EarthQuake Q10B User manual

Q10B MQB-1
The Sound That Will Move You
Earthquake
Tactile Transducers
Installation Manual
www. sound.comearthquake

®
Earthquake Tactile Transducers Basic Information
By now, you may have some knowledge about Tactile
Transducers. To help clarify this application further, please
read on:
Specifications are subject to change without notice
2
What is a Tactile Transducer?
A tactile transducer or "bass shaker" is a device which is made on
the principle that low bass frequencies can be felt as well as heard.
A shaker transmits low-frequency vibrations into various surfaces
so that they can be felt by people. This is called tactile sound.
Tactile transducers may augment or in some cases, substitute for
a subwoofer.
Tactile transducers may be used in a home theater, a commercial
movie theater, or for special effects in an arcade game,
amusement park ride or other application.
In Home Theater and Music Applications:
A surround sound audio system complements a video action
movie by responding to the events that are unfolding on the
screen. The surround sound extends from 30 Hz (if you are lucky)
and up to 20Khz. For the most part, it is the low frequency
response that brings you closer to the action. A tactile transducer
system will tap into the low frequency signal that is emanating for
LFE output, which is typically located in the back of your receivers.
This signal is amplified through a resilient power amplifier and then
used to drive the tactile transducer; Thus, picking up and
enhancing everything your subwoofer lacks.
In Gaming Applications:
Tactile transducers are an explosive way to generate massive
vibration, which brings players into the video game. Mounting an
MQB-1 in a gamer seat will lead to an incredible interactive
experience unlike any other.

®
Earthquake Tactile Transducers Basic Information
Patent No: US 7,449,803 B2
US 7,768,160 B1
US 7,859,144 B1
www.earthquakesound.com 3
In Music Applications:
Music recording can be immensely enhanced by allowing
musicians (drummers in particular) who rely on sound and impact
to literally feel their progress while recording. Now, musicians can
rely on tactile transducers to transmit vibrations through their
seats. This vibration allows them to feel the beat more naturally
and confidently synchronize it with others in the band.
Mounting Quake Tactile Transducers
®
The Earthquake Q10B and MQB-1 need to be mounted vertically
at all times. Mounting them vertically maximizes the output and
increases the over all tactile experience.
Horizontally mounting the units will diminish the output and may
damage them over time.
The MQB-1 may be
mounted upside down by
hanging it from its feet.

TRI G GER IN
FUSE: T6.3A L/250V
®
Connecting Earthquake Tactile Transducers
Specifications are subject to change without notice
4
Tools/supplies that will be needed for installation:
16 to 12-gauge speaker cable
a pair of pliers
a powered screw driver
measure tape
two (2) wing nut wire connectors or electrical tape
Connecting 1 MQB-1 to an XJ-300ST amplifier
NOTE: Make sure the amplifier’s front toggle switch is set to “LOWPASS”
prior to connecting the tactile transducers.
Do not wire 1 MQB-1 with the mono bridge setting.
Use either the Left or Right speaker output.
Receiver/Processor - LFE/SUB OUT

TRI G GER IN
FUSE: T6.3A L/250V
TRI G GER IN
FUSE: T6.3A L/250V
®
Connecting Earthquake Tactile Transducers
www.earthquakesound.com 5
Connecting 1 Q10B to an XJ-300ST amplifier
NOTE: Make sure the amplifier’s front toggle switch is set to “LOWPASS”
prior to connecting the tactile transducers.
Receiver/Processor - LFE/SUB OUT
Connecting 2 MQB-1 to an XJ-300ST amplifier
NOTE: Make sure the amplifier’s front toggle switch is set to “LOWPASS”
prior to connecting the tactile transducers.
Receiver/Processor - LFE/SUB OUT

