E-matic eGlide Pro 2 User manual

1
Contents
1. Preface
2. Safety Notices
3. Ready to Use
3.1 Packing List
3.2 Product Appearance
3.3 Instructions on Keys
3.4 Features Overview
3.5 Technical Specifications
4. Quick Guides
4.1Switch On/Off
4.2Battery Management and Charging
4.3 Operation of the Function Icons
4.4WIFI Settings
4.5USB-HOST and Extended Function
4.6.1 External USB Function
4.6.2 External 3G USB Dongle Function
4.6.3External RJ45 USB Dongle Function
4.7 Camera Function
4.8 HDMI Function
4.9 MicroSD Card Storage
4.10 APK Install and Manage
5. Operation Details
5.1 Desktop System 1(Multimedia)
5.1.1 Audio Player
5.1.2 Video Player
5.1.3 Photo Browser
5.1.4 Sound Recorder
5.1.5 Explorer
5.2 Desktop System 2 (E-book)
5.2.1 Local E-book Reader
5.2.2 Online E-book Reader
5.3 Desktop System 3 (Network Function)
5.3.1 Web Brower
5.3.2 Email
5.4 Desktop System 4 (Games)
5.5 Desktop System 5 (Other Functions)
5.5.1 Calculator
5.5.2 Clock
5.5.3APK Installer

2
5.5.4Settings
5.5.4.1 Wireless and network
5.5.4.2 Sound
5.5.4.3 Display
5.5.4.4 HDMI
5.5.4.5 Location and security
5.5.4.6 Application
5.5.4.7 Accounts and sync
5.5.4.8 Privacy
5.5.4.9 Storage
5.5.4.10 Language and keyboard
5.5.4.11 Voice input and output
5.5.4.12 Date and time
5.5.4.13 About MID
5.6 Desktop Function Icon and Setting
5.6.1 Desktop Function Icon
5.6.2 Desktop Notification
5.6.3 Add, Move, or Delete Desktop Icon
6. Firmware Update
7. Troubleshooting and FAQ
7.1Troubleshooting
7.2Frequently Asked Questions
8 Limitations of Liability Statement
8.1 Links to Third Party Sites
8.2 Limitation of Liability

3
1. Preface
Dear Customers,
Thank you for purchasing our product!
This device is a built-in high performance WiFi receiver module,
supporting an external 3G USB-DONGLE wireless network card,
using broadband wireless networks, breaking through the restraint of
network cables; it will bring you into the portable media player world
and fulfill your entertainment needs. It also supports picture
browsing, eBook reading, games, online chat and other functions;
various settings will fully show your individuality.
To operate this player easily, first, please read this User Manual
included with the player. Before operating this player, please
carefully read all data we provide about the player, so that you will
have a better understanding of the product and its operations.
The Company will not be responsible for any loss of personal data
and damage caused by incorrect operation of the
Software/Hardware, artificial damages, replacement of batteries or
any other accident. To avoid loss of your data, please backup your
data to your computer at all times.
Also, since we cannot control any dispute from users’
misunderstanding or incorrect operation against the manual, the
Company will not take any relevant responsibility for any accidental
loss potentially occurring in the process of using this manual.
Due to constant product development, the information in this manual
is subject to change without any prior notice.
This manual is protected by copyright and no part is permitted to be
copied or reproduced in any way without prior written permission of
the Company.
The Company reserves the final explanation right of this manual,
warranty as well as its related information.
(Note: When compiling this manual, we are very careful to provide
you completely reliable information. However, there is inevitably
some error and oversight, please understand, and we welcome your
suggestions. If any problem occurs during your use of this product,
please immediately contact your local seller)
Thanks for your support and please pay attention to our other
products

