Eagletone Compact E-touch User manual
www.eagletone.com
electronic drum
user’s manual
Congratulations!
Thank you for purchasing this digital drum set. The drum set
has been Developed to act and play like a drum set but with
greater ease. Before you use the instrument, we recommend
you to read through this manual.
Safety Precautions
WARNING!
m RISK OF ELECTRIC CHOC c
DO NOT OPEN
c The lightning flash with arrowhead symbol within
an equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product s enclosure that may be of suffi-
cient magnitude to constitute a risk of electric shock
to persons.
m The exclamation point within an equilateral trian-
gle is intended to alert the user to the presence of
important operating and maintenance(servicing)
instructions in the literature accompanying the
product.
Taking care of Your Digital Drum Set
LOCATION
Do not expose the unit to the following conditions to avoid defor-
mation, discoloration or more serious damage:
• Direct sunlight.
• High temperature (near a heat)source, or in car during the
day time).
• Disconnect all cables before moving.
POWER SUPPLY
• Make sure to use the suitable AC adaptor and also make
sure the ac outlet voltage at your country matches the input
voltage specified on the AC adapter’s label.
• Turn the power switch OFF When the Instrument is not in use.
• An AC adaptor should be unplugged from the AC outlet if the
instrument is not be used for an extended period of time.
• Unplug the AC adaptor during electric storms.
• Avoid plugging the AC adaptor into the same AC outlet as
appliance with high power consumption, such as electric
heaters or ovens. Also avoid using multi-plug adaptors since
these can result in reducing the sound quality, operation
errors, and possibly damage.
TURN POWER OFF WHEN MAKINGCONNECTIONS
To avoid damage to the instrument and other devices to which it
is Connected, turn the power switches of all related device OFF
prior to connecting or disconnecting cables.
HANDLING AND TRANSPORT
• Never apply excessive force to the controls, connectors or
other parts of the instrument.
• Always unplug cables by gripping the plug firmly, but not
pulling on the cable.
• Disconnect all cables before moving The instrument.
• Physical shocks caused by dropping, bumping, or placing
heavy objects on the instrument can result in scratches more
serious damage.
CLEANING
• Clean the unit with a dry soft cloth.
• A slightly damp cloth may be used to remove stubborn grime
and dirt.
• Never use cleaners such as alcohol or thinner.
• Avoid placing vinyl object on top of the unit (vinyl can stick to
and discolor the surface).
ELECTRICAL INTERFERENCE
This instrument contains digital circuitry and may cause inter-
ference if placed too close to radio or television receivers. If this
occurs, move the instrument further away from the affected
equipment.
EAGLETONE E-TOUCH ELECTRONIC DRUMS User’s manual english
2
EAGLETONE ELECTRONIC DRUMS VDS500 User’s manual english
UPRECAUTION
CONTENTS
1. Assembly instrucions ........................................................ 1
Inside this package ........................................................................1
Packing information.......................................................................2
2. Assembly ........................................................................... 3
Assemble the drum stand.............................................................3
Assemble the pads ........................................................................5
Assemble the cymbals..................................................................6
Assemble the module ...................................................................7
Assemble the bass drum ..............................................................7
Assemble the pedal and bass drum ............................................8
Connect the pads ...........................................................................8
3. Module function ............................................................... 10
Front panel. ..................................................................................10
Rear panel.....................................................................................11
LED display ...................................................................................12
4. Connect with external devices........................................ 12
Connect with audio system or drum speaker cabinet..............12
Connect with headphone.............................................................13
Connect with MP3 or CD player..................................................13
Connect with PC...........................................................................14
Connect with MIDI keyboard.......................................................14
Power supply ................................................................................14
5. Operation ......................................................................... 15
Power switch ................................................................................15
Adjust the master volume...........................................................15
Select drum kit and reverb .........................................................16
Pad parameter setting.................................................................16
Select pad voice............................................................................16
Adjust pad volume........................................................................17
