EcoNet UETST800SYS User manual
User Guide Table of Contents
Overview................................................................................................................................................... 3
Items Included in the Box.............................................................................................................................. 3
Homescreen Overview ................................................................................................................................ 4
Icons to Become Familiar With...................................................................................................................... 5
Standby Screen .......................................................................................................................................... 6
System Modes .........................................................................................................................................7–9
Connecting to WiFi ................................................................................................................................... 10
Weather .................................................................................................................................................. 11
Menu Options .......................................................................................................................................... 12
Settings...............................................................................................................................................12–16
Settings > Basic .............................................................................................................................12–13
Settings > Time ................................................................................................................................... 13
Settings > Humidity ........................................................................................................................14–15
How to Test a Humidifier ...................................................................................................................... 15
Settings > Away Settings...................................................................................................................... 15
Settings > Vacation.........................................................................................................................15–16
Settings > Fan..................................................................................................................................... 16
Schedules................................................................................................................................................. 17
Status ...................................................................................................................................................... 18
Service ...............................................................................................................................................19–20
Service > Current................................................................................................................................ 19
Service > History ................................................................................................................................ 19
Service > Alerts .................................................................................................................................. 19
Service > Support ............................................................................................................................... 20
Service > Equipment............................................................................................................................ 20
Water Heating.......................................................................................................................................... 21
EcoNet Smart Thermostat Installation Instructions........................................................................................... 22
Safety Considerations................................................................................................................................ 23
Thermostat Location................................................................................................................................... 24
Wiring Considerations............................................................................................................................... 25
Mounting EcoNet Smart Thermostat............................................................................................................. 26
Wiring Remote Temperature Sensor............................................................................................................. 27
Installer Settings...................................................................................................................................28–31
Furnace Settings.............................................................................................................................28–29
AC/HP Settings .................................................................................................................................. 30
Thermostat Settings.............................................................................................................................. 31
Air Handler Settings ............................................................................................................................ 31
Caring for your Thermostat......................................................................................................................... 32
How to Connect a Ventilator to an EcoNet HVAC System............................................................................... 33