4
2. Safety Notices
1) Please keep the device away from strong magnetic fields in order
to avoid damage to the product.
2) Please do not let the device fall onto, rub against or knock against
hard objects during use, because this may cause surface scratches
on the device, battery damage, dataloss or other damage to the
hardware.
3) Never let this product be exposed to a humid environment or rain
as the water leaking into the device could disable it to the extent of
being beyond repair.
4) Never clean the device with any chemicals or detergent, these will
damage the product surface and corrode the finish.
5) You are recommended not to use the headset with the volume at
its highest settings, please adjust the volume to an appropriate safe
level and limit the amount of time you spend using headphones to
avoid possible damage to your hearing. Excessive volume will cause
permanent hearing damage.
6) Please do not cut off the power abruptly during software updates
or downloading, because this may cause dataloss or system errors.
7) Over-voltage, power cable strain and bending or squeezing of the
power cable by heavy objects must be avoided to prevent the
possibility of overheating or fire.
8) In order to eliminate the risk of electric shock, do not touch the
cable power plug with wet hands.
9) Some movies, music and pictures are under the protection of
copyright, unauthorized usage is deemed as an infringement to the
laws of copyright.
10) Please don’t turn on the device on in locations where wireless
equipment is forbidden or when the usage of the device will cause
interference and possible danger.
11) All the wireless equipment is subject to external interference and
this can affect its performance.
12) Please comply with any related restrictions and rules, wireless
equipment can influence the flight of the plane; please consult the
relevant airline company if you intend to use the device on a plane.
13) Please don’t use the device in a petrol station, or near to fuel or
chemicals.
14) Please comply with any related restrictions and rules; do not use
the device where blasting operations are in progress.
15) Only qualified maintenance personnel can install or repair the

5
device. Opening the device in any way will void the warranty.
16) Please use the original accessories and battery provided with
the device, do not use the incompatible products.
17) The device is not waterproof, please keep it dry.
18) For the sake of data safety, please back up any important
information on the device, or keep a handwritten record.
19) When connecting with other devices, please read the user
manual for detailed safety instructions. Do not connect the device to
incompatible products.
3. Ready to Use
3.1 Packing List
Components
Quantity
eGlide Pro 2 Tablet
1
Wall Charger
1
USB Cable
1
User Manual
1
CD-Rom
1
Warranty Card
1
eMusic Card
1
Kobo Offer
1

6
3.2 Product Appearance
3.3 Instructions on Keys
Symbol
Name
Description
A
RESET
Short press this button to reset
the system when the device has
stopped working (Freezes)
B
POWER
Short press this button to enter
sleeping/wake up mode, press
long to switch ON/OFF
C
MENU
Press this button shortly to enter
the submenu
D
ESC
Short press to return, long press
to enter the touch screen
calibration
E
MicroSD Card Slot
Micro SD Card Slot
F
HDMI
1080P HDMI Jack
G
Stereo Earphone Jack
Stereo Earphone Jack
H
DC Socket
Connect with 5V@2A Charger
I
MINI USB Port
MINI_5 PIN USB Port
J
USB Host Port
Port for external USB Driver,3G
Dongle, Mouse, etc
K
Display
HD Display area
L
Camera
Front camera
3.4 Features Overview

7
ARM embedded Dual CPU Structure（ARM Cortex A9 1.0GHz）
with ANDROID 2.3 operating system
7" high resolution TFT capacitive multi touch panel LCD display,
800x480 pixel resolution
Supports 4GB built-in Flash memory, supports max. 32GB
external Micro SD card
Supports HD 1080P MKV, AVI, RM, RMVB, MP4, MOV, VOB,
DAT, FLV, 3GP, H.246 etc formats, Max resolution supported is
1920*1080
Supports MP3, WMA, OGG, APE, FLAC, AAC, WAV audio
formats and multi EQ modes
Supports JPG, JPEG, BMP, GIF etc. picture formats
Supports TXT, LRC, PDF, Html, Html, EPUB file formats,
supportsauto-browse, zoom, bookmarks, flip over functions
WiFi ready, you can connect with broadband wireless internet and
operate various software in the Android 2.3OS, the system is
preset parts of third softwares: Office (Open Office version),
Google browser, IM (MSN/QQ), Web TV, Online MP3, online
novel, network games, eBook, etc
Supports built-in microphone recording function
Supports USB-HOST and external U-disk, Keyboard, Mouse, etc
Supports external 3G USB-DONGLE wireless network card (3G
card or USB-Dongle should be purchased separately)
Supports built-in front web camera
Supports 1080P HDMI output
Supports G-sensor screen rotation function
Supports built-in speaker and stereo earphone jack
Supports multiple languages
Can be used as a USB portable hard disk, driver not needed for
WIN2000 or above

