Eagle Gowning Racks with Hanger Tube User manual

Parts List
Gowning Racks
with Hanger Tube
PART #A214427
EG10003 Revised 03/05
#qty part # description
*Width and length of shelf determine part number.
** Type of finish determines part number.
*** Width and length of H-frame determine part number.
#1 1 * Wire Shelf
#2 4 ** Post
#3 1 203904 Post for Hanger
#4 4204112 Washer for Hanger
#5 2 203902 Wire Hanger Frame
#6 8PLASTIC SPLIT SLEEVES Split Sleeve
#7 2 A201680 Bolt for Hanger
#8 1 *** H-frame
Eagle Foodservice Equipment, Eagle MHC, SpecFAB, and Retail Display are divisions of Eagle Group. ©2005 by the Eagle Group
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com
• Phone: [phone] • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100
• Fax: [phone] or 302/653-3036
post
#8
#3
#1
#4
#5
#7
#6
Note: The wider part of
the split sleeve is
the bottom.
Step 2
Assemble posts to
H-frame.
To install top shelf,
repeat Steps 1 and 2.
#2
split
sleeve
H-frame
collar
post
ASSEMBLY INSTRUCTIONS
Step 1
Snap the plastic split sleeves
onto each post at the desired
location of the H-frame.
split sleeves
CAUTION
INSPECT CONTENTS IMMEDIATELY AND FILE CLAIM WITH DELIVERING CARRIER FOR ANY DAMAGE.
SAVE YOUR BOX AND ALL PACKING MATERIALS.
YOU ARE RESPONSIBLE FOR DAMAGE TO YOUR UNIT IF RETURNED IMPROPERLY PACKED.

Eagle Foodservice Equipment, Eagle MHC, SpecFAB, and Retail Display are divisions of Eagle Group.©2005 by the Eagle Group
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com
• Phone: [phone] • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100
• Fax: [phone] or 302/653-3036
Step 3
Assemble hanger.
wire hanger frame
#203904 post
for hanger
#204112
washers
#A201680
bolt
Step 4
Attach hanger assembly to underside of top shelf.
Assembly is complete.
wire shelf
hanger
assembly
top
shelf
Gowning Racks
with Hanger Tube
ASSEMBLY INSTRUCTIONS