Regulatory and Warranty Information.......................................................................................................... 34
EcoNet®Smart Thermostat User Guide 2
> Return to Table of Contents
EcoNet Smart Thermostat User Guide
The EcoNet®Smart Thermostat is an easy-to-use programmable thermostat that provides complete control over your
home’s smart air and water comfort systems. It’s smart enough to alert you when an issue is detected, yet it’s designed
to be simple to operate with an intuitive touchscreen interface. And it has built-in WiFi so you can monitor your system
and adjust temperatures and schedules while on-the-go.
More than a thermostat, it’s part of an intuitive system that maximizes comfort and efficiency while offering complete
peace of mind—so you can stay focused on what matters most.
Items Included in the Box
EcoNet Smart Thermostat
Wall Mounting Plate
Ferrite Toroid
Mounting Screws and Drywall Anchors
Quick Start Guide
QUICK START
GUIDE
E1
E2
C
RR
E1
E2
S1
S2
C
R
E1
E2
C
OUTDOOR UNIT INDOOR UNIT OPTIONAL REMOTE
TEMPERATURE SENSOR
ECONET
SMART THERMOSTAT
R C S1 S2 E1 E2
QUICK START
GUIDE
E1
E2
C
RR
E1
E2
S1
S2
C
R
E1
E2
C
OUTDOOR UNIT INDOOR UNIT OPTIONAL REMOTE
TEMPERATURE SENSOR
ECONET
SMART THERMOSTAT
R C S1 S2 E1 E2
EcoNet Smart Thermostat
QUICK START
GUIDE
E1
E2
C
RR
E1
E2
S1
S2
C
R
E1
E2
C
OUTDOOR UNIT INDOOR UNIT OPTIONAL REMOTE
TEMPERATURE SENSOR
ECONET
SMART THERMOSTAT
R C S1 S2 E1 E2
Wall Mounting Plate
QUICK START
GUIDE
E1
E2
C
RR
E1
E2
S1
S2
C
R
E1
E2
C
OUTDOOR UNIT INDOOR UNIT OPTIONAL REMOTE
TEMPERATURE SENSOR
ECONET
SMART THERMOSTAT
R C S1 S2 E1 E2
Ferrite Toroid
x 2
x 2
Mounting Screws
and Drywall Anchors
QUICK START
GUIDE
E1
E2
C
RR
E1
E2
S1
S2
C
R
E1
E2
C
OUTDOOR UNIT INDOOR UNIT OPTIONAL REMOTE
TEMPERATURE SENSOR
ECONET
SMART THERMOSTAT
R C S1 S2 E1 E2
EcoNet®Smart Thermostat User Guide 3
> Return to Table of Contents
Homescreen Overview
What This Means to Me, The Homeowner:
Weather
Current weather condition and outside
temperature; tap to see forecast
Brand Logo
Tap to access contractor information and
support help
One-Touch Away
Tap once to enter preset Away settings; tap again
to return to previous settings or
resume schedule
Indoor Temperature
Shows the current temperature
inside your home
Menu
Tap to navigate to the full Menu where you can
change basic settings, customize your
schedule and more
Alert
Indicates an important reminder, minor alert, or
critical alarm; tap for additional details
WiFi
Current WiFi signal strength; tap to start the
setup process
Humidity
Current relative humidity in your home; tap to
configure to your preference
System Mode
Tap to navigate to Mode selection screen
(auto/heat/cool/e-heat/fan/off)
System Set Point
System Mode
Temperature Adjustment
WiFi
Alert
Humidity
One-Touch Away
Indoor Temperature
Brand Logo
Weather
Messaging Bar
Menu
EcoNet®Smart Thermostat User Guide 4
> Return to Table of Contents
Icons to Become Familiar With
Weather
Windy
Weather Icons 1-10-2018
Sunny Partly Cloudy/
Partly Sunny Cloudy Windy
Light Rain Fog Smoke Frost
Raining Thunderstorm Snowing Freezing Rain
Additional
Clear
Night
Weather Icons 1-10-2018
Sunny Partly Cloudy/
Partly Sunny Cloudy Windy
Light Rain Fog Smoke Frost
Raining Thunderstorm Snowing Freezing Rain
Additional
Cloudy
Night
Weather Icons 1-10-2018
Sunny Partly Cloudy/
Partly Sunny Cloudy Windy
Light Rain Fog Smoke Frost
Raining Thunderstorm Snowing Freezing Rain
Additional
Cloudy
Weather Icons 1-10-2018
Sunny Partly Cloudy/
Partly Sunny Cloudy Windy
Light Rain Fog Smoke Frost
Raining Thunderstorm Snowing Freezing Rain
Additional
Freezing
Rain
Weather Icons 1-10-2018
Sunny Partly Cloudy/
Partly Sunny Cloudy Windy
Light Rain Fog Smoke Frost
Raining Thunderstorm Snowing Freezing Rain
Additional
Frost
Weather Icons 1-10-2018
Sunny Partly Cloudy/
Partly Sunny Cloudy Windy
Light Rain Fog Smoke Frost
Raining Thunderstorm Snowing Freezing Rain
Additional
Fog
Weather Icons 1-10-2018
Sunny Partly Cloudy/
Partly Sunny Cloudy Windy
Light Rain Fog Smoke Frost
Raining Thunderstorm Snowing Freezing Rain
Additional
Weather Icons 1-10-2018
Sunny Partly Cloudy/
Partly Sunny Cloudy Windy
Light Rain Fog Smoke Frost
Raining Thunderstorm Snowing Freezing Rain
Additional
Partly
Sunny
Weather Icons 1-10-2018
Sunny Partly Cloudy/
Partly Sunny Cloudy Windy
Light Rain Fog Smoke Frost
Raining Thunderstorm Snowing Freezing Rain
Additional
Weather Icons 1-10-2018 REV. 1
# 1 Sunny# 0 Partly Sunny # 2 Cloudy # 7 Windy
# 10 Light Rain # 11 Fog # 12 Smoke # 13 Frost
# 4 Raining # 6 Thunderstorm
# 5 Snowing
# 3 Freezing Rain
# 8 Clear Night # 9 Cloudy Night
Snowing
Weather Icons 1-10-2018
Sunny Partly Cloudy/
Partly Sunny Cloudy Windy
Light Rain Fog Smoke Frost
Raining Thunderstorm Snowing Freezing Rain
Additional
Storms
Weather Icons 1-10-2018
Sunny Partly Cloudy/
Partly Sunny Cloudy Windy
Light Rain Fog Smoke Frost
Raining Thunderstorm Snowing Freezing Rain
Additional
Rainy
Weather Icons 1-10-2018
Sunny Partly Cloudy/
Partly Sunny Cloudy Windy
Light Rain Fog Smoke Frost
Raining Thunderstorm Snowing Freezing Rain
Additional
Mist Smoke
Weather Icons 1-10-2018
Sunny Partly Cloudy/
Partly Sunny Cloudy Windy
Light Rain Fog Smoke Frost
Raining Thunderstorm Snowing Freezing Rain
Additional
Sunny
System Operation
Auto Cooling Heating Fan OnlyEmergency
Heat Power Off
Auto
Cool
Heat
E Heat
E
Fan
OFF
Menu
Settings
Settings
Service
Service
Home
Away
Status
Status
Schedule
Schedule
Water
Heater
WiFi Signal
Connected
Strong Signal Connected
Medium Signal Connected
Low Signal Not
Connected
Home & Away
Home Away
Alerts
Alert
EcoNet®Smart Thermostat User Guide 5
> Return to Table of Contents
Standby Screen
If the thermostat has not been touched for 30 seconds, the screen dims and the standby screen activates displaying
indoor temperature and outdoor weather conditions. If an alert or alarm is present, the alert / alarm icon will be
displayed as well.