Pad pan..........................................................................................17
Pad tuning.....................................................................................17
Establish user drum kit...............................................................17
Song setting..................................................................................18
Select song ...................................................................................18
Song playing .................................................................................18
Accompaniment volume..............................................................18
Drum sound of the song ..............................................................19
Song tempo...................................................................................19
Drum sound of the song (percussion)........................................19
Tempo setting and the metronome click...................................19
Tempo............................................................................................19
Metronome ...................................................................................19
6. Record and replay............................................................ 20
Record quickly ..............................................................................20
Play the recorded song................................................................20
7. Set up................................................................................ 20
Trigger sensitivity.........................................................................20
Crosstalk rejection ......................................................................21
Trigger curve ................................................................................21
Save the Set-up ............................................................................22
Local control.................................................................................22
8. Reset setting.................................................................... 23
9. MIDI setting ...................................................................... 23
MIDI connection............................................................................23
Connect with external audio source equipment.......................23
Used as audio source equipment ...............................................23
MIDI list. ........................................................................................24
10. Trouble shooting............................................................ 25
11. Audio source specification............................................. 25
12. Drum kit list ................................................................... 26
13. Voice list ......................................................................... 27
14. GM percussion list ......................................................... 33
15. DEMO SONG list.............................................................. 35
User’s manual english EAGLETONE E-TOUCH ELECTRONIC DRUMS
3
CONTENTS O
1. ASSEMBLY INSTRUCTIONS
Caution!
Watch your fingers when adjusting clamps, they may become pinched resulting in injury.
Be careful around pipe ends, inside the pipe and screw ends, metal shavings, etc. May injure your fingers.
Inside this package
Before assembly, please makde sure that all the items listed below are present:
EAGLETONE E-TOUCH ELECTRONIC DRUMS User’s manual english
4
UASSEMBLY INSTRUCTIONS
PACKAGING INFORMATION
User’s manual english EAGLETONE E-TOUCH ELECTRONIC DRUMS
5
PANEL CONTROLS O
2. ASSEMBLY
Caution
• While adjusting the collar, please take extra care to avoid
injury.
• Set the each part to the correct position.
Assembly steps:
Drum stand assembly
1. Take out the drum stand and loosen the screws of the
collars.
2. Set the three master tube at 1200 angle.
3. Screw down at the collars.
4. Loosen the screws at the collars.
5. Set the L/R cymbal tubes to the proper height.
6. Screw down to fix the cymbal tubes.
7. Loosen the screws at the collars.
8. Adjust the cymbal collars to proper height.
9. Screw down to fix the cymbal tubes.
10. Loosen the screws at the collars.
11. Adjust the hi-hat collars to proper height.
12. Screw down to fix the hi-hat tubes.
13. Loosen the butterfly nuts.
14. Adjust the cymbal rod to proper height and angle.
15. Tighten the butterfly nuts.
16. Loosen the screws at the collars.
17. Adjust the U stand of snare to proper position.
18. Screw down.
19. Loosen the screws at the collars.
EAGLETONE E-TOUCH ELECTRONIC DRUMS User’s manual english
6
UCONNECTORS / GETTING READY TO PLAY THE DRUMS
20. Set the module stand to proper position.
21. Screw down.
22. Adjust the balance of the drum stand.
23. Tighten all the screws at the collars. Tighten the clip screw.
Assemble the pads
1. Take out the pads ( 3 tom and 1 snare) . Loosen the square
screw.
2. Assemble the pads onto the tubes and adjust the position.
3. Tighten the square screw.
Assemble the cymbals
1. Loosen the butterfly nut on the left side of the Hi-Hat.
2. Assemble the Hi-Hat cymbal.
3. Tighten the butterfly nut (Note: don’t overtighten)
4. Loosen the butterfly nut on the cymbal rod.
5. Assemble the Crash/Ride cymbal onto the rod.
6. Tighten the butterfly nut (Note: don’t overtighten)
Assemble the module
1. Loosen the square screws of the module.
2. Assemble the module onto the module stand.
3. Screw down.
Tighten the square screw.
