
Supplied with 3 rubber ring connectors, Large, Medium and Small, measuring
80mm, 90mm and 100mm in diameter respectively.
BEFORE USE
• Beforeuse,pour2glassesofice-coldwaterintothedriptray.
• Afterselectingtheconnectorthattsyourdryer,followtheinstructionbelowforassembly.
PLEASE NOTE:
Please ensure that you follow the correct instructions below that correspond with the appropriate
Small, Medium or Large connector ring required.
ASSEMBLING THE PRODUCT
For use with the Large rubber ring connector (100mm diameter)
Thank you for purchasing the Tumble Dryer Condenser.
If your kitchen or utility room seems to turn into a Turkish bath every time you use the tumble
dryer,useoureasy-to-tCondenser,whichdoesawaywiththeneedforwallventsoropen
windows. Simply attach the 1.5m exhaust hose (supplied) to the steam outlet on your tumble
dryer, add some ice-cold water to the unit and that’s it. The steam is collected and condensed in
the special re-useable container, which you empty after each use.
Dear Customer
FEATURES
Step 1
Attach the rubber ring
connector to the plastic
connector. Insert and rotate
to lock into position.
Step 2
Press the side-aps down
to secure with the drip tray.
Step 3
Push the hose to the
bottom of plastic connector
to ensure a snug t.
ASSEMBLING THE PRODUCT
For use with the Medium or Small rubber ring connector (90mm/80mm diameter)
AFTER USE
• Emptythedriptrayafteruse.
• Checkiftheproductneedscleaning.
CLEANING AND MAINTENANCE
•Check the inside of the hose and the drip tray from time to time and clean it when necessary.
•Simplywipecleanwithadampcloth.
Step 1
Push the rubber ring
connector down and to
the middle of the plastic
connector - on upper of
three stoppers.
Step 3
Push the hose to the rubber
ring to ensure it is tight on
the ring.
Customer service: 0871 855 6100
For more innovative products from Easylife please visit:
www.easylifegroup.com
No
need
for wall
vents or
windows
Step 2
Press the side-aps down
to secure with the drip tray.