Installation instructions
Installation must be performed by a qualified professional and must observe all local, state, national and European
regulations. Before starting installation, make sure that the product is in perfect condition. Laying, electrical
connections, and adjustments must be done to “Industry Standards”.
Packing materials (cardboard, plastic, polystyrene, etc.) are potentially dangerous. They must be disposed of
properly and kept out of the reach of children Do not install the product in an explosive environment or in an area
disturbed by electromagnetic fields.
The presence of gas or inflammable fumes is a serious safety hazard. Provide an over-voltage protection,
mains/knife switch and/or differential on the power network that is suitable for the product and conforming to
current standards.
The manufacturer declines any and all liability if any incompatible devices and/or components are installed that
compromise the integrity, safety, and operation of the product. Only original spares must be used for repair or
replacement of parts. The installer must supply all information regarding the operation, maintenance, and use of
individual components and of the system as a whole.
Maintenance
To guarantee the efficiency of the product, it is essential that qualified professionals perform maintenance at the
times and intervals required by the installer, by the manufacturer, and by current law. All installation, maintenance,
repair and cleaning operations must be documented. The user must store all such documentation and make it
available to competent personnel.
Warning for users
Carefully read the enclosed instructions and documentation. This product must be used for its intended purpose
only. Any other use is improper and therefore dangerous. The information contained herein and in the enclosed
documentation may be changed without notice, and are in fact provided in an approximate manner for application
of the product. Easygates declines any and all liability in this regard.