Assemble the bass drum
1. Take out the bass drum and bass drum stand
2. Loosen the square screw of the bass drum
3. Assemble the bass drum on the stand
4. Tighten the square screw.
User’s manual english EAGLETONE E-TOUCH ELECTRONIC DRUMS
7
GETTING READY TO PLAY THE DRUMS O
5. Fix the support bar to the pedal.
6. Fix the bass drum stand the hammer, and tighten the screw
7. Loosen the square screw of the hammer
8. Tighten the square screw to fix the hammer
Assemble the pedal and the bass drum
1. Put the pedal to the left floor.
2. Put the bass drum (with hammer) to the right floor.
EAGLETONE E-TOUCH ELECTRONIC DRUMS User’s manual english
8
UGETTING READY TO PLAY THE DRUMS
Connect the pads
1. Use the cable to connect the D-SUB connector of the module and the pad.
2. Use the cable tie to tie the cable ( 12 ties)
ride crash
tom 2 tom 1
tom 3
hi-hat cymbal
snare
module
cable tie
(12 totally)
bass
hi-hat control
User’s manual english EAGLETONE E-TOUCH ELECTRONIC DRUMS
9
GETTING READY TO PLAY THE DRUMS O
3. MODULE FUNCTION
Front panel
219 1
11
12
14
15
16
13
10
9
7
6
5
4
8
1 DATA+
Adjusts the parameters, e.g. drum kit, Voice, etc. (holding the
button to change value quickly)
2 LED DISPLAY
Displays the menu parameters.
3 TEMPO+
Enter into the tempo setting (holding the button to change value
quickly}.
4 MASTER VOLUME+
Adjusts the volume of earphone and line output.
5 PHONE
Stereo phone output connector.
6 KIT REV ON/OFF
Drum kit selection and reverb effect on/off.
7 SONG
Selects DEMO SONG quickly.
8 VOLUME
Adjusts the accompaniment volume and percussion volume.
9 DRUM OFF
Turns on/off the drum sound of DEMO SONG.
10 SAVE
Sets the drum kit and save to the user drum kit, or save the trig-
ger in practical setting.
11 START/STOP
Starts/stops the instrument playing or the recording play-
ing. Press once to start the Demo song playing, twice to start
recording playing, a third time to stop.
12 SETUP
Practical setting button.
13 RECORD
Records the drum sound.
14 VOICE VOL/PAN/TUN
Sets up the voice, volume, pan and tune.
15 CLICK
Turns on/off the metronome.
16 ON/OFF
It turns on/off the power supply.
Rear panel
17 18 19 20 21 22
17 DCIN
Power adaptor connector, 9V DC
18 MIDI IN/OUT PORT
Connects with external MIDI devices (The drum MIDI signal
outputs via MIDI OUT to external audio source. The external
MIDI signal inputs to the drum via MIDI IN.)
19 USB INTERFACE
Connects with PC to deliver MIDI signal.
20 TRIGGER IN CONNECTOR
Pad signal input connector.
21 AUXIN
External stereo input connector, e.g. MP3 or CD player.
22 OUTPUT L/MONO R
The stereo output connector to connect with audio system or
drum amp, L/R stereo output and L/mono output
LED Display
Drum kit LED lights up: the number means the drum kit number
Tone LED lights up: the number means the voice number.
The preset song LED lights up: the number means the preset
song number.
EAGLETONE E-TOUCH ELECTRONIC DRUMS User’s manual english
10
UGETTING READY TO PLAY THE DRUMS
4 CONNECT WITH EXTERNAL DEVICES
Connecting with audio system or drum speaker cabinet
Connect one end with L/mono R, and the other end with audio
system or drum amplifier such as EDA series.
Note:
1. L/mono is only for the left channel output.
2. When connecting with stereo devices, it needs to connect
L/mono and R connectors. The volume is controlled by the
module volume knob and device volume knob.
Connect with headphones
Connect the phone with ⅛" stereo connector on the module The
volume is controlled by the volume knob on the module.