®
Installing/Mounting Earthquake Tactile Transducers
Specifications are subject to change without notice
6
Applications:
Sofas
Theater seats
Recliners
Gaming Chairs
Type of Mounting:
Direct
Multiplier
Internally
Externally
Enhancements To:
Musical Enjoyment
Home Cinema/Theater
Gaming Experience
Recording Studio
Mounting the Q10B to Seating Directly
Mounting the MQB-1 to Seating Directly
MQB-1
Strongest Joist / Brace
in Sofa or Chair
MQB-1
Mounting Bracket
Q10B
Strongest Joist / Brace
in Sofa or Chair
Q10B
Mounting Bracket

®
Installing/Mounting Earthquake Tactile Transducers
7
Mounting the Q10B to a Platform
When designing your custom platform, be sure to allow 1-1/2 to 2 feet of space
around the outer perimeter of the chairs or couch. This much space is not
required in between the chairs.
All platforms should be constructed with no less than 1/2" plywood and built
sturdy for some seriously high speed entertainment. Also, the use of rubber
stabilizers is an excellent way to eliminate rattles and vibrations that may cause
valuables to fall off the walls or shelves. In addition, the rubber feet will provide a
great suspension, allowing the Q10B to really shine.
The optional Platform Mount Multiplier can be installed underneath or inside
couches or chairs as in previous illustrations, but it is more effective when
mounted directly to the platform. Once the Multiplier is mounted to the platform,
you may then move a chair or couch over it for a more plush cosmetic
appearance.
Platform
PB-1: L-Shaped
Mounting Bracket
Platform
www.earthquakesound.com
Typical Two Chair Setup
1 1/2' to 2' Feet
of Space
Chair
One
Q10B
front
back
Top View One Chair
GAMER STYLE

®
Installing/Mounting Earthquake Tactile Transducers
Specifications are subject to change without notice
8
Mounting the MQB-1 to Gaming Chair
Mounting to Office Chair or Throne
Pre-built gaming chairs come in all different shapes and sizes. The illustration to
the right is only a demonstration on how you may install a MQB-1 to this type of
application.
Always be sure that what you are mounting the bracket to is very solid and won't
pierce any pre-existing wiring or damage the chair's upholstery.
In addition, please keep in mind that the MQB-1 is very powerful and will
deteriorate poorly constructed chairs, thrones, etc. You may even need to
modify existing construction.
For rotating office chair or throne, we suggest using
the Shell Shoxx system which includes the MQB-XX
shaker and 300-XX, a matching 300-watt max
amplifier. This gaming set is the ultimate gaming
accessory and brings 3D Motion™ to any set-up.
The MQB-XX is a patented shaker that converts low
frequencies into powerful vibrations. It is optimized to
clamp onto virtually any office chair; however, can be
clamped onto an ordinary chair leg or couch structure
as well. The MQB-XX is powered by our 300-XX, an
amplifier specifically designed for our shaker.
MQB-1
MQB-1
Mounting Bracket
Pre-built Gamer Chair
Strongest,
Mountable Area
(This Will Vary From Chair to Chair)

Frequency Response:
Nominal Impedance:
Power Handling:
15 - 50 Hz
8-Ohm
20 - 500 Watts
3-3/8”
(85mm)
3-1/2”
(88mm)
1/8”
(3mm)
7-3/8”
(187mm)
Q10B
Frequency Response:
Nominal Impedance:
Power Handling:
5 - 40 Hz
8-Ohm
40 - 1000 Watts
3-3/4”
(95mm)
3-15/16”
(100mm)
3/16”
(5mm)
8-1/8”
(207mm)
®
Earthquake Tactile Transducers Specifications
www.earthquakesound.com 9
6-3/16”
(158mm)
5-1/8”
(128mm)
3-9/16”
(90mm)
2-5/16”
(58mm)
3-9/16”
(90mm)
3-1/16”
(77mm)
11”
(280mm)
3-15/16”
(100mm)
3-15/16”
(100mm) 2-1/4”
(58mm)
3-15/16”
(100mm)
1-9/16”
(40mm)
2-1/4”
(57mm)
2-5/8”
(67mm)
3-3/8
(86mm)
2-1/2”
(64mm)
MQB-1
PB-1 Multiplier (Optional - Sold Separately)

