Eclipse avn5435 User manual

(ECLIPSE'
I
Reference Guide
We appreciate your purchase of this receiver.
Please read through this manual for correct operation.
We suggest that after reading it you keep this manual
in asafe place for future reference.
eO
FUJITSU TEN

The symbols described below are found in this instruction manual as
well
as on the device itself to insure its proper and safe usage and to
prevent injury or damage to property. Make sure you understand the
meaning of these symbols before reading the rest of this manual.
Warning
This sign indicates asituation in which incorrect handling
through disregard of asign might result
in death or serious
personal injury.
This sign indicates asituation
in which incorrect handling
through disregard of asign might result
in personal injury or
may result solely
in damage to property.
The following symbols will precede information useful for preventing
damage to the device as well as for its smooth operation.
ADVICE
ATTENTiON
Follow this advice to prevent malfunctions or damage to the
device. Perform the indicated action
in the event of a
malfunction.
Useful information for smooth operation
Facts to keep
in mind when operating
•Please read
all materials such as manuals and warranties that have come with
the product.
Fujitsu
Ten will not be responsible for unsatisfactory product performance
due to failure to follow these instructions.
•Changes
to product specifications may result in differences between content of
the manual and features of the product.
Please use care in handling the manual.
Forcefully spreading or pulling on pages may result in their falling out of the
binding.
Use the manual carefully.

•
•This·device was made for vehicles equipped with
a12V battery. Do not use in
nalarge truck, cold area vehicle or any other vehicle that uses a24V battery.
Otherwise, fires may result.
Warning •Make sure to follow the actual traffic regulations when driving even during
route guidance. Driving your vehicle while only following route guidance
instructions may lead to traffic violations and cause accidents.
•For the sake of safety, the driver should as far as possible avoid operating the
unit while driving. Operation while driving can lead to unforeseen accidents
such as losing control of the vehicle. Stop the vehicle before operating the
unit. When viewing screens while driving, spend the minimum possible time
with your eyes off the road. This
yvill distract you from the road ahead, poten-
tially causing an accident.
•
You should never register geographical points or perform memory settings
while driving the vehicle. This will distract you from the road and cause acci-
dents. Park the vehicle
in asafe area before operating the device.
•Make sure to park the vehicle
in asafe place and set the parking brake before
watching DVDs or videos. For safety reasons, only the sound of
DVOs or vid-
eos will be emitted while the vehicle is
in motion.
•
Do not insert foreign objects into the disc insert slot. This may cause fires or
shocks.
•
Do not disassemble or rebuild this product. Doing so may cause an accident,
fire or electrical shock.
•Do not pour water or insert foreign objects into the device. This may cause
smoke emissions, fires or shocks.
•
Do not operate the product in amalfunctioning condition, for instance, when
the audio does not play. Doing so may cause
an accident, fire or electrical
shock.
•When it
is necessary to replace the fuse, always use afuse of the correct rat-
ing (number of amperes). Use of fuses with higher amperage ratings may
cause afire.
•If an abnormal situation occurs, such
as foreign matter entering or liquid
splashing on the product, or smoke or astrange odor emitting from the unit,
shut off the product immediately and consult the dealer from whom you pur-
chased it. Continued operation may cause
an accident, fire or electrical shock.
•
Do not touch the antenna wire or the device itself whenever you hear thunder.
There is adanger of electrocution due to lightning.
•Do not park your vehicle in an unauthorized area to operate the device.
¢) Go to the next page