Connect with MP3 or CD player
Connect the output of MP3 or CD player with the AUX IN connec-
tor of the module. The input signal can be mixed with the drum
signal. User can strike the pad according to the metronome
click of input signal.
Connect with PC
• Connect PC via USB. Receives and delivers MIDI signal.
• Connect PC via MIDI port
MIDI IN: receives external MIDI signal.
MIDI OUT: delivers pad signal to external MIDI device or PC.
Connect with MIDI keyboard
MIDI port: connect with the MIDI OUT connector of MIDI
keyboard or external pads as the external audio source to
control this digital drum.
Power supply
1. Turn off the module power switch.
2. Connect the power supply with DC IN connector.
3. Confirm all the pads are correctly connected. Set the
module volume to minimum, then turn on the power switch
of the module. The display lights up and it enters into the
drum kit menu.
Turn off the power switch before connecting with other devices.
5. OPERATION
Power switch
1. Confirm all the cables are connected well, then set the
module volume to minimum, then turn on the power switch.
2. When the display lights up, enter into the module menu
operation (enter into the drum kit menu when on.
Adjust the master volume
Strike the pads and adjust the volume knob for proper master
volume.
Select drum kit and reverb
1. Press [KIT REV ON/OFF] key to enter into drum kit setting
or to switch drum kit and reverb effect.
User’s manual english EAGLETONE E-TOUCH ELECTRONIC DRUMS
11
GETTING READY TO PLAY THE DRUMS / FACTORY SETTINGS O
KITREV
2. Press [KIT REV ON/OFF] key to enter into drum selection.
The display shows drum kit number and the KIT LED lights
up. Use [-DATA+] button to select drum kit.
Preset drum kit: KIT01---20
User drum kit: USER01---10
3. Press [KIT REV ON/OFF] button to enter into reverb setting.
LED shows the reverb effect. Use [-DATA+] button to switch
the reverb effect (use the reverb effect to make the sound
fuller)
Pad parameter setting
Press [VOICE VOL/PAN/TUN] key to enter into the pad param-
eter setting and then enter into voice, level, pan, tuning.
VOICE LEVELPANTUNING
Select pad voice
Voice: the module has 250 voices. Please refer to the voice list.
1. Press [VOICE VOL/PAN/TUN] button for the first time to
enter into voice setting. The display shows the current pad
voice and the voice LED lights up.
2. Strike the pad of which voice to be changed. Use [-DATA+]
button to select the voice (voice Number:001-250” non-
recycle)
Adjust pad volume
1. When adjusting the pad volume, press once again [VOICE
VOL/PAN/TUN] button to enter Into pad volume setting.
The first LED shows r LJ , and the other two LED shows the
volume Value. VOICE LED lights up.
2. Strike the pad of which volume to be changed. Use [-DATA+]
button to select the volume (00-32 non recycle).
Pad pan
1. Press [VOICE VOL/PAN/TUN] button continuously to enter
into the pan setting. The display displays letter “P” first and
then the pan value. The VOICE LED lights up.
2. Strike the pad of which the pan to be adjusted. Use [-DATA+]
button to adjust the pad pan C ±8, non-recycle)
Pad tuning
This function is used for tuning the pad
1. Press [VOICE VOL/PAN/TUN] button continuously to enter
into pad tuning. The display displays letter “t” , and then the
tuning value. VOICE LED lights up.
2. Strike the pad to be tuned. Use [-DATA+] button to adjust
pad tuning C ± 2 , non-recycle)
Establish user drum kit
In the drum kit menu, user can select the preset drum kit to
play, or user can select the pad voice and relative parameters,
e.g. voice, volume, UR pan, tuning.
This module has 30 drum kits:
Preset drum kits: KIT01---20
User drum kits: USER01---10
1. In the drum kit menu, press [SAVE] button to enter into user
drum kit setting. Use [-DATA+] button to select the user
drum kit C U01-U 1 O” non-cycle) . During this process, the
drum kit number flashes.
2. Press the pad parameter setting to change the pad tone/
volume/pan/tune.
3. Press [SAVE] button once again to save the drum kit setting,
and the former drum kits will be covered by the new drum
kit. The drum kit number stops flashing.