The motion sensor* will automatically wake the thermostat and activate the home screen as you approach.
*Motion Sensor may not be available on all units.
The standby screen can be turned off by disabling the back-light under basic
settings (Menu > Settings > Basic)
EcoNet®Smart Thermostat User Guide 6
> Return to Table of Contents
System Modes
The EcoNet Smart Thermostat will call for heat or cool based on the current settings and temperature. Cooling
and heating equipment may have a delay period before operation is enabled. The delay can be up to 5 minutes
(if the mode was changed right after equipment turns off). Status screen will show a “Hold-Off Timer”
for Equipment State.
Select the mode icon in the bottom right corner of the home screen to quickly
change the operating mode.
Select from Auto, Heat, Cool, E-Heat, Fan and Off.
Auto – Activates the heating or cooling system as required to keep your home
within the configured range of set point temperatures. Select the desired set
point, and then use the large adjustment buttons to set the desired temperature.
To adjust your cooling set point, tap the set point on the right - it will turn blue,
then adjust using the plus and minus buttons. The current temperature in the center
of the screen will temporarily be replaced by the set point in large font during
temperature adjustments.
Note: The default deadband or separation between the heating and cooling set points is 2 degrees.
Heat – Turns on heating when the current temperature drops below your set point
temperature. When there is an active call for heating, the words ‘Heating To’ will
appear above the heating set point.
(Heating set point screen)
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
75
Home
62 85
!
44%
80
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
BACK
Select a Mode
E Heat
E
Fan
OFF
Cool
Heat
Auto
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
75
Home
!
44%
62
80
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
BACK
Select a Mode
E Heat
E
Cool
Auto
Heat
Fan
OFF
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
BACK
Select a Mode
E Heat
E
Fan
OFF
Cool
Heat
Auto
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
75
Home
62 85
!
44%
80
EcoNet®Smart Thermostat User Guide 7
> Return to Table of Contents
System Modes (con’t)
Cool – Turns on cooling when the current temperature rises above your set point
temperature. When there is an active call for cooling, the words ‘Cooling To’ will
appear above the cooling set point.
(Cooling set point screen)
E-Heat (Heat Pump Systems Only) – The emergency heat option is a
manual setting, not an automatic function initiated by the heat pump thermostat.
The purpose of the emergency heat setting is to bring the backup heat source
online immediately to deliver 100% of the home’s heating demand while
simultaneously locking out the heat pump.
Fan Only – While in Fan Only mode, the heating/cooling equipment is turned
off. Use the plus or minus adjustment buttons to navigate between fan speeds from
Low to High. Press Mode again to reactivate a heating or cooling mode. Fan only
is a manual override of a set schedule. If a schedule is being followed, the fan
speed will return to the scheduled fan speed when you reactivate the heating/
cooling equipment. You can set continuous fan when in Heating, Cooling or Auto
mode from the Settings screen.
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
75
Home
!
44%
85
80
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
BACK
Select a Mode
E Heat
E
Heat
Auto
Cool
Fan
OFF
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
BACK
Select a Mode
E Heat
E
Fan
OFF
Cool
Heat
Auto
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
BACK
Select a Mode
E Heat
E
Fan
OFF
Cool
Heat
Auto
EcoNet®Smart Thermostat User Guide 8
> Return to Table of Contents
System Modes (con’t)
You can manually adjust the temperature from the Home Screen by touching the
plus and minus buttons. When the set point is being changed, the ring
will either turn blue or red—depending on the mode of operation—and the new
set point is displayed in the center of the screen. If Auto mode is selected, press the
lower left set point (red) for heat or lower right set point (blue) for cool.
