Easypix SmartPad neo Use and care manual

1
The firmware update
__________________________________________________________
Reference:
Please make sure that all your personal data
are saved of the SmartPad.
ATTENTION!
The firmware update will erase all data from the memory of the device.
Please open the file EP772NEOFW.zip
____________________________________
Please extract the file EP772NEOFW.zip to C:\

2
The installation
__________________________________________________________
Please turn off your SmartPad.
Please also get sure that the charger is NOT PLUGED IN the SmartPad.
Please press the volume button "+" on the SmartPad and hold it while connecting the device
with the USB cable to the PC. After that please plug in the charger too (while you are still holding the
volume button "+" ). After connecting the device and the charger, please release the button.
Now, this window appears on the PC:
(Illustration is similar to english version)
Please select "No, not this time"
and click the next-button to continue.

3
(Illustration is similar to english version)
Please select
„Install from a list ... „
and click the next-button to continue.

4
(Illustration is similar to english version)
Please select „Search for the driver ...“
and mark also „Following location in the search“
and click the next-button to search.

5
(Illustration is similar to english version)
Please navigate to the directory
„C:\EP772NEOFW\tool+driver\ ... “
+ your processor (amd64 oder x86)
+ your operating system (2000, Vista, Win7 oder XP)
and please confirm with

6
(Illustration is similar to english version)
Please click the next-button to continue.

7
(Illustration is similar to english version)
Please click the button to continue the installation.

8
Please click the button to complete the installation – the installation will be completed.
After that you can disconnect the SmartPad from the PC.

9
Firmware update
__________________________________________________________
Please make sure that no other programs are running on your PC.
Please start the program RKBatchTool in the directory
C:\EP772NEOFW\tool+driver\1.8_tool

10
Please press the volume button "+" on the SmartPad and hold it while connecting the device
with the USB cable to the PC. After that please plug in the charger too (while you are still holding the
volume button "+" ). After connecting the device and the charger, please release the button.
Now the area „Device1“becomes coloured:

11
Please confirm by selecting the button „Restore“.
After the message "Upgrade Done Success"appeared (this takes about 5 minutes)
you can disconnect the SmartPad from the PC.
This makes the update process complete and you can continue working
on your SmartPad as usual.