Note: if the drum kit number has been changed or the power
fails before saving, the former drum kit parameters will be lost.
Song setting
Select song
1. Press [SONG] button to enter into song setting. The display
EAGLETONE E-TOUCH ELECTRONIC DRUMS User’s manual english
12
UVOICE LIST
shows the song number. SONG LED flashes once and then
lights off.
2. Use [–DATA+] button to select the current song number
(1-20, non-recycle)
Song playing
1. Press [START/STOP] button to play the selected song.
During playing, change the song via [-DATA+] button.
2. After playing it stops automatically; during playing, press
[START/STOP] button two times to stop playing. ( Note:
during playing, press [START/STOP] button one time to
switch to play the recorded songs.)
Note: during playing, user can send real time MIDI signal via
MIDI OUT.
Accompaniment volume
During playing, user can adjust the volume of accompaniment
and of the drum sound.
1. Press [ACCOMP VOLUME] button to enter into accompani-
ment volume setting. The display shows letter “A” first, and
the accompaniment volume value next. SONG LED lights
up.
2. Use [-DATA+] button to adjust the accompaniment volume (
0-32, non-recycle) .
Drum sound volume of the song
1. Press [ACCOMP VOLUME] button continuously to enter into
the drum sound setting. The display shows letter “d” first,
and the drum sound volume next. SONG LED lights up.
2. Use [-DATA+] button to adjust the drum sound volume of the
song C 0-32, non-recycle)
Song tempo
During playing DEMO SONG, use [-TEMPO+] button to adjust
the song tempo.
Drum sound of the song (percussion)
Press [DRUM OFF] button to start/close the drum sound func-
tion. If “DRUM OFF” starts, the drum sound will be closed and
“DRUM OFF” LED lights on.
Tempo setting and the metronome click
TEMPO
1. Press [-TEMPO+] button to enter into the tempo setting to
change the metronome click and song tempo C 35-280,
non-recycle) .
2. If the tempo has not been changed in 2 seconds, the module
will return back to the former menu automatically.
METRONOME
1. Press [CLICK] button to start/close the metronome voice.
This module has two metronome voices: triangle and click.
When the metronome starts, it offers the triangle voice.
Press [CLICK] button twice it switches to click voice.
2. When the metronome counts the beats, the beats (2/4, 3/4,
4/4, 5/4, 6/8) is shown on The display. Use [-DATA+] button
to change the beats (recycle).
3. Use the master volume knob to change the metronome
volume.
Note: during playing the songs, the metronome is closed. Press
[CLICK] button to start metronome function.
6. RECORD AND RE PLAY
Record quickly
1. Press [RECORD] button, and [RECORD] LED lights up and
flashes. It shows “REC” .
2. Strike the pads to start recording or record only the drum
sound of the song being played.
3. Press [RECORD] button to stop recording. [RECORD] LED
lights off. The song or the user’s performance has been
recorded.
User’s manual english EAGLETONE E-TOUCH ELECTRONIC DRUMS
13
DRUM KITS LIST / STYLE LIST O
Note:
• During recording, the metronome function will not automa-
tically start. If user needs to start the metronome function,
user can press [CLICK] button before recording instead of
pressing it after recording.
• The metronome sound can not be recorded.
• If user is not satisfied with the recorded result, press
[RECORD] to restart recording.
(Note: this module supports the recording function, but not
saving function. The recorded data will cover the former data,
and all the data will not be saved after the module is powered
off).
Play the recorded song
1. Press [START/STOP] button twice to replay the recorded
song, and meanwhile [START/STOP] button and [RECORD]
LED lights up.
2. After replaying, [UTILITY] button and [RECORD] LED lights
off.
7. SET UP
Press [UTILITY] button to enter into practical setting, then into
the following menu gradually.
((Sensitivity Crosstalk Curve Local On/off))
Trigger sensitivity
1. Press [UTILITY] button to enter into the trigger sensitivity
setting. The display shows letter [E] first, and the sensitivity
level next.
