Ecler essentials ePINBLU User manual

QUICK GUIDE
ePINBLU
AUDIO ACCESSORIES
Wireless Audio Receiver

Start-up
In order to pair your ePINBLU with other wireless devices, you must bring the ePINBLU
into pairing mode:
1. Hold the LED button (PLAY / PAUSE) for 2 seconds until the LED flashes
red and blue alternately.
2. Activate Bluetooth on your device and set it to search for new devices.
3. Select “Ecler ePINBLU” on your device.
NOTE: if necessary, enter the password: 0000 or 8888 to connect.
Multi-function button
Function Operation LED indicator
Power ON
Hold the LED button for 2s.
until the LED flashes blue
It will flash blue, then will flash
red and blue
Power OFF
Hold the LED button for 2s.
until the LED flashes red
It will flash red at first, then
turn off
Play Press LED button once It will flash blue every 4s.
Pause Press LED button once
It will flash blue twice every
4s.
Pairing mode Hold LED button for 2s.
It flashes red and blue
alternately
Volume +/- Hold “+ / -” button It flashes blue once every 4 s.
to indicate working status
Prev. / next song Press “+ / -” button