EastPoint 37001 User manual

ITEM# 1-1-37001
EASTPOINT
Assembly Instructions
Model # 37001
www.eastpointsports.com
TWO OR MORE ADULTS REQUIRED FOR ASSEMBLY

IMPORTANT SAFETY INSTRUCTIONS
1. Read all instructions - All the safety and operating instructions should be read carefully before this Hover
Hockey table can be operated or played.
2. Caution - This is nota toy and is intended for use by or under the supervision of adults. Adults should
review safety guidelines with children to avoid possible risk of electric shock or other injuries.
3. Caution - This table rotates on a central axis and can pose a small risk of a pinch hazard. Keep hands
clear when swivel cabinet is in motion.
4. Power Sources - This Hover Hockey game should be operated only from 100-125V A.C., 50/60 cycle current
as indicated on the identification label. If you are not sure of the type of power supply to your home,
consult your appliance dealer or local power company.
5. Power Cord Protection - Power cord should be routed so that it is not likely to be walked on or pinched
by items placed upon or against it. Pay particular attention to cords at plugs, convenience receptacles,
and the point of exit from the game.
6. Overloading - Do not overload wall outlets and extension cords as this can result in a risk of fire or
electric shock.
7. Object and Liquid Entry - Never push objects of any kind into this game through openings as they may
touch dangerous voltage points or short-out parts which could result in a fire or electric shock. Never spill
liquid of any kind on the game. If cleaning the surface, follow the recommended manufacturer instructions
or call technical support for guidance.
8. Ventilation - Openings in the game are provided for the exhaust air to create a cushion/floating effect.
The openings on the air blower are for the intake air. Keep clear of the air blower during operation.
Do not allow hand, hair, or any other objects near the intake openings. To ensure reliable operation of
the game and protect it from overheating, these openings must not be blocked or covered.
9. Damage Requiring Service - Unplug the game from the wall outlet/receptacle. Do not attempt to service
the blower yourself as while opening and/or removing covers may expose you/others to dangerous voltage
or other hazards. Refer servicing to qualified service personnel under the following conditions:
a. When the power supply cord is damaged.
b. If liquid has spilled, or objects have fallen into the blower.
¢. When the air blower exhibits a distinct change in performance — i.e. abnormal noise,
too much/too little air flow, this indicates a need for service
10. Grounding or Polarization - This game is equipped with a polarized alternating current line plug (a plug
having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should
still fail to fit, contact your electrician to replace your obsolete outlet. DO NOT defeat the safety purpose of
the polarized plug.
11. CAUTION - ELECTRICALLY OPERATED PRODUCT - Not recommended for children under 8 years of age.
As with all electrical products, precautions should be observed during handling and use to reduce the
risk of electric shock.
12. We recommend - that the game be periodically examined for conditions that may result in the risk of fire,
electrical shock, or injury to persons. In the event such conditions exist, the game should not be used
until properly repaired.
13. Storage Conditions - This product is made from wood based components and is sensitive to extreme
temperatures and moisture / humidity. Subject to these conditions will effect game play, cosmetics
and longevity.
Save These INSTRUCTIONS
Warnin QO: To Reduce The Risk Of Fire Or Electric Shock, Do Not Use This Fan With Any Solid-State Speed Control Device

IMPORTANT -
Lay out all parts before you begin
Please review the parts identifier and make sure that you have all parts before beginning assembly.
If any questions or issues, please contact us at 1-973-585-4747 BEFORE returning the product to the original place
of purchase.
Please keep your original sales receipt. Staple iton the adjacent page in the space provided for future reference/use.
It will be required to receive service help or parts under warranty.
‘CONTACT INFO
Hours Technical Support or Replacement Parts
_ Monday to Friday Email_us at: [email protected]
(9:00am to 5pm EST) _ Visit us at: www.eastpointsports.com
Call 973-585-4747

BEFORE BUILDING -
Please inspect your playfield
Your Cabinet (holds Billiard table and Hockey Playfield) is NOT replaceable. Any damage that exists to
your playfield is not reparable under warranty. If your playfield is damaged, the entire game must be
returned to the original place of purchase for an exchange.
i i
i i
Please attach
, RECEIPT HERE ,
i i
i i
It will be required to receive service help or parts under warranty.