C;lution
•This device can be used when the engine switch is either at ON or ACC, how-
ever, to avoid depleting the battery, operate it with the engine running.
•This product must be operated only as on-board equipment. or it may cause
electrical shock or injury.
•Play the audio at amoderate volume level that permits you to hear sounds from'
outside the car. Driving without being able to hear outside sounds may result
in
an accident.
•Check the volume prior to turning the device ON.
11 the volume is turned up
when turning the switch
ON, aloud sound will emit which may damage your
hearing.
•Do not put your fingers into the disc insert slot. Otherwise, injury may result.
•Exercise caution as
to avoid getting your fingers caught when closing the dis-
play or adjusting its angle. Otherwise. injury may result.
•Do not touch heated parts of the device. Otherwise, burns may result.
•For safety reasons when moving the device. have aspecialist at the store of
purchase reinstall for you. Specialized techniques are necessary to uninstall or
install the device.
•
Do not use the device in the event it emits adistorted sound or other such
abnormality. Otherwise, fires may result.
•The device's liquid crystal display is equipped with afluorescent tube. Check
your local rules and regulations regarding its proper disposal.
•Using the device at extremely high or low temperatures may lead to improper
operation and malfunctions. Lower your windows
in order to bring down the
temperature before using the device especially during the hot summer months.
•Letting water or metal objects go into the device or exposing it to strong
shocks may cause malfunctions. Exercise caution.
•
Take note of the following when ejecting adisc or setting the display tilt posi-
tion:
For vehicles with an automatic transmission
•When removing each disc, switch to Neutral in the event of interference when
in Park and proceed. (For acolumn automatic transmission. perform this
operation when
in either Park or Neutral.)
•
When setting the tilt, make sure there is no interference generated from your
hand pr other obstructions when setting when either
in Park, Reverse or Neu-
tral. (If there is interference when
in Drive, do not set the tilt.)
For vehicles with amanual transmission
•When removing each disc, if interference is generated when in 1st, 3rd, 5th
or ®(Reverse) gear, switch to Neutral and proceed. However,
do not per-
form this operation while driving.
•When setting the tilt, make sure there is no interference generated from your
hand or other obstructions when either
in 1st, 3rd. 5th or ®(Reverse) gear.
(Do not set the tilt if there is interference.)

Use each instruction manual in the following order.
The AVN5435 comes with 3instruction manuals.
Use each manual separately depending
on how you are using the device.
, Until you are completely comfortable with all of the device's basic functions:
Read the "Reference Guide".
Only basic operations and most frequently used functions
are
described.
----"--
----_ .. _-
----_ .... -_-....
ft.fnul[Jj
(When wanting to master all navigation functions: .:
.. , ~' '". ~ . . ...
Read the "0WNER'S MANUAL/Navigation II ,
All navigation functions are described.
:<~hen wantil1g to master all audio functiolls: '. ',:}.
Read the "0WNER'S MANUAL/Audio",
All audio functions are described .
•
----- _-
----_ _-
"'----,-_ .. -..
ATTENTION
The screens used in the instruction manuals may differ from the actual screens
appearing on the device depending on the type of database and when it was
compiled. Also, the GPS mark does not appear on the navigation screens.

j
"\\,j/ IE /i\l,jj iii
I \Yi} /J:;;; 'i.'!Id !U
•

Item title
A number and title is
assigned for each item.
Section title
Atitle is assigned for each section.
Operation title
Atitle is assigned for each
operation purpose.
Detailed operation title
Atitle is assigned for
each detailed operation
purpose.
~o listen to aCD/MP3
:::eU.
I, When a disc is not inserted
oInsert adisc.
I
I 4l) It automatically starts playing.
II ~When a disc is inserted
I0Touch m
or EID for AUDIO
MENU.
I
,
,
AUDIO MENU ;-,.
'4. -- f" "~f'
~. D!J 0", ~
:~ ... ~rr CiJ ;1'11 IS
)
I
!
I
Operation procedure
Describes the operation.
Proceed with the operation as
per the numerical order.
ADVICE
Additional points regarding
the
operations are given
here.
If sound data and MP3 data are mixed on the same disc. only the data recorded
in the first session can be played. For details, see "CD player operalion" or
"MP3 player opert on" in the OWNER'S MANUAUAudio.
9' Press r~ or t~,. .. 11"-" 1-- .~ ~ ..
I . . Track selection .-
rSWitch to the. next track wr n playing a CD or to (track start point), o---fI
the next musIc file when pi ylng an MP3. fast-forward, rewin •
buttons I_
•

An MP3 compresses music data into 1/10 its original size enabling it to store
about 10 times the music data of one CD. This device simultaneously displays 9
folders/files
enabling the easy selection of desired music files.
"i
Operation examples
Each definite operation is
given here.
oTouch one of the folderlfile
Iselection switches.
I" Touch afolder and the data stored in it will appear.
I Touch amusic file to play that file.
I
6> Touch IiiIDto view the file information stored for
the song being played (album name, song title).
I
I
•
I
~N;itkli'!JAWl!mlili-
I0Press and hold the ~ or ~~
switch until abeep is heard.
Folder/file selection switches
Track selection ~"" ~
(track start point). .: .
fast-forward, rewin
buttons '. ;
' .. ' .~
Aa:n (.
•
.2
~
Operation switch
Switches needed to perform
operations
are displayed.
Section side heading
Only the section side heading
will appear.
Operation screen
Ascreen showing the
operation will appear.
~ Go to the next page
The operation procedures are
continued on the next
page .

