Easypix Magic LCD Board User manual

User manual

Maintenance
- Cleaning: Please clean gently with soft cloth
- Storage temperature: -10°C-60°C
- Operating temperature: 10°C-40°C
Stylus
Writing Area
Erase Lock
Erase Button
Battery
Case

Turn off Erase Lock Turn on Erase Lock
Attention:
The Erase Lock is off in default.
1. When Erase Lock is off, the Erase Button is disabled.
2. When Erase Lock is on, the Erase Button is available.
Battery Replacement:
1. Remove screw.
2. Pull out battery case.
3. Replace the battery. (Requires one CR2016[3V] battery.)
4. Insert battery case into the board.
5. Re-tighten screw.

Attention
To achieve better writing experience and to avoid scratching the
screen, please use the matching stylus.
Warning:
- Please do not press too hard or write with sharp objects that
could damage the screen.
-This product cannot transfer data or images to or from any other
device.
-Keep the product away from moisture and do not submerge it
in water.
-Avoid continuous exposure to sunlight.
Warning: Small parts included, not suitable for kids
under 3 years old.
Warning: Do not disassemble the product.

DECLARATION OF CONFORMITY
Easypix hereby declares that the product Magic LCD Board is in conformity with all
the essential requirements of Directive 1999/5/EC.
The declaration of conformity can be downloaded here:
http://www.easypix.info/download/pdf/doc_magic_lcd.pdf
For technical help please visit our support area on www.easypix.eu.
Only EU