2. Strike the pads to select proper sensitivity.
3. Use [-DATA+] button to adjust the trigger sensitivity (01-08,
non-recycle) . The higher the value means higher sensitiv-
ity.
Crosstalk rejection
Strike a pad (trigger) and the vibration may cause crosstalk.
1. Press [SET UP] button continuously to enter into trigger
sensitivity setting. The display shows letter [O] first and the
crosstalk rejection level next.
2. Use [-DATA+] button to adjust the trigger sensitivity rejec-
tion level C 01-16,non-recycle) The higher value means
higher rejection level.
Trigger curve
1. Press [SET UP] button continuously to enter into trigger
curve setting. The display shows letter “CU” first and the
trigger curve number next.
2. Use [-DATA+] button to select the trigger curve C 1-6,non-
recycle). This will change the relation between force and
the loudness.
• CURVE 1: Small dynamic response. Select this curve and it
delivers high but stable volume.
• CURVE2: The standard setting to deliver natural signal.
• CURVE3: Compared to CURVE2, low striking force causes big
volume change.
• CURVE4: Compared to CURVE2, comparatively high striking
force causes comparatively big volume change.
• CURVES: Compared to CURVE2, comparatively high striking
force causes very big volume change.
• CURVE6: The striking force causes extreme volume change.
((CURVE1 - CURVE2 - CURVE3 - CURVE4 - CURVE5 - CURVE6))
Save the set-up
Press [SAVE] button to save the 3 setting mentioned above:
sensitivity/crosstalk rejection/striking force.
Local control
Press [SET UP] button to enter into the local setting. It shows
the local control status:
“Lon” for ON or “Lof” for O F F. Use [-DATA+] button to switch.
Refer to the following figure for the local control setting :
Local control: used to control the connection of trigger detec-
tion and the audio source sequencer. In the default ON status,
the two modules are connected. Striking the pad will generate
EAGLETONE E-TOUCH ELECTRONIC DRUMS User’s manual english
14
UMIDI IMPLEMENTATION CHART
sound and it outputs the relative MIDI signal. When this function
is turned off, the audio source module will not be controlled by
the trigger directly, but will controlled by the MIDI input signal.
8. RESET SETTING
Hold [TEMPO+] and [SET UP] button at the same time. It reset
back to the factory setting:
All user drum kits: voice/volume/pan/tuning
Practical setting: sensitivity/crosstalk, rejection/striking force
curve
9. MIDI SETTING
This equipment is compatible with various MIDI devices and can
be used as trigger device or audio source. It is also compat-
ible with part of GM standard, and can be used with many audio
sequencer softwares together.
MIDI connection
MIDI IN : receives the external MIDI signal when connecting
with external MIDI devices.
MIDI OUT: sends the external MIDI signal when connecting with
external MIDI devices.
USB: the standard USB2.0 interface can be connected with
standard USB MIDI device or PC. The operation system has its
driver without the need of repeated installation. It is compat-
ible with computer system, e.g. XP, Win7, Vista, Mac OSX . After
connection, the system recognizes this equipment as USB
COMPOSIT E DEVICE. (USB is only used when connected with
MIDI devices)
Note : when USB is connected with PC, all MIDI data can be sent
or received via USB.
Connect with external audio source equipment
This equipment can send its various information via channel 10,
including: trigger notes, force, hi-hat pedal performance and
status, etc.
(Note: the song replaying and metronome information can not
be sent)
Use the external aud io sequencer to record the performance
1. Connect external audio sequencer or PC via MIDI OUT or
USB.
2. Set the equipment of channel 10 in the audio sequencer or in
the sequence software, and then start record ing.
3. Play the pads.
4. Stop the performance and record ing, and listen to the
performance.
Used as audio source equipment
When connecting with external MIDI keyboard or aud io
sequencer via MIDI OUT or USB cable, it receives its MIDI
output signal. At this time this equipment can play the effective
signals. The output voice changes as the drum kit is switched.
This equipment has most of the GM voices. User can establish
user drum kits. Refer to MIDI List for MIDI information.
