Easylife 2803 User manual

Model No. 2803
Please read carefully before use and keep for future reference
Easylife Ltd, London NW1 0JP
Support Line: 0333 030 0777
© Easylife Ltd. 2021 (Reg. No. 05221840)
For more innovative products, please visit
www.easylife.co.uk
IN2803 © 2021 Easylife Ltd
Support Line: 0333 030 0777
www.easylife.co.uk
TECHNICAL SPECIFICATION
Material: Iron
Measurements:
Handle 49.7cm wide
Legs adjust from 33.1cm to 54.7cm
Handles adjust from 40.3cm to 50.5cm
Base extends from 87cm to 11.25cm and 50cm wide.
Weight limit: 158kg (350lbs)
CLEANING AND MAINTENANCE
Clean regularly. Wipe down with a mild nonabrasive detergent /disinfectant solution.
DISPOSAL
• Please respect the environment!
• Dispose of the packaging according to the local recycling regulations.
• Dispose of the appliance at the end of its life span according to environmental consideration.
Bed Support Rail
INSTRUCTION MANUAL

Support Line: 0333 030 0777
www.easylife.co.uk
Please ensure the following instructions fully read and are followed, Failure to
follow these instructions could result in injury to the user.
WARNING:
1. Please ensure the user does not exceed the maximum weight 158kg (350lb)
2. Do not exceed the weight limit stated as doing so could put the user at risk
3. Examine fully for any damage or faults and read the manual carefully before
using Bed Support Rail. If you suspect a fault or damage, do not use and contact
customer service immediately.
4. Do not use without a mattress or with a mattress less than 12.7cm (5inch) thick.
5. Clean regularly with a soft cloth and do not use abrasive cleaners
6. Keep out of reach of children. This product is not a toy.
7. This product is not designed for use with proling beds.
8. This product is not designed to prevent you falling from your bed. If you have
any issues or concerns surrounding falling out of bed whilst sleeping, then you
may require a dierent style of product.
9. This is designed to aid mobility and independence in bed and to help you whilst
transferring to and from bed
10. Ensure all nuts, bolts and components are fully tightened prior to installation
and use, this setup and assessment should be performed by persons not
suering from any physical incapacity and who are condent they can ensure
safe installation.
11. This product is not designed to be used by people who are completely
incapacitated. Enough upper body strength is required to use the bed lever
appropriately.
12. Please consult your doctor to ensure that this item is suitable for your needs.
13. This item is not a Medical Device; it is an aid to living. It is designed to assist you
with activities and make things easier, it is not designed to alleviate symptoms or
treat any specic conditions. If you wish to use this item in conjunction with any
other Medical Equipment, please seek Medical Advice rst.
A:
1PIECE B: C:
Assembly
Hardware List
2PIECE 2PIECE
D: E:
A
BB
CC
D
C
D
D
D
E
2PIECE 1PIECE
A
B
B
C
F
G
F
G
403-505mm
331-547mm
497mm
870-1125mm
BACK
BACK
1. 2. 3.
4. 5.

Support Line: 0333 030 0777
www.easylife.co.uk
ADJUST THE HEIGHT OF TOP HANDLE
Loosen the locking collars on the top section of part B rst.
Press and hold the locking pin on the top section of part B, pull the handle to
desired height and release the locking pin. Ensure the locking pin is fully through
the hole.
Repeat the same to the other side.
Ensure both side of the handle are adjusted evenly.
Tighten the locking collars on each side.
POSITIONING THE BED SUPPORT RAIL
Ensure that the mattress is no less than 12.7cm (5inch) thick.
The Bed Support Rail should be placed under the mattress.
The Bed Support Railshould be placed in a position where user can reach the handle
without stretching.
Lift the mattress and place the Bed Support Rail baseat a convenient distance from the
head of the bed for the intended user.
ADJUST THE HEIGHT OF THE LEGS
Press and hold the locking pin on the leg (lower section of part B), pull the leg out to
desired height and release the locking pin. Ensure the locking pin is fully come through
the hole on the leg.
Repeat the same to the other leg.
Ensure both legs are adjusted evenly.
Ensure both feet are on the oor.
Put down the footrest and make sure the safety clips are rmly clipped on to the left foot.

Support Line: 0333 030 0777
www.easylife.co.uk
ADJUST THE LENGTH OF BASE ON BED SUPPORT RAIL:
Loosen the locking collar on part C. Extend the base to a suitable length according to the
size of the bed.
Put the mattress back to the bed.
The Bed Support Rail should be placed under the mattress.
CHECK THE PRODUCT IS STABLE AND SECURE BEFORE USE.