EAD HP3000 User manual
WHAT IS IN THE BOX
Your HP3000 package contains the following:
HP3000 Tube Hybrid
Headphone Amplier
with Bluetooth®
Quick Start Guide
(1) HP3000 unit
(1) 24V AC Power Supply Adaptor
(1) Quick Start Guide
(1) Registration Card
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Ing. and any use of such marks
by Elite Acoustics Designs, Inc is under license
NOTE: Due to continuous development and improvements of our products, features and specications are subject to
change without notice. All weights and measures are approximate.
HEADPHONE QUICK START
1. Make sure the Volume Controls are completely turned counter-clockwise before
you turn the Power on.
2. Connect the DC power cord to the back panel of the unit.
3. Turn on the Power switch.
4. Connect source input to unit (XLR, RCA, Aux, USB* and/or Bluetooth®)
To connect using Bluetooth® hold down the MODE button for approx.
5-secs until you can discover it in your Bluetooth® device.
Flashing Blue & Green LED: indicate Bluetooth® is ready to be paired.
Flashing Blue LED only: indicate Bluetooth® is connected.
5. Turn on your source signal(s) and adjust the volume on the source signal for
normal operation.
6. On the Input Select Knob, select location of audio source.
*When using USB Input, turn select knob to Bluetooth®.
Bluetooth® and USB source will not simultaneously play at the same time. If
both sources are sending signals, only Bluetooth® audio will take precedence.
7. Connect your headphone to Headphone Jack( ) in the front of the unit.
8. Adjust the Volume to a comfortable level and enjoy!
PRE-AMP QUICK START
1. Follow steps 1-6 on Headphone Quick Start.
2. Using a 1/8” auxiliary cord, connect the audio output to the Pre-Amp Output jack
that is located on the back panel of the unit.
3. Adjust the Volume to a comfortable level and enjoy!
Power LED: BLUE Indicates unit is ON
Output Controls
Headphone Knob- Controls the volume of the headphones.
Pre-Amp Knob- Control the Volume of the Pre-Amp output.
Input Select Knob- Controls which input you want to use for output.
Inputs
RCA Left/Right
XLR Left/RIght
Aux
Bluetooth
Outputs
Charge Only USB
Pre-Amp
Headphone
Bluetooth Controls
Next- Play next track.
Back- Play previous track.
Vol+ - Increase volume.
Vol- - Decrease volume.
Mode- Play/Pause and discover.
Pre-Amp
Output
Headphone Level
Input Select
Mute
RCA BAL
Aux
Pre-Amp Output Level
HP3000 Tube Hybrid Headphone Amplifier
Aux
Input
E L I T E A C O U S T I C S
E L I T E A C O U S T I C S
WARRANTY
Elite Acoustics Designs Inc. warrants this product to be free of defects in material and workmanship for a
period of 90 days from the date of original retail purchase. This warranty is enforceable only by the original
retail purchaser. To be protected by this warranty, the purchaser must complete and return the enclosed
warranty card within 14 days of purchase. During the warranty period EAD shall, as its sole and absolute option,
either repair or replace, free of charge, any product that proves to be defective on inspection by EAD or its
authorized service representative. To obtain warranty service, contact Elite Acoustics Technical Support via email:
TO AN ELITE ACOUSTICS DESIGN SERVICE CENTER. All inquires must be accompanied by a description of
the problem. All authorized returns must be sent to the EAD repair facility postage prepaid, insured and properly
packaged. EAD reserves the right to update any unit returned for repair. EAD reserves the right to change or
improve the design of the product at any time without prior notice. This warranty does not cover claims for damage
due to abuse, neglect, alteration, or attempted repair by unauthorized personnel and is limited to failures arising
during normal use that are due to defects in material or workmanship in the product. Any implied warranties,
including implied warranties of merchantability and tness for a particular purpose, are limited in duration to the
length of this limited warranty. Some states do not allow limitations on how long an implied warranty lasts, so the
above limitation may not apply to you. In no event will EAD be liable for incidental, consequential, or other damages
resulting from the breach of any express or implied warranty, including among other things, damage to property,
damage based on inconvenience or on loss of use of the product, and, to the extent permitted by law, damages
for personal injury. Some states do not allow the exclusion of limitation of incidental or consequential damages,
so the above limitation or exclusion may not apply to you. This warranty gives you specic legal rights, and you
may also have other rights, which vary from state to state. This warranty only applies to products sold and used in
the United States of America. For warranty information in all other countries please refer to your local distributor.
©Elite Acoustics Designs Inc.
For a copy of the complete User’s Manual, please visit: www.eliteacoustics.com
• Input impedance: 47k-100k Ohms
• Output impedance: 8-600 Ohms
• Max Input Level: +24 dBu
• Frequency Response: 10Hz-300kHz +/- 1 dB
• SNR (Typical): 100 dB
• Max Gain: 35 dB
• Distortion: 0.5%
• Tube: (2) 12AU7
• Tube Operation Voltage: 120VDC
• Weight: 2 lbs.
• Dimensions: 5.88”L x 5.25”W x 2.5”H
Table of contents