For the safe usage of this device 2
Safe'ty' preca.lItions -. Ii ••••••••••••••••••• -.- •• 3
How the instruction manuals are organized 6
Use each instruction manual in the following order. 6
How to 'use this manual ..8
Table of Contents ......... .. •. .. ................ .. ... .. .... .. 10
Name of parts 14
Panel buttons 14
Touch switches. .................................................. 15
When using for the first time .. .... .... . ... . .. .. 16
Loading the program into the device 16
Tuming the power ON or OFF .. .... ..... .... .. ... ... .. ..... . .. 18
How to tum the powerON or OFF. ................................ .. 18
Inserting the disc 19
How to insert or ejecta CD or DVD ................................ .. 19
Display angle adjustment ................................... .. 24
Adjust the angle of the display 24
Modes a, •••••••••••••••••••••••••••••• •• 25
Get to know each mode 25
Operational conditions ~ 26
Each operation condition for device functions ......................... 26
-Switching modes 27
Get to know.how to switch modes 27
•

Switch the audio source (mode) ~ 74
. SWitching the audio sQurce(mode) . 74
AMlFM .radio operation , .. , .. ~ ,. ............ .. 76
How to listen to thE3 AMIFM radio : 76
HD RADIO (lBOC) operation ~ 78
How to listen to the HD RADIO (IBOC) '.' 78
SIRIUS satellite radio operation 80
How to listen to the SIRIUS satellite radio ,80
CDIMP3 player operations ~ ............ .. 82
How to listen to a CD/MP3 " 82
DVD player operation ...............'......................... '85
How to view a DVD video 85
Adjusting sound quality 88
Adjusting sound quality ............................................ 88
ESN (KeyCDsecurity)operation .•. . . . . . •. . . . . . . •. •. . . . . . . ••• .92
Setting ESN security .' .......................... 92
Other settings ,97
Cancel the "beep" sound made when operating the switches 97
Switch the screen display size 98
Specifications 1 00
•

The unit can be operated by pressing buttons on the frame of the panel (panel but-
tons) and by touching buttons displayed
on the screen (touch switches). This deck
supports use of aremote control.
The remote control is sold separately and can be
purchased at your local retailer.
Panel buttons
Press the panel buttons found on either side of the screen to operate the device.
-_ .. _@
----@
-----.@)
-----@
--@
tr~
AVN543S
r;.",
~
r"~
'DES!:
___ .0
~
-~.~
~
Li-~
~
I JI ::::
r~
~-
~I
~-
Jl~
s-
1~~j1
I~m~
LECUPSE
i 1:>,,1::»' i&
..
G)----- ...
®-------
@--------
@------
@-------
®....J
(j)-
'T
PWR button Press to turn the DVD or audio
ON or OFF.
~
.CONT button Press to display the audio or DVD operation screens.
'i
(SOURCE) MENU Press to display the audio menu screen that enables the switching of audio
Button modes.
4ESNINDICATOR
After ESN security setting, the lamp will flash when the ignition key is turned to ACC OFF.
'5
VOL buttons Press to adjust the DVD or audio volume.
'6'
.DISP button Press to adjust the screen image quality or blacken the screen.
7OPENITILT button<
.. •.· •. ·.
:'.
Calls up the TILT/EJECT screen.
'8
'NAVI buttqn,.·.
..Press to display the navigation screen and present location.
'i
DEST button
,.
Press to set the destination determined by the navigation system.
iIr
(NAVI)rvtENLJ button Press to
display the navigation menu screen.
11
TUNE/TRACK buttons Press
to select radio stations, CD audio tracks and DVD chapters.
'il
INFOblltton .'
Press to operate each navigation information function.
,,- , ~
,.~
MUTE button .Press to temporarily
cut off the sound.
Amenu screen appears.
-------.- -- ----------- - -------------------------------- ~

