBER 1
2 SET PRESET
3 CALL PRESET
4 DELETE PRESET
5 NAME ____________
6NAMEDISPLAY OFF
PRESET
1NUMBER 1
2 SET PRESET
3 CALL PRESET
4 DELETE PRESET
5 NAME _____________
6NAMEDISPLAY OFF
Name
[1].Move the joystick up/down to move the
cursor to select the Name.
[2].Move the joystick left/right or press
OPEN to enter name editing menu.
(Please refer to name setting section of
Camera Name Setup)

Operation Manual ELI-EPTZ-27DN eLineTechnology.com
14
2.7.2 Program VectorScan
Function: User can make different auto scan according to various inspection.
Programming VectorScan instruction
[1].Joystick Up/Down to select Program
VectorScan.
[2].Joystick Left/Right or press OPEN to
enter the programming.
[3].Joystick Up/Down to select pending
programming serial number(number
range:1～6).
[4].Move the Joystick to select and enter
the items of Program a VectorScan
(
items include:name/number/SP/dwell
)
.
I:Name
Pr:stands for Preset Position.
Vs:stands for VectorScan.
Pt: stands for PTZ Tour.
II:Number Programming-selection
based on the name.
III:SP-Set up the speed of Preset.
IV:Dwell
Vectorscan running operation steps:
I:Select pending Vectorscan track in
Number menu
II:Joystick Up/Down to select Vectorscan
III:Joystick Left/Right or press OPEN to
run the selected Vectorscan track
FUNCTION PROGRAMMING
1 PRESET
2 VECTORSCAN
3 PATTERN
4 SECTOR SETUP
5 MASK ZONE
6 MASK COLOR
7 MOTION
VECTORSCAN
1NUMBER 1
2 PROGRAM A VECTORSCAN
3 RUN A VECTORSCAN
4 DELETE A VECTORSCAN
PROGRAM VECTORSCAN 1
NAME NUM SP DWELL
1.
2.
3.
4.
... ...
16.
IRIS CLOSE WHEN DONE
DELETE A VECTORSCAN
Vectorscan track deletion steps:
[1]:Select pending deleting vectorscan track in Number menu.
[2]:Joystick Up/Down to select Delete a VectorScan.
[3]:Joystick Left/Right or press OPEN to delete the selected vectorscan track.

Operation Manual ELI-EPTZ-27DN eLineTechnology.com
15
2.7.3 Pattern
Function: User can program three traces simulating manual operation.
FUNCTION PROGRAMMING
1 PRESET
2 VECTORSCAN
3 PATTERN
4 SECTOR SETUP
5 MASK ZONE
6 MASK COLOR
7 MOTION
PATTERN
Pattern Operation Steps:
[1].Joystick Up/Down to move the
cursor to select Pattern.
[2].Joystick Left/Right or press OPEN
to enter the menu.
[3].Joystick Up/Down to select pending
operating or programming
Pattern(number range:1～3).
[4].Joystick Up/Down to move the cursor
to select Program a Pattern.
[5].Press OPEN to enter recording of the
manual running trace .as left Fig 1.
[6].Press CLOSE to finalize the
selection. as left Fig 2.
[7].Joystick Up/Down to move the cursor
to select NAME.
[8].Edit name (Please refer to name
setting section of preset position)
PATTERN
1NUMBER 1
2 PROGRAM A PATTERN
3 RUN A PATTERN
4 DELETE A PATTERN
5NAME ______
6NAMEDISPLAY OFF
IRIS OPEN TO BEGIN
IRIS CLOSE WHEN DONE
Fi
g
1
Fi
g
2
[9]. Joystick Up/Down to move the cursor to select Name Display.
RUN A PATTERN
Running Pattern Tracking Operation Steps:
[1].Select pending running Pattern trace from NUMBER.
[2].Joystick Up/Down to select Run a Pattern.
[3].Joystick Left/Right or press OPEN to run the trace of selected Pattern.

Operation Manual ELI-EPTZ-27DN eLineTechnology.com
16
2.7.4 Sector Setup
Function: To display the sector name when dome in the setted area
FUNCTION PROGRAMMING
1 PRESET
2 VECTORSCAN
3 PATTERN
4 SECTOR SETUP
5 MASK ZONE
6 MASK COLOR
7 MOTION
Sector Setup:
[1].Move the joystick up/down to move
the cursor to select sector setup.
[2].Move the joystick left/right or press
OPEN to enter the setting.
SECTORSETUP
1NUMBER 1
2 PAN START POS 0.0
3PANENDPOS 0.0
4 TILT START POS 0.0
5TILTENDPOS 0.0
6NAME ________
7NAMEDISPLAY OFF
DELETE A PATTERN
Delete Pattern Operation Steps:
[1].Select pending Delete Pattern trace from NUMBER.
[2].Joystick Up/Down to select Delete a Pattern.
[3].Joystick Left/Right or press OPEN to enter and Click OPEN to delete
the trace of selected Pattern as below Fig 3～Fig 4
[1]. Number
Joystick left/right or press OPEN to
select the sector number(number
range:1～8).