(Cooling set point adjustment)
(Heating set point adjustment)
Connecting to WiFi
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
75
Home
62 85
!
44%
80
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
80 42%Home
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
63 42%Home
EcoNet®Smart Thermostat User Guide 9
> Return to Table of Contents
Connecting to WiFi
Your EcoNet Smart Thermostat supports WiFi 802.11 b/g/n. WiFi is normally configured during initial setup. You
may, however, be required to reconfigure the settings if your WiFi network settings change.
Connecting to WiFi will enable you to view the local weather and allow you to remotely manage your comfort and
receive critical alarms should something ever go wrong. To save time, we recommend having your home WiFi
network password and your Internet-connected smartphone or tablet close to the thermostat before you begin.
1. Download the EcoNet App and ensure your smartphone or tablet is already connected to your home
WiFi network.
2. Select ‘Create Account’ and follow the instructions.
3. On the EcoNet Smart Thermostat, tap the WiFi icon in the top right corner of the home screen (See Fig. 1).
4. Select ‘Get Started’ (See Fig. 2).
5. When ‘Ready to Connect’ appears, use the EcoNet App to complete the setup process (See Fig. 3).
6. Follow the in-app instructions to complete your connection.
7. You may be required to enter your network password.
8. Tap ‘Done’ to complete setup (See Fig. 4).
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
When "Ready to Connect"appears below use the
EcoNet app to complete the setup process.
Ready to Connect
WiFi Status
Almost There!
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
Congratulations! Your thermostat has successfully been
connected to Wi-Fi.
Done
Setup Complete!
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
Connect to Wi-Fi to receive local weather
and remotely manage your system with the
EcoNet mobile app.
Setup
Later
Get
Started
Wi-Fi Setup
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
75
Home
62 85
!
44%
80
(Fig. 1)
(Fig. 2)
(Fig. 3)
(Fig. 4)
EcoNet®Smart Thermostat User Guide 10
> Return to Table of Contents
Weather
Tap the weather icon on the home screen to display local weather conditions and view the hourly and
daily forecasts. The weather will be based on the current location or ZIP code used when creating your
EcoNet account.
Current Weather Conditions
24-Hour Forecast
6-Day Forecast
Menu Options
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
36
UNITS
34
Group 1
Refrigeration
!
TUE WED THU FRI S AT SUN
BACK
Forecast
75 80 75 70 7070HI
LO 55 60 55 50 5050
0% 0% 80% 0% 0%0%
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
75
Home
62 85
!
44%
80
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
Currently: HI: 92 LO: 77
5
50 %Rh
80 ºF
BACK
Today’s Weather
MPH, N
FORECAST
12 pm 6 pm 12 am6 am
75 80 5065
5 , N 0 , N 10 , N5 , N
80% 0% 0%0%
EcoNet®Smart Thermostat User Guide 11
> Return to Table of Contents
Menu Options
Tap the Menu icon in the bottom left corner of the home screen to easily
view and configure your personal and system settings.
Settings
Settings (Menu > Settings)
Adjust system-level settings and preferences, from customizing your away
temperatures to scheduling a vacation. Tap the Menu icon from the home screen
and then tap Settings.
Basic (Menu > Settings > Basic)
Adjust thermostat or basic equipment settings and preferences.
Follow Schedule – If a programmed schedule is desired, set to “Yes.”
Alarm Beep Enable – Sounds an audible alarm tone shall a critical alarm
condition occur.
Screen Lock– To lock the main screen from any changes, enable the lock. To
unlock, enter the Basic settings menu again and set Screen Lock to “No.” This
locking function prevents any changes except changes made from within the
Basic Settings.
Temperature Display – Change your indoor temperature and set points
between Fahrenheit and Celsius.
Schedule Override Time – While a schedule is running, if a set temperature
change occurs on the main screen, the change will be in effect for this amount of
time. The default is 2 hours. You can customize between a minimum override of 1
hour and a maximum of 8 hours.
Auto Changeover Time – When the system is in Auto mode, this is the
amount of time demand must exist in the opposite mode (cooling or heating) in
order for the system to switch to that mode. The default is 5 minutes. The setting is
configurable between 5 and 60 minutes.
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
BACK
Settings
Installer
Away
Humidity
Time
Basic
Vacation
Fan
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
BACK
Menu
Settings Schedule Status
Water Heating
Service
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
75
Home
62 85
!
44%
80
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
Follow Schedule?
Alarm Beep Enable?
Screen Lock?
