Easypix EasyPad 970 Use and care manual

1
The firmware update
__________________________________________________________
Reference:
Please make sure that all your personal data
are saved of the EasyPad 970.
ATTENTION!
The firmware update will erase all data from the memory of the device.
Please open the file 970_40_120330.zip
____________________________________
Please extract the file 970_40_120330.zip to C:\

2
The installation
__________________________________________________________
Please turn off your EasyPad 970.
Please also get sure that the charger is PLUGED OFF the EasyPad.
Please press the volume button "-" on the EasyPad 970 and hold it while connecting the device
with the USB cable to the PC.
After connecting the device, please release the button.
Now, this window appears on the PC:
(Illustration is similar to english version)
Please select "No, not this time"
and click the next-button to continue.

3
(Illustration is similar to english version)
Please select
„Install from a list ... „
and click the next-button to continue.

4
(Illustration is similar to english version)
Please select „Search for the driver ...“
and mark also „Following location in the search“
and click the next-button to search.

5
(Illustration is similar to english version)
Please navigate to the directory „C:\970_40_120330\RK291X Rockusb driver\ ... “
+ your processor (amd64 oder x86)
+ your operating system (2000, Vista, Win7 oder XP)
and please confirm with

6
(Illustration is similar to english version)
Please click the next-button to continue.

7
(Illustration is similar to english version)
Please click the button to continue the installation.

8
Please click the button to complete the installation – the installation will be completed.
After that you can disconnect the EasyPad 970 from the PC.

9
Firmware update
__________________________________________________________
Please make sure that no other programs are running on your PC.
Please start the program RKBatchTool in the directory C:\970_40_120330\2.0 sdk update tool

10
Please press the volume button "-" on the EasyPad 970 and keep it pressed while connecting
the device with the USB cable to the PC.
After connecting the device, you can release the button.
Now the area „Device1“becomes coloured:

11
Please confirm by selecting the button „Upgrade“.
After the message "Upgrade Done Success"appeared (this takes about 5 minutes)
you can disconnect the EasyPads 970 from the PC.
This makes the update process complete and you can continue working
on your EasyPad 970 as usual.