Operation Manual ELI-EPTZ-27DN eLineTechnology.com
17
2.7.5 Mask Zone
Function: User can protect the partial area by mask setting from the whole monitoring
area according to the situation.
[2].Pan Start POS \Pan End POS\Tilt Start POS\ Tilt End POS
.Move the joystick left/right or press OPEN to select a Pan Start Point \Pan End
Point\ Tilt Start Point\ Tilt End Point.
⑵.IRIS OPEN when done or press CLOSE to exit, but not save.
[3].Name
⑴.Select the sector name and press OPEN to enter name editing.
⑵.Edit the name referring to preset setup instruction.
[4].Name Display
Joystick Up/Down to move the cursor to select Name Display of ON or OFF.
MASK ZONE
1NUMBER 1
2 MASK EDIT
3 MASK DISPLAY OFF
MASK ZONE
[1].Number
.Joystick Up/Down to move the cursor to
select NUMBER.
⑵.Joystick Left/Right to select pending
editing mask areas(from area1-24).
[2].Mask Edit
.Joystick Up/Down to move the cursor to select Mask Zone.
⑵.Joystick Left/Right or press OPEN to enter editing.
⑶.Press OPEN to edit the mask zone, capture the mask point. Press NEAR,
FAR (set the mask area in pan action), WIDE, TELE (set the mask area in
tilt action) to adjust the area of mask zone. Press CLOSE to exit when done
and return to upper stage menu.
[3].Mask Display
Joystick Left/Right to set up the display name of ON/OFF.

Operation Manual ELI-EPTZ-27DN eLineTechnology.com
18
2.7.6 Mask Color
Function: set the mask color.
2.7.7 Motion
MASK COLOR
1 MASK COLOR GRAY5
2 SEMI-TRANSPARENCY OFF
[1]. Mask color
. Joystick Up/Down to move the cursor
to select MASK COLOR.
.Joystick Left/Right to move the cursor
to select the Mask color.
PARKACTION
1ACTION NONE
2NUMBER 1
3 PARK TIME 120SEC
Park action function
The lens will auto return to the assigned
preset position or perform certain motion
using command set by user when the
camera does not receive orders from
controllin
g
device.
[1].Move the joystick left/right or press OPEN to enter the PARK ACTION.
.Action
Ⅰ.Move the joystick left/right or press OPEN to enter the Action panel.
.Joystick left/right to select Action. Action by None/Preset/VectorScan/
Pattern/PanScan/AutoScan.
.Number
Ⅰ.Select the Number and press OPEN or move the joystick left/right to enter
Number editing.
Ⅱ. Setup method: referring to preset setup instruction.
MOTION
1 PARK ACTION
2 POWER ON ACTION
3 LIMIT OPERATION
4 AUTO TRACK SETUP <NA>
[2]. Semi-transparency
.Joystick Up/Down to move the cursor to select SEMI-TRANSPAREN.
⑵.Joystick Left/Right to set up the Semi-transparency of ON/OFF.
MOTION
[1].Move the joystick left/right or press
OPEN to enter sub-menu.
[2].The menu of “AUTO TRACK SETUP”
is invalid.

Operation Manual ELI-EPTZ-27DN eLineTechnology.com
19
[3]. Move the joystick left/right or press OPEN to enter the Limit Operation.
.Start Position
⑵. End Position
Refer to Start Position setting section.
.Direction
Move the joystick left/right to select the Direction(left or right).
.Operation
Select the OPERATION and move the joystick left/right set up the Operation of
POWER ON ACTION
1 ACTION VECTORSCAN
2NUMBER 1
[2].Select the Power on Action and
move the joystick left/right or press
OPEN to enter the Power on Action.
. Select the Action and move the joystick left/right or press OPEN to enter Action.
Actionincludes:None/Preset/VectorScan/Pattern/PanScan/AutoScan
.Select the Number and move the joystick left/right or press OPEN to enter. Setup
method: refer to preset setup instruction.
Move the joystick
left/right or press OPEN
IRIS OPEN WHEN DONE
LIMIT OPERATION
1 START POSITION 0.0
2ENDPOSITION 0.0
3DIRECTION RIGHT
4OPERATION OFF