Temperature Display
Schedule Override Time
Auto-Changeover Time
BACK
Basic Settings
Yes
Fahrenheit
2 hours
5 min.
MORE
No
No
EcoNet®Smart Thermostat User Guide 12
> Return to Table of Contents
Settings (con’t)
More >
Set Point Deadband – This is the minimum difference between heating and
cooling set points in Auto mode. The default is 2 degrees. This setting is
configurable between 0 and 6 degrees. A 0 degree deadband means your system
will switch between heating and cooling to maintain the specified set point. The
smaller the deadband setting the more frequently your system will switch between
heating and cooling.
Temperature Oset – This is an offset applied to the displayed room
temperature. A negative offset will cause the displayed indoor temperature to
be less than the sensed temperature. A positive offset will cause the displayed
temperature to be higher than sensed temperature.
Relative Humidity Oset – This is an offset applied to the indoor relative
humidity. A negative offset will cause the displayed relative humidity to be less
than the sensed relative humidity. A positive offset will cause the displayed relative
humidity to be higher than sensed relative humidity.
Note: You should allow the thermostat to calibrate in the conditioned space for 30 minutes before
adjusting offsets.
Room Sensor Selection – You can wire a remote 10K temperature sensor*
to the EcoNet Smart Thermostat. If a remote temperature sensor is connected, you
can choose to use the remote sensor, internal sensor on the Smart Thermostat or an
average between the two for current indoor temperature.
*Optimized for use with an Aprilaire 8051 indoor temperature sensor.
Proximity Sensing** – Selecting ‘No’ will disable the motion sensor. To
activate the thermostat, you will need to tap the screen.
**Motion Sensor may not be available on all units.
Smooth Arrival – The thermostat will start recovery at the optimum time to
ensure the set point is reached at the scheduled time. If a setback in temperature is
scheduled, for either cooling or heating, the set temperature is ramped to the next
scheduled set temperature 60 minutes before the next time period.
Backlight Enabled – When the thermostat is not being used it will enter
standby mode. The default screen brightness in standby is 1%. You can turn off the
Backlight when in standby by selecting “No.”
Time & Date (Menu > Settings > Time)
Set the current time and date. Your schedule times, vacation events and weather
forecast will be based off the time entered on this screen. It is important to ensure
the correct date and time are programmed before
setting your schedule.
DST – At the bottom of this screen you can elect to enable or disable
daylight savings time.
Settings (con’t)
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
BACK
Time and Date
2 : 38 pm
Jan 29 2018
D.S.T.
Accept Yes
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
BACK
Settings
Installer
Away
Humidity
Time
Basic
Vacation
Fan
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
BACK
Basic Settings
Backlight Enabled? Yes
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
Set Point Deadband
Temperature Offset
Relative Humidity Offset
Room Sensor Selection
Proximity Sensing?
Smooth Arrival Enabled?
BACK
Basic Settings
Yes
Yes
2º F
0.0º F
0.0 %
Internal
MORE
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
Set Point Deadband
Temperature Offset
Relative Humidity Offset
Room Sensor Selection
Proximity Sensing?
Smooth Arrival Enabled?
BACK
Basic Settings
Yes
Yes
2º F
0.0º F
0.0 %
Internal
MORE
EcoNet®Smart Thermostat User Guide 13
> Return to Table of Contents
Settings (con’t)
Humidity Settings (Menu > Settings > Humidity)
Control your home’s humidity settings for more ideal comfort.
Dehumidification (Menu > Settings > Humidity)
Enable Dehumidication – The system will attempt to reduce humidity in
cooling mode by reducing fan speed and over-cooling the space (when allowed
by the Over-Cooling setting). The system will only reduce airflow if the room
temperature is within one degree of set point, otherwise, full cooling airflow will
be performed.
Dehumidify Set Point – The indoor relative humidity to be controlled to while
in cooling mode.
Over-Cooling Amount – The system will activate cooling, and possibly over-
cool the space by the desired number of degrees to improve dehumidification
performance in an effort to reach the dehumidify set point. The factory setting for
over-cooling is zero (no over-cooling) and can be adjusted up to 5 degrees of
over-cooling.
Dehumidify Drain Timer – At the end of a cooling cycle, if set, the
continuous fan setting will be turned off for the selected amount of time in order to
drain water from the indoor coil.
Humidification (Menu > Settings > Humidity > Humidification)
Enable Humidication – The system can control a humidifier attached to the
furnace or air handler to increase humidity in the space. It is important to note you
cannot humidify above the dehumidification set point.