8
3.5 Technical Specifications
Size
7.0” TFT capacitive touch panel LCD
display 160k color
LCD Display
Resolution
800x480
PC interface
High speed USB2.0 (FS)
Built-in Flash
Flash Memory: 4GB
Built-in RAM
RAM: DDRIII 512MB
Capacity Expansion
Support MicroSD Card, capacity 1GB~32GB
Built-in 3.7V@4000mAH Lithium rechargeable battery AC charger,
Input: AC110V~240V, Output: DC 5V@2A
Power Supply
Max. 6h video playing time（factory default）
Format
MP3, WMA, OGG, APE, FLAC, AAC, WAV
Headset max. output
（L）5mW＋（R）5mW（32Ohm）
MP3 Bit rate
8Kbps ~ 392 Kbps
WMA、WMV、Bit rate
5Kbps ~ 192 Kbps
Frequency response
20Hz to 20KHz
SN ratio
90dB
Music Function
Distortion
＜0.05%
Play format
MKV, AVI, RM, RMVB, MP4, MOV, VOB,
DAT, FLV, 3GP, etc
Max Resolution
1920x1080
Video Function
Ratio
4:3, 16:9, full screen for optional
Photo Browse
Support max. 8000x8000 JPG, JPEG, BMP, GIF
Format
TXT, LRC, PDF, Html, Htm, EPUB, etc
eBook Function
Max. capacity
5M
Main chip set
802.11b/g/n
Transmission rate
Max108Mbps
WI-FI Function
Work Frequency
2.4GHz
Main chip set
IT6610 (Optional)
HDMI Function
Resolution
720P, 1080P
Camera Function
Support front web camera function
Recording function
Format
WAV
Working temperature
-5 -40 
Languages
English, French, German, Spanish, Simplified Chinese, Traditional
Chinese, etc
Operation systems
supported
Windows98SE/ME/2K/XP

9
4. Quick Guides
4.1 Switch On/Off
Switch ON and Unlock: When the device is in its OFF mode, press
and hold the Power key for 3 seconds to enterthe Android startup
process. The device will take about 100 seconds to enter the system
desktop, with the display in locked mode, please press and slide the
iconout of the white circle, the display will unlock automatically,
see the image below:
When the device is not in use, please put it into SLEEP mode, then
the device will be ready to use whenever you like, and you don’t
need to start the Android operating system again.
4.1.1 Power Saving Mode and Locked Mode:Pressing the
“POWER” key when the device is in use will result in the system
entering SLEEP power save and locked mode. Pressing the
POWER key will return the system to locked mode within 1 second.
Note: The primary operation of the device will not stop under the
power saving mode, it is just the display that is turned off and
showing a black screen. This means that music or movie playback
etc. will still continue to run.
4.4.2 Switch OFF: When the device is in use, press and hold the
POWER key for 3 seconds, the screen will display the power off
interface, choose the power off option to confirm your selection and
the system will shut down automatically.
Note: When the device is running low on battery power, it will sound
an alarm and then shut down automatically if it isn’t plugged intoa
power source to start charging. If the device cannot start up please
check if the battery power is too low by charging the device.
4.2Battery Management and Charging
4.2.1 Charge the battery about 8-12 hours to make sure the battery
is fully charged for the first time.
4.2.2 Insert the micro port of the battery adaptor into the DC slot on
the device, and connect the other side with the power socket. The
desktop icon of the battery will be rolling to show it is charging,
please wait until the battery is fully charged, don’t disconnect the

10
power when charging. Once the battery is fully charged the Icon on
the desktop will stop rolling. When the battery is exhausted
completely, please charge at least one minute before starting it up
Note:In order to keep the battery working to its full potential, please
pay attention to the following advice:
1) Don’t charge the power in excessively high temperatures.
2) There is no need to run down the power for this Li-ion battery, you
can charge the battery even when there is still power left in the
battery without it affecting the lifespan of the battery.
3) In order to keep the battery in good condition, Make sure you
charge it at least once every two weeks if the device hasn’t been
used for a long time.
4.3 Operation of the Function Icons
Definition of the Function Icons:
Icon
Function
instruction
Icon
Function instruction
Back to main menu
Notifications
Google Search
Voice Search
Menu Switch
App Menu
Browse All Menu
Google Search
Return
Home Page
Recent Browse
Function Menu
Reduce the volume
Increase the volume
Notifications
WiFi Status
Power Status
System Time
4.4 WI-FI Settings
4.4.1 Turn on WIFI: Tap the App Menu icon to enter into the
app menu list, tap “Settings” to enter into the setting interface, tap
“Wireless and networks” to setup, select the “WiFi”as below:

11
4.4.2 Connecting to a network: Tap “Wi-Fi Settings” to enter this
menu, the device will find the WiFi networks automatically. Please
refer to the example picture below, it has found several WiFi network
names:
After selecting the network you would like to connect to, the system
will either connect to the network. If the network is secured and
requires a security key to be entered, the system will pop up a
connection window where you can input the correct security code
and then press “Connect”.
The system will connect to the network automatically, and once
connected will show a Status of “Connected” You can see the
network connection status by pressing the network name, see the
figure below:
4.2.3 IP address settings and connection: There are two setting
methods to allow the IP address to be set. Whether the IP Address is

12
distributed automatically or not, is depended on the Wi-Fi Router’s
settings.
1) IP Address is assigned automatically:
By default this device is setup to be assigned an IP Address
automatically.
If the wireless network you want to connect to, assigns the IP
Address automatically, but the settings have been changed to a
Static IP Address, use the following procedure to change the
settings. Tap the Function Menu icon on the bottom of the
screenand tap “Advance”, then un-tick the selection in the “Use
static IP” box.
Tap the Function Menu icon on the bottom of the screen then
tap “Save” to complete this setting, see the figure as below:
Tap the Return icon once complete, the system will return you
to the Wi-Fi settings screen. Selectthe network you would like to
connect to, for example, double tap “KW” network, the system will
enter into an interface and ask you to input the code. Input the
correct code and press “Finish”,the system will connect and
distribute the IP address automatically. It will show “Connected”
once the system has completed connecting. You can see the
network connecting status accordingly when you select the network
name, see the figure shown below:

13
2) Manual Setup –Static IP Address:
If the Wi-Fi network requires a Static IP Address, please use the
following procedure to change the settings. Tap the Function Menu
icon on the bottom of the screenand tap “Advance”
Select the “Use static IP” tick box, and then set the IP address,
Gateway and Netmask using the information you have for that
Network. See the figure below:
Tap the Function Menu icon on the bottom of the screen then
tap “Save” to complete this setting, see the figure as below:
Selectthe network you would like to connect to, for example, double
tap “KW” network,the system will enter into an interface and ask you
to input the code. Input the correct code and press “Finish”. The
systems will connect to the static IP address that you input. It will
show “Connected” once the system has completed connecting. You
can see the network connecting status accordingly when you select
the network name. There will be a WIFI icon see the figure as
below:

14
4.6 USB-HOST and Extended Function
If you would like to attach an external USB device such as a 3G USB
Dongle,USB Storage Device or USB Keyboard, please follow the
procedure below.
4.6.1 External USB Function
This device supports OTG function. Please insert the USB disk into
the USB HOST port, then tap the “Explorer“ located in the
applications menu,select “USB” to enter into USB disk, see the
figure shown below:
To unmount the USB disk, enter the settings menu. Then select
storage, scroll down to USB storage and select “Unmount USB
Storage”. You will be prompted when it is safe to remove the USB
disk.
4.6.2 External 3G USB Dongle Function
1) Insert the 3G USB-Dongle to USB HOST interface.
2) Press “Settings”, to enter into the setting interface, press
“Wireless and networks” to enter the setup interface. Un-tick box
behind the “Wi-Fi”to disable it (Note: Wireless and Mobile networks
can’t be enabled at the same time). Tick the box behind “Mobile
network” in to enable mobile networking, the 3G network icon
will be showed on the bottom of the screen when device

15
connects the 3G successfully.
Note: If mobile networking won’t turn on, please check and confirm
the 3G USB Dongle that you are trying to use is compatible with this
device.
4.6.3 External RJ45 USB Dongle Function
1) Insert the External RJ45 Card USB Dongle, and tap the “Ethernet
settings” into the network settings.
2) Select “Ethernet”, if the Router assigns the IP address
automatically, the system will connect to the network automatically.
If the IP address is assigned statically, please select “Use static IP”,
then set the correct IP address, Gateway, Netmask and DNS to
connect the network.
4.7 Camera Function
Tap the App Menu icon to enter into the app menu list, tap
“Camera” to enter into the camera function interface:
Camera function buttons description:

