Easylife EL6645 User manual
Deluxe Wireless
Stereo Headphones
INSTRUCTION MANUAL
Model No. EL6645
Please read carefully before use and keep for future reference
Imported and distributed by Easylife Group Ltd, London NW1 0JP
Support Line: 0333 030 0777
For more innovative products from Easylife please visit:
www.easylifegroup.com
IN6645 © 2019 Easylife Group Ltd Support Line: 0333 030 0777
For more innovative products from Easylife please visit:
www.easylifegroup.com
PANTONE 072 C
PANTONE 123 C
everyday solutions
™
Est. 1992
everyday solutions
™
Est. 1992
Listen
comfortably
for hours!
Technical Specications
Transmitter
Transmitting frequency: 86MHz
Modulation mode: FM
Effective Distance: up to 10m
Power Supply: 2xAAA batteries (not included) or
DC 4.5V (optional)
Headphones
Frequency: 86MHz (for wireless headphone)
FM radio: 87.5-108MHz
Distortion: < 2%
Power Supply: 2xAAA batteries (not included)
DISPOSAL
• Pleaserespecttheenvironment!
• Disposeofthepackagingaccordingtothelocalrecyclingregulations.
• Disposeoftheapplianceattheendofitslifespanaccordingtoenvironmentalconsideration.
Important Safety Information
• Please read this instruction manual carefully before use.
• Donotusetheproductinsituationswhichrequirespecialattention(e.g.intrafcorwhenperforming
skilled jobs)
• Always keep the product dry and do not expose it to extreme temperatures.
• Use the product with care and store it in a clean, dust-free environment.
• Switch the headphones off after use to conserve battery power.
• Remove the batteries if not in use for a long period of time.
• Toreducetheriskofreorelectricshock,donotusetheproductnearwateranddonotexposeittorainor
moisture.
• OnlyuseDCadaptorpowersourceasspeciedinthismanual
• Unplug the power supply unit from the wall socket - to completely disconnect the product from the mains
during lightning storms or when unused for long periods of time.
• Ensure that the power supply unit is in a safe operating condition and easily accessible, properly plugged
into the wall socket, only operated within the permissible temperature range, not covered or exposed to
direct sunlight for longer periods of time in order to prevent heat accumulation.
• Do not operate the product near any heat sources.
Note: Replace the batteries if the following occur:
• The transmitter indicator becomes dim.
• The reception gets poor.
• The volume gets weak and the sound is distorted.
Note: Use new batteries all of the same brand
PANTONE 072 C
PANTONE 123 C
everyday solutions
™
Est. 1992
2
A. HEADPHONES
1. Battery Compartment
2. Switch On/Off (Volume Control)
3. SCAN button
4. Power indicator (Lights up when on)
5. RESET button
6. Audio Jack
FrontRearLeft Right
B. TRANSMITTER
7. Power Indicator (Lights up when on)
8. Switch On/Off
9. DC IN
10. Audio In Jack
11. Battery Compartment (bottom)
Support Line: 0333 030 0777
For more innovative products from Easylife please visit:
www.easylifegroup.com
everyday solutions
™
Est. 1992
Inserting the batteries
Release the battery cover on the left side of headphones (Fig 1) and on the base of
transmitter (Fig 2), insert two AAA batteries (not included) into each battery compartment
with correct polarity. Close the battery compartment.
AspeciedDC4.5Vadaptor(optional)canbealsousedasapowersupplyforthe
transmitter. For use, please connect the adaptor to the power socket (9) on rear of
transmitter.
BA
Connecting to the device
The audio cable comes as two parts (Combined length = 155cm)
3.5mm stereo Jack to 2 x RCA Phono Audio Cable (male)
3.5mm stereo jack to 2 x RCA Phono Sockets (female)
Before connecting the transmitter with your electronic device please check what type of
Audio-out ports you have on your device.
General types of Audio Out ports:
Single Audio Out port along with the headphone symbol
First join 2 x RCA Audio Cable (male parts) with 2 x RCA Sockets (female parts)
together so they become one joined cable (Fig 3).
Plug one end of audio cable into Audio Out port on your device such as a radio,
computer, MP3, TV or any device (Fig 4), and plug the other end into Audio In
jack of transmitter (Fig 5).
Please ensure all cables are plugged in tight – no gaps.
R and L Audio Out ports
Plug 2 x RCA Audio Cable (male) into the ports (Fig 6) and plug the other end of the cable
into the jack of transmitter fully.
Please note sometimes the ports are marked as AUDIO L/R. This does not mean always
they are Audio Out ports.
Digital Audio Out (OPTICAL)
If your device has only the Digital Audio Out (OPTICAL) port, you would need a Digital
to Analog Audio Converter (not supplied). After connecting the converter to your device,
you will be able to plug the audio cable into the headphone socket on the converter and
connect it with the transmitter.
Fig 1
Fig 2
Fig 3
Fig 5
Fig 4
Fig 6
Wireless Headphone Setup
•PlugoneendofaudiocableintotheAudioOutsocketonyourdevicesuchasa
radio, computer, MP3, TV or any device, and plug the other end into audio in jack of
Transmitter fully. (See “General types of Audio Out ports” section)
•Toachievethebestreception,ensuretheTransmitterispositionedhigh.Notethat
the cable is also an antenna, so let it lie spread out, not coiled or jumbled up.
•SwitchontheTransmitterbypushingtheswitchto“ON”positionandtheindicator
will light up.
•SwitchontheHeadphonesbymovingthevolumedialuntilitclickspastthe“ON”
position and the indicator lights up.
•Youshouldbeabletohearthesoundfromheadphonein2-3seconds.Adjustthe
volumebyturningtheon/offdialonthesideoftheheadphone.Youcanalsoadjust
the sound volume directly from your connected device.
•If you do not hear anything within 2-3 seconds, press “Reset” then “Scan”.
This should re-initiate the headphones picking up the signal from the
transmitter.
Please note:
Once the wireless headphones start working, you should hear the sound through the
headphonesONLY.
Youshouldnothearanysoundfromtheconnecteddevice,egTV.
There are some TVs that allow the sound to be heard BOTH through the headphones
AND the TV. If you don’t want to hear both, just mute the sound of your TV.
Wired Headphone
The headphones can also be used as wired headphones, avoiding the need to use with
batteries. Insert one of the audio cables into the audio jack of the headphones (Fig 4), and the
other end into the audio out jack of device (such as computer, CD/VCD/DVD/Mp3 Player etc),
then you can enjoy the music from audio sources.
Listen to FM broadcasting
The headphones can be used separately as an FM radio. Turn on the headphones. Press
“RESET” and then “SCAN” button to select the radio station or auto search.
Product Overview
Package Includes: 1 x Transmitter 2 x Audio Cables 1 x Headphones 1 x User Manual
Fig 2
Fig 3
Fig 1
Fig 4