Humidication Set Point – This setting allows you to choose the indoor
relative humidity desired, under which humidification will activate. The default is
humidification set point is 30% and is configurable between 15 and 45%.
Humidify During – Select the modes in which humidification will be
performed. Humidification can occur during heating, continuous fan and/or
cooling mode.
• Heat – Humidifier will operate with equipment during Heat if a
humidification demand is present.
• Heat/Fan – Humidifier will operate with equipment during these modes if a
humidification demand is present.
• Heat/Fan/Cool – Humidifier will operate with equipment during these
modes if a humidification demand is present.
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
BACK
Settings
Installer
Away
Humidity
Time
Basic
Vacation
Fan
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
Enable Humidification?
Humidify Set Point
Humidify During...
Smart Control
Humidity With Fan
BACK
Humidification
30 %
Heat
Off
Off
No
75
Home 44%
72
80
Enable Dehumidification?
Dehumidify Set Point
Over-Cooling Amount
Dehumidify Drain Timer
BACK HUMIDIFICATION
Dehumidification
52 %
0 ºF
5 min.
Yes
EcoNet®Smart Thermostat User Guide 14
> Return to Table of Contents
Settings (con’t)
Smart Control – Smart Control is used to reduce or prevent water condensation
on the inside of windows while humidifying in the winter season. The control
monitors indoor and outdoor temperatures and reduces the humidification
percentage according to the Smart Control level chosen by the user. Start out with
the Low setting. If objectionable condensation occurs on windows, choose the
Medium or High setting.
Humidify With Fan – If there is a call to humidify and the fan and heating/
cooling are off, the fan will be forced on to humidify. Select the desired fan speed
from Low to High.
Note: Humidification is only available if a humidifier is installed.
How to test a humidier
Adjust the humidify set point up to ‘TEST’, select Humidify during “Heat/Fan”, then turn on a continuous fan speed on
the Fan screen under Settings. This should force the humidifier to run. This setting will last for 30 minutes, where the
maximum setting will return to 4% below the dehumidification set point.
Away Settings (Menu > Settings > Away)
Your system will follow the customized heating, cooling and fan settings when
you place your system into ‘Away’ mode. The system can be placed into Away
by selecting the Home icon (closed door) on the home screen. Once the system is
placed into Away mode it will remain until canceled. Simply tap the Away icon
(open door) to exit Away mode. The system will resume the schedule or return to
the previous settings if a schedule is not being followed. You can also exit Away
by increasing or decreasing the temperature.
Note: If your system is in Cool or Heat when placed into Away mode your system will only manage to
the respective Away set point.
Vacation (Menu > Settings > Vacation)
The Vacation screen allows you to preschedule desired heating, cooling and fan
settings when you are going to be away for an extended time.
To schedule your vacation, select the time, month, day and year and then use the
up and down arrows to set desired start and end dates.
Note: You will need to set the vacation end time and date before you can set its start.
Select each set point and fan speed and then use the up down arrows to set to
your desired vacation conditions. We recommend setting the fan speed
to Auto.
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
Enable Humidification?
Humidify Set Point
Humidify During...
Smart Control
Humidity With Fan
BACK
Humidification
30 %
Heat
Off
Off
No
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
BACK
Settings
Installer
Away
Humidity
Time
Basic
Vacation
Fan
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
BACK
Vacation Settings
85º Auto65º
Start:
End:
Vacation
02:00 pm Jan. 29 2018
02:30 pm Feb. 10 2018
Yes Water
Heater Yes
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
BACK
Settings
Installer
Away
Humidity
Time
Basic
Vacation
Fan
EcoNet®Smart Thermostat User Guide 15
> Return to Table of Contents
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
77
Vacation
36%Away
64
!
80
Settings (con’t)
Vacation Activated – A Vacation will be indicated by the word ‘Vacation’
above the current temperature on the home screen and an active Away button.
Tap Vacation on the home screen to cancel and resume schedule or return to
previous settings.
Your HVAC equipment will automatically follow a vacation event. If you have a
connected water heater, you have the option to have your water heater follow the
vacation event; simply toggle the button to Yes.
Fan (Menu > Settings > Fan)
Continuous Fan - Chose from one of 5 speeds to run continuous fan. This
setting allows the fan to continue circulating air in between calls for heating or
cooling. If the system is following a schedule the fan speed presented will match
the speed set in your schedule. You can temporarily override the scheduled fan
speed here. You will notice the copy on screen changes to ‘Fan Speed Override’.
The override will follow the ‘Schedule Override Time’ set in Basic Settings.