Earthquake warrants the original purchaser that all Factory Sealed New
Audio Products be free from defects in material and workmanship, under normal
and proper use, for a period of five (5) years from the date of purchase (as
shown on the original sales receipt with serial number affixed/written on it).
The five (5) years warranty period is valid only if the product is properly
installed by an Earthquake authorized dealer/installer, and the warranty
registration card is properly filled out and sent to Earthquake Sound
Corporation. If the product is installed by a non-authorized dealer/installer, a
ninety (90) days warranty period applies.
(A) Five (5) years limited warranty plan coverage guidelines:
First year: Earthquake pays for labor, parts, and ground freight (only in
US mainland, not including Alaska and Hawaii) back to customer.
Second, third, fourth & fifth year: Earthquake pays labor only. Customer
must pay for parts and freight both ways.
(B) Warning:
Products (sent for repair) that are tested by Earthquake technicians and
deemed to have no problem, will not be covered by the five (5) years limited
warranty. Customer will be charged a minimum of one (1) hour of labor
(ongoing rates) plus shipping charges back to customer.
(C) Earthquake agrees to repair or replace - at our option - all such
defective products/parts subject to the following provisions:
Defective products/parts have not been altered or repaired by other than
an Earthquake factory approved technician.
Products/parts are not subjected to negligence, misuse, improper use,
or accident, damaged by improper line voltage, used with incompatible
products, or have its serial number or any part of it altered, defaced,
removed, or have been used in any way that is contrary to Earthquake's
written instructions.
(D) Warranty Limitations:
Earthquake warranty does not cover products that have been modified
and/or abused, including but not limited to the following:
Damages to speaker cabinet and cabinet finish due to misuse, abuse, or
improper use of cleaning materials/methods.
Bent speaker frame, broken speaker connectors, holes in speaker cone,
surround & dust cap, burnt speaker voice coil.
Fading, deterioration of speaker components & finish due to improper
exposure to elements.
Bent casing, damaged finish on the casing due to abuse, misuse, or
improper use of cleaning material.
Five (5) Year Limited Warranty Guidelines
Specifications are subject to change without notice
10

Five (5) Year Limited Warranty Guidelines
www.earthquakesound.com 11
Product/part damaged due to poor packaging or abusive shipping
conditions.
Subsequent damage to other products.
A warranty claim will not be valid if the warranty registration card is not
properly filled & returned to Earthquake with a copy of the sales receipt.
(E) Service Request:
To receive product(s) service, contact Earthquake Sound’s service
department at [phone] and request an RMA number (Return
Material Authorization), item(s) shipped without a valid RMA number will be
refused. Make sure you provide us with your complete and correct shipping
address, a valid phone number, and a brief description of the problem you
are experiencing with the product. In most cases, our technicians might be
able to resolve the problem over the phone, thus eliminating the need to ship
the product.
(F) Shipping Instructions:
Product(s) must be packaged in its original protective box(es) to minimize
transport damage. Shipper claims regarding item(s) damaged in transit must
be presented to the carrier. Earthquake Sound Corporation reserves the
right to refuse improperly packed product(s). A copy of the original sales
receipt must accompany product(s) returned for service. We encourage you
to include a written description of the problem inside the package. Ship
product to:
Earthquake Sound Corp.
2727 Mc Cone Avenue
Hayward, CA 94545
You are responsible for the cost of shipping the product to Earthquake
Sound Corporation.
(G) Disputes Resolution:
All disputes - between clients and Earthquake Sound Corporation - resulting
from the five (5) years limited warranty policy must be resolved according to
the laws & regulations of the county of Alameda, California.
For Technical Support
E-Mail:
US Toll Free:
[email protected]
1-800-576-7944 (between 9 AM - 5 PM Pacific)

Earthquake Sound reserves the right to amend details of the specifications without notice.
Copyright © Earthquake Sound Corporation
Earthquake Sound Corporation • 2727 McCone Avenue Hayward CA, 94545
Phone: [phone] Fax: [phone]
The Sound That Will Move You