User’s manual english EAGLETONE E-TOUCH ELECTRONIC DRUMS
15
SPECIFICATIONS O
MIDI IMPLEMENTATION CHART
FUNCTION TRANSMITIED RECOGNIZED REMARKS
Basic Default 10 Ch 1-16
Channel : Changed
: Default
X X
X X
Mode : Massages
: Altered
X X
X X
Note ********** 0-127
Number : True Voice ********** 0-127
Velocity : Note On O O
99H, V= 1-127
Note Off X O
After : Key’s X X
Touch : Ch’s X X
Pitch Bend
Control 0 X X Bank Select
Change 1 X X Modulation
5 X X Portamento Time
6 X O Data entry
7 X O Volume
10 X O Pan
11 X X Expression
64 OSustain Pedal
65 X X Portamento On/Off
66 X X Sostenuto Pedal
67 X X Soft Pedal
80 X X Reverb Program
81 X X Chorus Program
91 X X Reverb Level
93 X X Chorus Level
120 X O All Sound Off
121 X O Reset All Controllers
123 X O All Notes Off
Program X X
Change : True Number X X
System Exclusive X X
System : Song Position X X
Common : Song Select
: Tune
X X
X X
Svstem: : Clock O X
Real : Comands O X Start And Stop Only
Time
Aux : Local On/Off
: All Notes Off
X O
X X
Message : Active Sensing
: Reset
X X
X X
EAGLETONE E-TOUCH ELECTRONIC DRUMS User’s manual english
16
10. TROUBLE SHOOTING
Problem ..................................... Reason
No sound ................................... Please confirm the volume knob is not turned off
Pad has no sound ..................... 1. confirm the pad connection is correct.
..................................................... 2. confirm the pad volume is not set to 0
Metronome has no sound ........ Confirm the metronome volume is not set to 0
DEMO SONG has no sound ...... Confirm the DEMO SONG volume is not set to 0
11 . AUDIO SOURCE SPECIFICATION
Max polyphony........................... 32
Drum kits ................................... 20 preset drum kits: KIT01--20
15 user drum kits ...................... USER01--15
Voice ........................................... 250 voices (DRUMS, PERCUSSION, SFX)
Effect .......................................... the reverb switch
Audio sequencer........................ DEMO SONG 20
Recording................................... real time recording, but can not be saved.
Tempo......................................... 035---280
Display........................................ red or green
Connection................................. Phone stereo out connector (⅛"), AUX IN stereo connector (⅛"),
..................................................... Audio output connector (¼" L/mono R),
..................................................... USB,MIDI IN/MIDI OUT
Power supply ............................. DC 5V inner+ outer -
Dimension LxWxH..................... 244×195×72mm
Weight......................................... 0.5kg