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
BACK
Fan Settings
Fan Speed Override: Med. Lo
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
BACK
Settings
Installer
Away
Humidity
Time
Basic
Vacation
Fan
EcoNet®Smart Thermostat User Guide 16
> Return to Table of Contents
75
Home 44%
72
80
BACK
Schedule
Morning
Copy Day Cancel
05:30 am Auto
Day 07:00 am Auto
Evening 07:30 pm Auto
Night 10:30 pm Auto
70º
62º
70º
62º
78º
MTWTFSS
85º
78º
78º
75
Home 44%
72
80
BACK
Schedule
Morning
Copy Day Cancel Paste Day
05:30 am Auto
Day 07:00 am Auto
Evening 07:30 pm Auto
Night 10:30 pm Auto
70º
62º
70º
62º
78º
MTWTFSS
85º
78º
78º
Schedules
Tapping Menu > Schedule will present your current schedule. First, please ensure
the correct date and time settings have been entered under Settings. To edit the
schedule for a day, tap the day of the week you want to edit. Tap the day part
(morning, day, evening or night) time and use the up and down arrows to set the
desired start time. Next tap the heat set point, cool set point and/or fan speed
for each day part and use the up and down arrows to change to your desired
settings. Your system will follow your preferred settings until the next day part start
time is reached. If Smooth Arrival is enabled under Basic Settings, your system will
start recovery up to 60 minutes early to ensure the set points for the next scheduled
day part are reached at the scheduled time.
To copy a day’s schedule to another day, tap “Copy Day”, then select the day(s)
you wish to copy to, then tap “Paste Day.” You can select “Cancel” to cancel the
paste day operation.
When a schedule is being followed and a manual adjustment is made overriding
the schedule, a Resume Schedule option will be displayed above the current
temperature on the home screen. The schedule will be temporarily overridden
according to the schedule override time under Basic Settings. The default schedule
override time is two hours. Your schedule will automatically resume once the
override expires. You can also resume the schedule by tapping ‘Resume Schedule’
on the home screen.
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
BACK
Menu
Settings Schedule Status
Water Heating
Service
EcoNet®Smart Thermostat User Guide 17
> Return to Table of Contents
Status
Tapping Menu > Status will display the connected communicating
equipment, thermostat mode and the equipment operating status.
Selecting Furnace, Air Handler or AC/HP on the Status screen will display each
piece of equipment’s current operating status and historical cycles and run times.
Furnace Status – Displays detailed furnace operation information including two
week and lifetime cycles, as well as run time hours.
AC/HP Status – Displays detailed AC/HP operation information including two
week and lifetime cycles, as well as run time hours.
Air Handler Status – Displays detailed air handler operation information
including two week and lifetime cycles, as well as run time hours.
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
BACK
Status
Inside Temp : 77º Outside Temp : 80º
Inside Rel. Humidity : 39%
Thermostat Mode : Off
Equipment Operating Status : Off
Furnace AC/HP Air Handler
MORE
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
BACK
Furnace Status
Current -> Capacity : CFM :0% 0
0
0
0
0
0
0
0
0
0
0
0
0
0
n/a
0
0 days
0
0 º
offoff
0 º80º
off
RPM :
G : Aux 1 : Aux 2 :
Outside :
Lo Heat Hi Heat Blower Powered
0.00 in.
Supply : Return :
Temperatures ->
Discrete Inputs ->
Static Presure :
Two Week Cycles :
Two Week Hours :
Lifetime Cycles :
Lifetime Hours :
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
BACK
AC/HP Status
Unit Type : var-speed 2 tons
1
0
2
0
1
0
6
2
0Utility Input : Disabled
Lo cool Hi cool
AC
68°
Outside Temp:
Hold-off Timer:
Two Week Cycles :
Two Week Hours :
Lifetime Cycles :
Lifetime Hours :
MORE
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
BACK
AC/HP Status
Inverter Current Speed ………… 0 RPM
Crankcase Heater Temp ……… 68.7°
Superheat ……………………… 60.0°
Suction Line Temp …………… 9.1°
Suction Pressure ……………… 4.2 PSIG
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
BACK
Air Handler Status
Current -> Elec. Heat : CFM :off 0
0
0
3
0
0
0
3
6
20
0
112
115
4
n/a
20
85 days
0
--
offoff
--
off
RPM :
G : Aux 1 : Aux 2 :
Lo Heat Hi Heat Blower Powered
0.00 in.