TOOLS
Required
« 1- Phillips Head Screwdriver « Electric Screwdriver or Power Driver
(Standard Size) — Not Included CAUTION - DO NOT OVER TIGHTEN. Over Tightening
will result in irreparable damage to the product. If using,
please make sure that the tool is set to a very low torque
+ 1- Allen Wrench - Included to prevent damage to the product.
¢ 1-Hex Wrench — Included
« Socket Wrench Set
How to use the: Instructions Parts ID #
PARTS IDENTIFIER , ore
Part Name-~
| - Part Image
Before you begin assembly, please make sure that 1 g
you have all the parts listed and in the correct
quantities. This will ensure the quickest and most
organized assembly.
Part Quantity
Be sure to work on the assembly on a soft -
non-marring surface such as carpet or the inside of
the corrugate box top to prevent causing damage Item #7
to the table surface during assembly.
*s Step Used In
PARTS IDENTIFIER
Components
Leg Panel - Right-A
cc
Leg Panel -Left-A Leg Panel - Left-B
a
# 37001-03S |
FOR USE WITHSTEP #1
#37001-045 L—-
FOR USE WITHSTEP #1
# 37001-02S
FOR USE WITHSTEP #1
Leg Panel - Right - B Leg Cap - Left Leg Cap - Right
es
a
# 37001-05S
FOR USE WITH STEP #1
# 37001-06S
FOR USE WITH STEP #2
# 37001-075
FOR USE WITH STEP #2

Leg Leveler
# 37001-1658
FOR USE WITHSTEP #2
Lock Pin Leg Pedestal
# 37001-17S
FOR USE WITHSTEP #3
# 37001-08S
FOR USE WITHSTEP #3
Ball Catcher Box
# 37001-10S
FOR USE WITH STEP #4
Ball Board - Lower Leg - End Panel
# 37001-09S
FOR USE WITH STEP #4
# 37001-11S
FOR USE WITHSTEP #6
Ball Board - Lower
———
# 37001-12S
FOR USE WITH STEP #6
Leg - Side Panel
#37001-13S
FOR USE WITH STEP #9
Table Top -Cabinet
#37001-01S
pe ema ae 8
Top End Panel
<<
# 37001-14S
FOR USE WITH STEP #12
Hockey Scorer
# 37001-255
FOR USE WITH STEP #13
# 37001-3058
FOR USE WITH STEP #13
Pusher Felt
Ab
# 37001-18S
FOR USE WITHSTEP #14
Pusher - Sombrero
# 37001-31S
FOR USE WITHSTEP #14

Hardware
FOR USE WITH STEP # 1 FOR USE WITH STEP #2
Screw - Wood - 3 x 18mm
Bysexsss>
# 37001-6258
FOR USE WITH STEP #3
Screw - Wood - 4x 44.5mm
Drsannns
#37001-60S
FOR USE WITH STEP #4
Bolt - Allen - 8x 32mm
(a>
# 37001-648
FOR USE WITH STEP #5
(65)
N77 Wrench - Allen Style
# 37001-655
Screw - Wood - 4x 44.5mm
Daaananes
#37001-60S
FOR USE WITH STEP #6
Screw - Wood - 4x 12mm
XN | ~ XN
#37001-678
FOR USE WITH STEP #7
Screw - Wood - 4x 44.5mm
Dassanns
# 37001-605
ee ee
Barrel Nut- 8mm
te)
# 37001-6958
FOR USE WITH STEP #9
(73)
(50)
0
N Bolt - Hex Head - 8 x 63.5mm
OQ
#37001-70S
Gm
(71)
\/ Washer - Metal - mm
©
#37001-715
(55\
Bolt - Hex - 12mm
Oy
#37001-725
FOR USE WITH STEP # 10
Screw - Wood - 4x 44.5mm
Dasananes
# 37001-608
FOR USE WITH STEP # 12
3
NT Washer - Metal - 12mm
©
# 37001-735
4
7 Washer - Molded - 12mm
©
#37001-745
5
N77 Wrench - Hex
# 37001-7558

Accessories
Triangle - Molded
Y
# 37001-2058
Billiard Ball Set
# 37001-2158
Table Tennis Playfield
al
# 37001-1558
Billiard Cue
a
# 37001-22S
Billiard Chalk
Y
# 37001-235
Foam Football
# 37001-245S
Hover Hockey Puck
# 37001-19S
Football Goal
# 37001-265
Net - Table Tennis
# 37001-275S
Post - Table Tennis
L,
# 37001-285
Brush
=
# 37001-335S
Paddle - Table Tennis
# 37001-2958
Ball - Table Tennis
O)
# 37001-325

