Ensure power is OFF
Install the Fixtures
Connect Fixtures and Power
Using wire nuts, connect line, neutral, and ground within the stake connection box or the junction box.
Junction Box
Powered
Stake
Use DBR Waterproof Splice
Wire Connectors
GFCI Outlet
Power Supply
Conduit
Installation Considerations
Power Consumption 12.7 watts
Operating Temperature -4°F to 104°F (-20°C to 40°C)
Operating Voltage 100-120VAC, 220-240VAC, 50-60Hz
Weight 34.9 oz / 990 g
Dimensions W 5.5” x H 3.5” x D 2.0” / (140 mm x 90 mm x 50 mm)
Read and understand the installation instructions before attempting to install or use the fixture.
Only use fixtures with voltage for which it is rated. Do not exceed the specified voltage and current input.
Do not use fixture if the housing, lens, or power cable are damaged.
Fixtures have line voltage risk of shock and no user serviceable parts. Do not attempt to open.
Do not hot swap. Ensure that power is off before connecting or disconnecting fixtures in the series.
Ensure that main power supply is off before installing or wiring a fixture.
LED Radiation. Do not view directly with optical instruments. Class 1M LED Product
Accessories
Barndoor
Hood
*The Junction Box shall
be compliant with IP66
requirements*
© 2012 EcoSense Lighting Inc. All rights reserved.
Specifications subject to change without notice.
Visit www.ecosenselighting.com for the most current specifications.
EcoSense, the EcoSence logo, and EcoSpec are trademarks of EcoSense Lighting Inc.
(V. 5.1-2012)
www.ecosenselighting.com