Touch switches
Unit can be operated by touching buttons on screen.
L...---Touch switch
"beep" "beep"
The touch switch displays will disappear. •
Touch
l!l1I to display the touch
switches.
[About operation of touch switch]
•Touch the buttons until abeep sound is emitted.
•Touch the buttons lightly to prevent damage to the screen.
•
If abutton does not respond, remove your finger and touch it again.
• An unavailable button is shaded.
•When the switch function
is activated, the touch switch for that function will appear green.
• TouchmIil
--------------------------.-------- - --- ~ ---------------,
'Cclution
Touch these switches with your fingers.
Using apen, pencil
or other object with ahard or sharp tip to touch on the
screen may cause damage.

Loading the program into the device
After purchasing the device and using it for the first time, load the map
disc program into the device.
4) Turn the engine ON.
Screen after turning the power ON
QTouch Ito
open the display and insert the
map disc into the map disc slot.
•The device will start reading the program.
• A progress bar will appear as the program
is being
read.
•On completion of program reading, the opening
screen is displayed.
Program reading in progress screen (approx. 70 seconds)
NAVIGATION SYSTEM
LECLIPSE
Opening screen (approx. 10 seconds)
While program loading is in progress, do not turn the engine OFF or operate any
other switch.

oSelect the language.
•Touch I:Emm to use English.
•Touch
~ and then I:Emm to use
French.
oWait approx. 30 seconds.
•Press ~;::j;ii4f.i to display the map screen.
4:) Turn the engine OFF.
c
i4
c
QTurn the engine ON and start the device.
e
ATTENtION
• The same operation is necessary when starting the device for the first time
after having replaced the vehicle battery or fuses.
•When inserting the map disc for the first time
and the program is read after
having cut the power from the vehicle battery, the following massage may
appear
"DVD check in process."
After program reading is complete, the
device will start reading the map data
from the program approx. 30 seconds after the map screen appears. Attempting
to operate the
device during this time may result in improper operation. Do not
operate the switches during this time.

How to turn the power ON or OFF
When the engine is turned ON, the DVD/audio power will automatically
turn ON and the Caution screen will appear. Touch E:m to switch
to the Navigation screen. The power will turn
OFF when turning off the
engine.
<Opening screen>
(ECLIPSE
<Caution screen>
<Navigation screen>
•Press ~1!~VC if the navigation screen does not appear.
•Press
~P~WR;~ if the audio or DVDdoes not turn ON .
....... -:.~-M· ...... ·_.
ATTENTION
PWR button
",:,::,": .. ,'.'
..... ~ '.:' .
~-- NAVI button

How to insert or eject aCD or DVD
Insert an audio CD when wanting to listen to music.
oTouch either ED, B!lD or
miIm·
The display opens and the disc slots become
accessible.
CD insert slot
c
14
c
ATTENTION
CclUtion
The display can be opened even after pressing lllllj for approx. 1second
until a"beep" sound is heard.
.. If the vehicle's automatic transmission shift lever is in the "P" position or
manua~ transmission lever is in the 1, 3, 5or ®position, or if abottle or other
container is
in the cup holder, this could interfere with the opening and closing
of the display. When it
is safe to do so, move the shift lever to the "N" or
"Neutral" position or remove the container from the cup holder before opening
or closing the display.
sDo not place cups or cans on the display when it is opened. The display may
be damaged.
•Quickly wipe away any liquid spilled on the display. Otherwise, damage may
result.
•
To protect the display from heat or dust, keep it closed at all times except
when inserting or ejecting adisc.
•Do not press 11IIwhile inserting adisc.
~ Go to the next page

eInsert the desired disc into the slot.
GWhen the CD or DVD is fUlly inserted, the display closes
automatically.
• As soon as an audio CD is inserted, playback starts.
•
As soon as amap disc is inserted, the navigation screen is displayed.
• As soon as a DVD is inserted, playback starts.
•
Do not touch ra::!'!mJor press ~I while adisc is being inserted.
•
Do not use an adapter when inserting 8cm CDs. Ejecting may be rendered
impossible.