Eco-Systems ECO-30C Manual

866.463.2611 •www.ecosystemsdisplays.com
Setups
Order #XXXXX - ECO-30C Sustainable Pedestal
Infill Panel
Infill
Panel
4
7A
2
6A
5A 1
3
5
78
8A
Counter
Assembled
Door
Shelf/Bottom
6
When assembled
Item
1
2
3
4
5
5A
6
6A
7/7A
8/8A
Qty.
1
1
1
1
1
1
1
1
1/1
1/1
Description
40”h RSG540 Oval Vertical Extrusion w/ Door Hinge
40”h RSG540 Oval Vertical Extrusion w/ Door Stop
40”h RSG540 Oval Vertical Extrusion
40”h RSG540 Oval Vertical Extrusion
8”w Z46 Horizontal Extrusion w/ lip
8”w Z45 Horizontal Extrusion
8”w Z46 Horizontal Extrusion w/ lip
8”w Z45 Horizontal Extrusion
22”w Z45 Curved Horizontal Extrusion
16.138”w Z45 Curved Horizontal Extrusion
Steps:
1) Connect horizontals [5] between verticals [1] & [4];
Place Infill; secure with horizontal [5A].
2) Connect horizontal [6] between verticals [2] & [3];
Place Infill; secure with horizontal [6A].
3) Attach curved horizontal [7] between verticals [3] & [4];
Place Infill; secure with horizontal [7A].
4) Connect curved horizontal [8] between verticals [1] & [2].
5) Place Shelf/Bottom to rest on lips of horizontals [5] & [6].
6) Connect curved horizontal [8A] between verticals [1] & [2].
7) Place Counter on top of assembed pedestal body.
8) Hange assembled door on the hinges attached to vertical [1].
See Door Attachment detail.
*
*Door
Hinge
Hinge
Slide pin into
hinge attached
to vertical.
Slide door
hinge over pin.
Door Attachment
*
Pin
I
n
f
i
l
l
P
a
n
e
l

866.463.2611 •www.ecosystemsdisplays.com
General Info
7A
General Setup Instructions
•The setup instructions are created specifically for your configuration.
•Setup instructions are laid out sequentially in levels, including exploded
views and a logical series of steps for assembly. We encourage you to study
the instructions before attempting to assemble your exhibit.
Hex Tool for Assembling Exhibit Extrusion Lock Connectors
Numbering Instructions for Setups/Packing Inline Connection between Extrusions Baseplate Connection for Vertical Extrusions
Cleaning and Packing
•Use non-abrasive cleaners when cleaning extrusions or ECO Glass inserts.
•Use mild cleaners and soft materials such as cotton to clean all laminates.
•Keep exhibit components away form extreme heat and long exposure to
sun light. This will prevent warping and fading.
•Retain all packing material for ease of re-packing. This protects the exhibit
components and keeps each part organized.
Disassembling
•When disassembling exhibit, tighten all setscrews to prevent loss of hardware
in the shipping process.

866.463.2611 •www.ecosystemsdisplays.com
Case 1
Top View of Each Level
Level 1 Level 2 Level 3 Level 4
4 1 2 3
7/7A 8/8A
5A/6A
5/6
Pedestal
Counter
Assembled
Door
Pedestal
Shelf/Bottom
Front
Infill Panel
Side
Infill Panels
(x2)