16
Button
Button Description
Function Introduction
A
Video Icon
When B slides to A, it is the
Video Mode
B
Video and Photo
Switched Icon
For selecting the Video/
Photo function
C
Photo Icon
When B slides to C, it is the
Photo Mode
D
Starting and Stopping
Icon
For starting/stopping the
Video/ Photo
E
Photo/Video Preview
Icon
For previewing the Video/
Photo
F
Camera Setting
Tap to view the setting
options
G
Store Location
Tap to select store location
on/off
In the photo mode, tap the menu button, the interface pops up as
below:
1) Tap toswitchtovideofunction.
2) Tap topreviewthephotos.
1) Tap tochangethePictureSizeandthePictureQuality.
2) Tap tosetthe Store Location Off or On.
3) Press Esc button to exit video/photo mode.

17
4.8 HDMI Function
You will enjoy 1080P HDMI video playback on your HD TV using the
Video player function.
1) Connect the TV to the device by using an HDMI Cable.
2) Tab the “Settings” icon in the desktop, and then select HDMI
settingsto transfer the contents on the device to the TV display.
3) HDMI Resolution setup: Select the correct HDMI output resolution
according to your HD TV configuration.
4) Screen Zoom setup: Select the screen size of the output video.
4.9 MicroSD Card Storage
There is a MicroSD card slot in this device. It supports reading files
on a MicroSD card.
1) Insert the memory card into the card slot on the correct side
(metal contacts facing down).
2) Do not pull out the card when it is in use (reading, copying),
otherwise, it may cause data errors.

18
3) Do not use the memory card in high temperature conditions.
4) Keep the memory card away from liquid and erosive materials.
5) To remove the card, enter the settings menu and select storage
settings. Select “Unmount SD Card”. You will then be prompted
when it is safe to remove the card. Just push the card towards the
slot, this will automatically release the card.
4.10 APK Install and Manage
This device supports installing third partyapplications programs
designed to run on Android. Many application programs can be
downloaded from internet and then installed by the APK Installer.
Tap the App Menu icon to enter into the app menu list, tap
“APK Installer” to enter into the interface as below:
4.10.1 Install: Press “Install”to enter into the APK installer interface.
The installation .apk files could be installed from two locations: 1)
Internal Memory which means the built-in storage. 2) MicroSD Card
which means a memory card inserted into the MicroSD card slot.
Select the program to be installed from the right window, tap it to
install and follow the prompts.

19
4.10.2 Manage: Tap to Launch, Export,Uninstall the applications.
The default view shows all the applications installed on the device,
tap the icon of the application you would like to manage.
1) Launch: Tap to run the software.
2) Export: Tap to export the software to the MicroSD card.
3) Uninstall: Tap to uninstall the software.
4) Cancel: Tap to return to the main menu.
Note: Only the user-installed applications could be uninstalled.
5. Operation Details
5.1 Desktop System 1 (Multimedia)
5.1.1 Audio Player
The device supports the following audio file formats: mp3, wav, midi
and wma.
In the application menu or on the desktop, tap the icon to launch
the audio player.

20
If there are no music files in the audio player playlist, the system will
automatically load any music files from the MicroSD card to the
audio player playlist after the audio player is launched.
1) If there are many songs in the music play list, slide up/down the
list by using the touch screen.
2) In the music playing interface, tap to enter into the audio
playing list.
3) Drag the playback progress bar to
adjust audio playback progress.
4) Drag bar to adjust the audio play volume.
5) Tap tochangeplaymode.
6) Tap tochangetheplayEQ.
Audio Player Buttons Description:
Button
Function
Button
Function
Current Playing
Play Audio
Go to previous song
Skip to next song
Audio List
Artist
Album
Playlist
Note: Audio player can play WAV record files
5.1.2 Video Player
The device supports the following video file formats: MKV, AVI, RM,
RMVB, MP4, MOV, VOB, DAT, FLV, 3GP.
In the application menu or on the desktop, tap the icon toenter
into the video player interface.
When no video files are in the video player playlist, the system will
automatically load any music files from the MicroSD card to the
video player playlist after the video player has been launched.