Eagle A223915 User manual

PAR #A223915
Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2009 by the Eagle Group
• 100 Industr al Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com
• Phone: [phone] • (Foodserv ce) 800/441-8440 • (MHC/Reta l) 800/637-5100
• Fax: [phone]
EG10038 Revised 06/09
CAUTION
INSPEC CON EN S IMMEDIA ELY AND FILE CLAIM WI H DELIVERING CARRIER FOR ANY DAMAGE.
SAVE YOUR BOX AND ALL PACKING MATERIALS.
YOU ARE RESPONSIBLE FOR DAMAGE O YOUR UNI IF RE URNED IMPROPERLY PACKED.
(continued on page 2)
ASSEMBLY INSTRUCTIONS
Sandwich Prep Station
Sl de collar of frame
support over post
and down onto
spl t sleeves.
Repeat w th
rema n ng 18˝ post.
IMPORTANT: Do NOT
assemble top frame
supports to posts yet.
Step 1 - Assemble bottom frame supports to 18˝ posts.
Snap spl t sleeves onto posts at des red he ght.
• The w der part of the taper goes toward the bottom.
• Make sure r b on spl t sleeve s seated nto a groove on the post.
split
sleeve
collar
3-sided
channel
frame
frame support/
post assembly
frame
support/
post
assembly
split
sleeve
18 post
74 post
(rear)
74 post
(front)
split
sleeve
74 post
74 posts
3-sided
channel
frame
18 post
bottom frame
support
split sleeve
split
sleeve
split
sleeve
split
sleeve
Step 2 - Attach assemblies to two of
the four 74˝ posts.
74
post
Step 3 - Attach 3-sided channel frame to 74˝ posts.

ASSEMBLY INSTRUCTIONS
Sandwich Prep Station
2
Step 7 - Repeat Step 6 to install next shelf.
Step 5 - Attach bottom grid panel clamps.
3-sided
channel
frame
split
sleeve
wire
shelf
18
post
74 post
(front)
74 post
split sleeve
grid panel clamp
top frame
support
split
sleeves
74 posts
top frame
supports
wire
shelf
split
sleeve
Step 4 - Attach top frame supports.
split
sleeve
split
sleeve
Step 6 - Attach bottommost shelf.
(continued on page 3)

ASSEMBLY INSTRUCTIONS
Sandwich Prep Station
3
Step 8 - Repeat Step 5 to attach top grid panel clamps.
grid panel
clamps
(bottom)
74 post
split sleeve
grid panel clamp
split
sleeve
split
sleeve
top wire
shelf
wire shelf
split
sleeve
Step - Repeat Step 6 to install remaining wire shelf.
(continued on back page)

ASSEMBLY INSTRUCTIONS
Sandwich Prep Station
Eagle Foodservice Equipment, Eagle MHC, SpecFAB®, and Retail Display are divisions of Eagle Group. ©2009 by the Eagle Group
• 100 Industr al Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com
• Phone: [phone] • (Foodserv ce) 800/441-8440 • (MHC/Reta l) 800/637-5100
• Fax: [phone]
Assembly s complete. (End)
Step 10 - Attach wall mat to grid panel clamps.
Step 11 - Hang wire basket and snap plastic bin holder onto wall mat.
wall
mat
grid
panel
clamp
plastic
bin
holder
wire
basket
Step 12: Level unit as necessary.
The level ng bolts allow approx mately
1/2˝ adjustment.
leveling
foot
post