Edge INSIGHT CTS3 User manual
2
Table of Contents
3 Read Me
3 Safety Warning & Caution
4 Safety Guidelines
5 FCC Compliance
7 Quick Start
7 In-Cab Display
8 Accessories
9 Cable Installation
9 Windshield Mount Installation
10 Touch Screen
11 Main Menu
12 Update Software
12 Downloading Update Agent 1.0
13 Product Updates
14 Performance Tests
14 0-60, 0-100, 1/4 Mile, & 1/8 Mile Tests
16 Settings
16 Display & Audio Settings
17 Device colors
18 Wi-Fi Setup
19 Check for Updates
20 Unit of Measure
21 Tire Size
22 Restore Default Settings
22 Restore Default PIDs
22 Alert Settings
23 Gauges & Logging
23 Gauge Layouts
25 Theme Settings
26 Wallpaper
28 Individual Gauge Setup
230 Pitch/Roll G-Force Screen
32 Recording
32 DataViewer Download
33 DataViewer
34 EAS Accessories
34 EAS Overview
35 EAS Device Instructions
38 Diagnostics
38 Trouble Codes
39 Manual Regeneration
40 Mobile Regeneration
40 Injector Balance Rates
41 Help/Info
41 Device Info
42 Tutorials
42 F.A.Q’s
43 Tech Support
3
Safety Warning & Caution
Read Me
Throughout this User Manual you will see important messages
regarding your safety or the protection of your vehicle. These messages
are designated by the words WARNING, CAUTION, or NOTICE.
A WARNING indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
A CAUTION indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
NOTICE
A NOTICE indicates a condition that could cause damage to the product
or your vehicle.
The product you have purchased is a high-performance product. As
such, it does present some risks of which you should be fully aware. Do
not use this product until you have carefully read the following safety
information and the Owner Agreement.
NOTE: After the display has been installed, the following warning
message will appear when powered on. Swipe the screen upward
to read the full disclamer.
If you agree with the disclamer, select Yes to continue.
WARNING: Prior to use, read the User Manual. Misuse of the
device could result in trac accidents, death or serious injury, and/or
damage to your vehicle. POWERTEQ IS NOT RESPONSIBLE FOR AND
SHALL HAVE NO LIABILITY TO YOU FOR ANY CLAIMS ARISING OUT OF OR
RELATING TO ANY MISAPPLICATION OF THE CTS3, CUSTOM TUNES,
IMPROPER USE OF CALIBRATIONS, MALFUNCTION OR LACK OF LEGAL
COMPLIANCE FOR CUSTOM PROGRAMS CREATED BY THIRD PARTIES.
DO YOU AGREE?
WARNING
CAUTION
4
Safety Guidelines
Before using device, read and understand the user manual, including
these additional safety instructions. Failure to do so could result in
DEATH or SERIOUS INJURY.
• Do not exceed legal speed limits on public roadways. Violating trac laws is
dangerous and could result in injury or vehicle damage or both.
• Use any enhanced speed capabilities of this product only in closed circuit, legally
sanctioned racing environments expressly for this purpose. Violating trac laws is
dangerous and could result in injury or vehicle damage or both.
• Do not operate the device while driving. Distracted driving could result in trac
accidents, death or serious injury, and/or damage to your vehicle.
• Always perform all adjustments or changes while stopped. Changing a setting while
driving can interfere with your attention to roadway conditions and could result in
injury or vehicle damage or both.
• Do not stack products. “Stacking” performance-enhancing devices or other
improper installation can cause power train failure on the road. Other products may
have features incompatible with your device. Follow all installation and operating
instructions.
• Some modications may aect other parts of your vehicle. For example, if you
remove/adjust the speed limiter in your vehicle, be sure your tires and other
components are rated for the increased speeds they will have to withstand. Not
doing so can lead to loss of vehicle control. Modify the speed limiter only for use
in closed circuit, legally sanctioned racing environments, not for use on public
roadways.
WARNING
NOTE: The stickers included in some products apply to products that have
recieved CARB exemption for emissions compliance.
This product may meet the emissions compliance requirements of the California
Air Resources Board and Federal Environment Protection Agency. If so, it is legal
for sale and use on pollution-controlled vehicles operated on public streets and
highways. The device must be installed and operated according to the instruction
provided in this user manual. Included with these compliant products is a sticker
for you to keep in your vehicle. You can either adhere it somewhere on the
vehicle (e.g., the inside end of driver’s door) or simply store it in your glove box.
The purpose of these stickers is to inform anyone who may have questions
regarding the use of this product and how it aects emissions. For example, it
would be something to show an emissions technician if questioned when taking
your vehicle in for an emissions check to let him/her know the product is CARB
emissions compliant.
5
Contains FCC ID: TFB-1003
Contains IC: 5969A-1003
Edge Products CTS3 Programmer
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modications to this device not expressly approved
by Edge Products, LLC could void the user’s authority to operate the
equipment
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and on,
the user is encouraged to try to correct the interference by one or more
of the following measures:
RF Exposure
This equipment complies with radiation exposure limits set forth for
an uncontrolled environment. This equipment is in direct contact
with the body of the user under normal operating conditions. This
transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.
FCC Compliance
6
Cet equipment est conforme aux limites d’exposition aux
radiations dans un environnement non controle. Cet equipment
est en contact direct avex le corps de l’utilisateur dans des
conditions de fonctionnement normales. Cet emetteur ne doit
pas etre co-localisees ou operant en conjunction avec tout autre
antenne ou transmetteur.
Industry Canada
This device complies with Industry Canada licence-exempt RSS
standard(s). Operation is subject to the following conditions: (1)
this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device.
Le present appareil est conforme aux CNR d’Industrie Canada
applicables aux appareils radio exempts de licence. L’exploitation
est autorisee aux deux conditions suivantes: (1) ll’appareil ne
doit pas produire de brouillage, et (2) l’utilisateur de l’appareil
doit accepter tout brouillage radioelectrique subi, meme si le
brouillage est susceptible d’en compromettre le fonctionnememnt.
FCC Compliance Cont’d
7
Quick Start
In-Cab Display
Mount
Receptacle
USB Port
HDMI
Port
Light
Sensor Touch Screen
LEDs
8
Accessories
Iso-
propyl
Windshield Suction Mount Alcohol Wipe
OBDII to HDMI Cable
OBDII
EAS
HDMI
Zip Ties USB Cable
9
Cable Installation
1 Locate the OBDII port. The
connector is typically found
directly below the driver side
dash console.
2 Plug the OBDII connector into
the vehicle port.
3 Route the HDMI connector
up the driver side dash. (On
most vehicles, the side panel
may be removed to expose the
underside of the dash for easier
routing. Leave panel open until
the display is installed.)
Windshield Mount Installation
1 Use the alcohol wipe to
clean the windshield in the area
you plan to place the suction
cup. Allow the glass to dry
completely.
2 Firmly press and hold the
suction mount against the glass.
3 Rotate the Cam Lever
towards the glass to create the
suction.
4 Plug the HDMI connector into
the back of the device and slide
the device onto the mount.
10
Touch Screen
Press/Select Vertical Swipe
Use these gestures to navigate and control the display.
Drag up or down menus, and
scroll through menu items.
Select options, input val-
ues, enter menus, etc.
Horizontal Swipe
Scroll through gauge screens
or change option values.
Double Tap
12
Enter sub-menus such as
gauge editor.
Table of contents