ASSEMBLY INSTRUCTIONS
( BEFORE } ENS
BEFORE BUILDING -
Please inspect your playfield
and layout all your parts
Your Cabinet (holds Billiard table and Hockey
Playfield) is NOT replaceable. Any damage that
exists to your playfield is not reparable under
warranty. If your playfield is damaged, the entire
game must be returned to the original place of
purchase for an exchange.
COMPONENTS lee NOTE:
(2) Leg Panel - Left-A Repeat for
all 4 legs.
G) Leg Panel - Left -B
() Leg Panel - Right-A
G) Leg Panel - Right - B
HARDWARE O16
Screw - Wood - 4x 44.5mm x16
COMPONENTS 8106 NOTES
() Leg Cap - Left Repeat for
all 4 legs.
7) Leg Cap - Right
Leg Leveler
Step 1 Assemblies
peas ele
Screw - Wood - 4.x 25mm
LEFT

COMPONENTS e107 NOTE:
@) Lock Pin Repeat for
both ends.
Leg Pedestal
Do not
overtighten.
eae tls ele
Screw - Wood - 3 x 15mm x16
COMPONENTS O16 NOTE:
Ball Catcher Box Repeat for
both ends.
() Ball Board - Lower
When
Step 3 Assembly complete,
flip over.
eae is oie
Screw - Wood - 4x 44.5mm x16
Step 3 Assembly FLIP OVER FOR NEXT STEP
( STEPS }
——_—__” COMPONENTS QTY. NOTES
Step
4
ob.
.
<<
Assembly
oan
Step
2
Assembly
Repeat
or
| ° | = sey q) Step 4 Assembly
es 65
OMe as oO]
‘ Bolt - Allen - 8 x 32mm
—— Wrench - Allen Style
Step 2 Assemblies

( STEP6 )
oY COMPONENTS ole NOTE:
@) Leg - End Panel Repeat for
both ends.
(2) Ball Board - Lower
es lee
Screw - Wood - 4x 44.5mm
STEP 7
C ster? _)
"
Step
5
Assembly
Ea
Repeat
for
i
both
ends.
Step 6 Assembly
Step6 — ||.
Assembly
E
o
Resets
One
7) screw - Wood - 412mm
Step
7
Assembly
Repeat
for
Step
7
both
ends.
Assembly
( STEP8 }
SY eo ONS CHAg
HARDWARE ele
}®
Screw - Wood - 4x 44.5mm
\

( STEP9 }
HARDWARE ene
COMPONENTS QTY. NOTE:
Step 8 Assemblies
Step 8 Assembly Make sure hole
in barrel nut is
©) Leg - Side Panel facing the bolt.
oe”
oem Otherwise it
will not go in
all the way.
HARDWARE QIY.
Repeat for
Barrel Nut - 8mm both sides.
Bolt - Hex Head - 8 x63.5mm
(71) Washer - Metal - 8mm
( STEP 10 }
a COMPONENTS e106 NOTE:
CG) Table Top -Cabinet Repeat for
both ends.
(72) Bolt - Hex- 12mm
(73) Washer - Metal - 12mm
Washer - Molded - 12mm
(75) Wrench - Hex
( STEP 11 }
—_—___/ COMPONENTS ei) 6 ye) es)
Step 10 Assembly Open Lock Pi
Step 9 Assembly pen Lock Fins.
Step 10 Assembly Then gently set the
playfield assembly
in the frame.
Be sure to do it
evenly.
When complete,
engage all 4 Lock
Pins.

COMPONENTS on 6 NOTE:
Step 11 Assembly Repeat for
both ends.
Top End Panel
Do not over
tighten.
HARDWARE OTY.
Screw - Wood - 4x 44.5mm x10
COMPONENTS o1D¢ leas
Step 12 Assembly To complete
this step, the
() Hockey Scorer hockey side
must be
Cue Hook facing up.
If not,
disengage all
4 Lock Pins,
Swivel, then
re-engage all
4 Lock Pins.
( STEP 14 }
—_———_—__———" COMPONENTS oD ¢ NOTES
Pusher Felt Peel back felt
and apply
Gi) Pusher - Sombrero evenly to
bottom of
Pushers.