Supply : Return :
Temperatures ->
Discrete Inputs ->
Static Presure :
Two Week Cycles :
Two Week Hours :
Lifetime Cycles :
Lifetime Hours :
MORE
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
BACK
Air Handler Status
EXV Current Position ………… 58.2%
EXV Current Superheat ……… 10.1°
Suction Line Temp …………… 61.1°
Saturated Suction Temp ……… 51°
Suction Pressure ……………… 145 PSIG
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
BACK
Menu
Settings Schedule Status
Water Heating
Service
EcoNet®Smart Thermostat User Guide 18
> Return to Table of Contents
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
BACK
Service
History
Alerts
Equip.
Support
Current
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
BACK
Menu
Settings Schedule Status
Water Heating
Service
Service
Selecting Menu > Service from the home screen will display current alarms, alarm
history, service alerts, contact info and equipment info.
Current – Shows any alerts or alarms that are currently active. When an
equipment alert/alarm is present, an alert/alarm icon will appear in the upper
right corner of the home screen, and the alarm beep will sound if enabled. Select
the alert/alarm icon on the home screen to quickly view the alert/alarm and a
brief description.
History – Shows a list of the past eight alerts/alarms with the time and
date stamp.
Alerts – Allows you to set time-based maintenance reminders for a service
call, humidifier pad and UV light replacement. Toggle to ‘No’ to disable service
reminders. You can also change the time for the alert. If a Service Alert is present,
the item will have a “reset” label next to it. Tapping “reset” will clear the alert and
start the maintenance timer over.
•
Service Call – Generates an alert telling the homeowner that regularly
scheduled maintenance is due.
•
Air Filter – If a common ‘media’ filter is used, our EcoNet system is smart
enough to detect and alert you when it is time to replace the air filter. You can
easily see how much life your air filter has left by checking the percent used. If
no alert is sent in a 12 month period the system will automatically remind you
it is time to replace the air filter.
If an Electronic Air Cleaner (EAC) filter is used the reminder will revert back to
a time based reminder. The default is set to 6 months.
•
Humidier Pad – Reminds you to clean or replace the humidifier pad
based on your chosen interval.
•
UV Lights – Generates an alert indicating that it is time to clean or replace
the lamp if the HVAC system uses a UV lamp for air purification.
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
BACK
Alarm History
14:47:01 01/29/18
A021_A Restricted airflow detected. Possible frozen coil
20:33:40 02/02/18
A929_O 240V Missing or Inverter Comm Failure 16
Clear History
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
Service Call
12 left
Air Filter
55% used
Humidifier Pad
12 left
UV Lights
12 left
BACK
Service Alerts
12 months
12 months
12 months
Yes
Yes
Yes
Yes
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
BACK
Service
History
Alerts
Equip.
Support
Current
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
BACK
Service
History
Alerts
Equip.
Support
Current
EcoNet®Smart Thermostat User Guide 19
> Return to Table of Contents
Service (con’t)
Support – Allows you to input your contact information for your preferred
contractor or install professional (company name, phone number and email
address), so that it’s always available should you run into any issues. Simply use
the on-screen keyboard to enter the appropriate contact information. Any contact
information you enter will also be available in the EcoNet App.
Note: You should always contact your preferred contractor or install professional regarding alerts/
alarms, performance issues or other questions specific to your equipment.
Additionally, the WiFi and App Support phone number is permanently stored for
easy access. EcoNet Support is available for help with WiFi connectivity, App
issues and basic operation of the EcoNet Smart thermostat.
Equip. – Displays the model, serial number and software version of all your
connected equipment
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
Phone: 8004342794
BACK
Service Contact Info
Wi-Fi and App Support: 800-434-2794
Company: Company Name
E-mail: Contractor E-mail
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
BACK
Equipment Information
Thermostat SW Version . . . . . . . . . . AC-RHUI-03-00-27
Furnace Model Number. . . . . . . . . . . U98VA100M521USA
Furnace Serial Number . . . . . . . . . . . W301717130
Furnace SW Version. . . . . . . . . . . . . . S9242F2020 3.03 1.02
Outdoor Unit Model Number. . . . . . . UP2024AJVCA
Outdoor Unit Serial Number . . . . . . . W211742802
Outdoor Unit SW Version. . . . . . . . . . AC-VSHP-00-01-57
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
BACK
Service
History
Alerts
Equip.
Support
Current
75
Home 44%
72
80
75 44%
80
65
Away
Resume Schedule
BACK
Service
History
Alerts
Equip.
Support
Current
EcoNet®Smart Thermostat User Guide 20
> Return to Table of Contents
Table of contents
Languages:
Other EcoNet Thermostat manuals