The specification is subject to change without prior notice.
User’s manual english EAGLETONE E-TOUCH ELECTRONIC DRUMS
17
12. DRUMKITLIST
N° PRESET DRUM KIT N° USER DRUM KIT
1 POP1 1 POP1
2 POP2 2 ROCK1
3 POP3 3 JAZZ1
4 ROCK1 4 LATIN1
5 ROCK2 5 DANCE1
6 ROCK3 6 EAST1
7 FUNK1 7 FUNK1
8 FUNK2 8 FUNK2
9 LATIN1 9 FUNK3
10 LATIN2 10 LATIN
11 BOSSA
12 JAZZ1
13 JAZZ2
14 BRUSH
15 ORCH
16 DANCE1
17 DANCE2
18 EAST1
19 EAST2
20 PERCUSSION
EAGLETONE E-TOUCH ELECTRONIC DRUMS User’s manual english
18
13. VOICELIST
VOICE N° NAME
KICK 1 KICK 1
2 KICK2
3 KICK3
4 KICK4
5 LTBD1
6 POPKICK1
7 POPKICK2
8 POPKICK3
9 POPKICK4
10 POPKICK5
11 POPKICK6
12 POPKICK7
13 ACKICK
14 SYNBD02
15 EKICK05
16 JAZZBD
17 EKICK01
18 EKICK02
ACOUSTIC SNARE 19 BRSHSN1
20 FNKSN1
21 FNKSN2
22 POPSN1
23 HRDBT1
24 JZSLP
25 REVSN
26 ORCHSN3
27 SDSTK3
28 SNRIM
29 HVSN
30 TITES N1
31 TITESN2
32 TITESN3
33 POPSN2
34 TITESN4
35 TITESN5
36 TRDSN1
37 SNCOMBO3
38 SNCOMBO4
39 SNCOMBO5
40 SNCOMBO6
41 SRSTD
42 SRIMC4
43 POPSN1
44 POPSN2
VOICE N° NAME
45 POPSN3
46 POPSN4
47 POPSN5
48 POPSN5
ELECTRIC SNARE 49 SYNSN01
50 ESN11
51 ESN1
52 ESN2
53 ESN3
54 ESN4
55 ESN5
56 ESN6
57 ESN7
HI-HAT 58 CHH1
59 CHH2
60 CHH3
61 CHH4
62 CHH5
63 CHH6
64 CHH7
65 CHH8
66 LOOSHH1
67 LOOSHH2
68 LOOSHH3
69 LOOSHH4
70 OHHSTD
71 OHIHAT1
72 OHIHAT2
73 OHIHAT3
74 OHIHAT4
75 OHIHAT5
76 PHHJZ
77 PHH2
78 PHH3
79 CHHPOP1
80 CHHPOP2
81 CHHPOP3
82 CHHPOP4
EHH 83 EHH01
84 EHH02
85 EHH03
86 EHH04
87 EHH0S
88 EHH06
89 EHH07
TOM 90 BRSHT1
User’s manual english EAGLETONE E-TOUCH ELECTRONIC DRUMS
19
VOICE N° NAME
91 BRSHT2
92 BRSHT3
93 TOM1
94 TOM2
95 TOM3
96 TOM4
97 TOMS
98 TOM6
99 TOM?
100 TOMB
101 TOM9
102 TOMHSTD
103 TOMMSTD
104 TOMPOP1
105 TOMPOP2
106 TOMPOP3
107 TOMPOP4
108 TOMPOPS
109 TOMPOP6
110 808T1
111 808T2
112 808T3
113 ETOM0S
CYMBAL 114 CRASH1
115 CRASH9
116 CRSHJS1
117 CRSHJS2
118 CRSHSTD1
119 CRSHSTD2
120 LTCRSH1
121 LTCRSH2
122 LTCRSH3
123 ORCCYM1
124 ORCCYM2
125 CRASH18
126 JAZZRD
127 RBLLSTD
128 RIDEBELL
129 REVCYM1
130 REVCYM2
131 REVCYM3
132 REVCYM4
133 RIDEJZ1
134 RIDEJZ2
135 RIDESTD
VOICE N° NAME
136 RIDE1
137 RIDE2
138 REV CYMBAL
139 SPLSH1
140 SPLSH2
141 CRASHC1
142 CNCYMBAL
143 CRASHPOP1
144 CRASHPOP2
145 CRASHPOP3
146 CRASHPOP4
147 SPLASHC
148 RIDELC2
149 RIDEH1
150 RIDEH2
151 ECRASH1
152 ECRASH2
153 ECRASH3
154 ECRASH4
155 SPLASH
PERCUSSION 156 EMRCA1
157 EMTRI
158 ETRNGL1
159 ETRNGL2
160 EBELL 1
161 ECBSA2
162 ETMBRIN1
163 ETMBRIN2
164 CABASA1
165 CABASA2
166 CHKR01
167 CHKR02
168 CHKR03
169 CLAP1
170 CLAP2
171 CLAP3
172 CLAP4
173 COWBLL1
174 COWBL2
175 COWBLL13
176 COWBLL14
177 COWBLL15
178 HAGOGO1
179 HAGOGO2
180 HAGOGO3
EAGLETONE E-TOUCH ELECTRONIC DRUMS User’s manual english
20
Table of contents