Limited Warranty
As described in and as limited by this Limited Warranty, EastPoint Sports, Ltd. (the “Company”) warrants this Swivel Table (the “Product”) to be free from defects in
workmanship and materials for a period of 90 days from the date of original purchase. The term defects shall mean any imperfections that impair the use of the product.
The Company reserves the right to request confirmation of Proof of Purchase when requesting parts or service in order to confirm that the game is within its warranty period.
What is Covered: Except as provided herein, this Limited Warranty covers all defects in materials and workmanship. This Limited Warranty is void if the Product is:
Damaged through improper usage or storage, negligence, misuse, abuse, transportation damage, acts of nature, or accident (including failure to follow the
instructions supplied with the product)
Used in commercial applications, rentals or a commercial environment
Modified or repaired by anyone not authorized by the Company
What is Not Covered:
The Limited Warranty does not cover:
Expendable items such as cosmetic parts, game playing accessories, and any other items that may show signs of wear due to normal usage
Any transportation/delivery/installation costs incurred by the Consumer (either home from the original place of purchase or back to the original place of purchase)
What the Company Will Pay For:
If any part or component of the Product which is covered by this Limited Warranty is found by the Company to be defective, the Company will provide replacement
parts without charge. The Company's obligation to repair or replace the Product or any portion thereof, shall be limited to the original purchase price of the product.
If during the Limited Warranty period, the product is found to be defective, the Company will, at the Company's option, repair, replace, or make remuneration for the
Product (either the same or equivalent value) without charge.
How to Obtain Warranty Service: In order to enforce your rights under this Limited Warranty, you must follow these procedures:
You must return the ORIGINAL COPY OF YOUR SALES RECEIPT to the Company.
You must call the Company's Consumer Service Department at 1-973-585-4747 or toll free at 1-877-279-7071 on Monday through Friday between the hours of 9:00
A.M. and 5:00 P.M (EST) to notify the Company of the nature of the problem. At the Company's option, replacement parts or a new Product (either the same or
equivalent value) will be sent to you at no charge.
If you are instructed to return the Product to the Company for servicing, you are responsible for shipping the Product, at your expense, to the address designated
by the Company in packaging that will protect against further damage.
You must also include your name, address, daytime telephone number, Product model number, and a description of the problem.
The Company will pay for any shipping charges to return the repaired of replaced Product to you.
THIS LIMITED WARRANTY IS AVAILABLE ONLY TO THE ORIGINAL PURCHASER OF THE PRODUCT AND IS VALID ONLY IN THE UNITED STATES. THE COMPANY’S
LIABILITY IS LIMITED TO THE REPAIR, REPLACEMENT, OR REMUNERATION, AT ITS OPTION, OF ANY DEFECTIVE PRODUCT AND SHALL NOT INCLUDE ANY LIABILITY
FOR INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY KIND. THIS WARRANTY IS EXPRESSLY MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR
PURPOSE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR DO NOT ALLOW FOR EXCLUSION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES. TO THAT EXTENT, THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
This Limited Warranty gives you specific legal rights, but you may also have other rights that vary from state to state.
If you have any questions regarding this Limited Warranty or the operation of the Product, you may call or write us.
ALL WARRANTY CLAIMS MUST BE ACCOMPANIED BY A COPY OF THE SALES RECEIPT/PROOF OF PURCHASE. REPORT ANY DEFECTS TO:
aE
M4
KASTPOINT
628 ROUTE 10, SUITE #5 WHIPPANY, NEW JERSEY 07981 + 1-973-585-4747

TABLE MAINTENANCE AND CARE
Table Top -
« itis OK to gently vacuum the felt side of the billiard table with any standard handheld vacuum brush
attachment.
« If Hockey or Table Tennis side needs to be cleaned, you can use any gentle surface cleaner (no bleach or
ammonia) with a lint free cloth.
NOTE: DO NOT spray the cleaning product directly on the table surface. It must be applied to the cloth
directly. Then the table top can be wiped in a lengthwise direction
Pucks -
« ifapuckis rough or not gliding smoothly on top of the table surface, gently sand off the scuff marks with
fine grit sandpaper.
Speed -
« if faster puck speed is desired, it is OK to use a wax or oil based cleaner to “slicken” the surface.
NOTE: DO NOT OVER APPLY. A little goes a long way.
NOTE: DO NOT spray the cleaning product directly on the table surface. It must be applied to
the cloth directly and then the table top can be wiped in a lengthwise direction.
a _Y
£0
4
EKASTPOINT
www.eastpointsports.com
628 ROUTE 10, SUITE #5 WHIPPANY, NEW JERSEY 07981 - 1-973-585-4747