Ednet 33040 User manual

AMBIENT LED MOOD LIGHT WITH
BLUETOOTH®SPEAKER
Manual 33040

Be sure to aware the following guidelines when using 33040
1. To turn on the power switch at the bottom of 33040
There are 3 functions (Diagram 3):
Left: BLUETOOTH®speaker on
Middle: Table lamp usage
(Controlling different colors of LED light)
Right: Off Power
2. Touch or slide the control key of LED light (Diagram 1) –
“color control” to adjust the brightness of the lamp
3. Touch one time on “Mode key” for white light only
Touch twice on “Mode key” for the colors of LED light.
4. Power key for “on/off switch”
Diagram

OPERATING INSTRUCTIONS
Function of table lamp ON/OFF
ON:
Switch to the middle “light bulb” on the button, 33040 will apply to the
table lamp function. In addition, the LED indicator lights (below picture) and the
table lamp will light-up for 2 seconds at the same time, and then the lights off.
OFF:
Please do a long pressing the on/off key for 1~2 seconds to turn off.
Charging
When 33040 is out of battery, the indicator light and table lamp will not shine. If
this situation occurs, please put 5V power supply cord to DC charging port for
charging (Diagram 2). The red light will start flashing during the charging
process.
The red light will shine for a while after charging is completed. You can press
on/off key to start the table lamp while it’s shining.
Controlling White Light of Table Lamp
There are 2 blue LED lights as indicators to present controlling the brightness of
white light. By sliding the touch panel area, the first blue LED light will be adjusted
as medium light, and then the second blue LED light will be stronger light.
Controlling Different Colors of LED Mood Light
For the symbols of controlling color gradients, changing colors of light is from left to
right by sliding the touch panel area.
In the beginning, touch the “mode key”, the LED lights will be switched into the
state of automatic mode, which can be adjusted into favorite color on the automatic
status by sliding on the touch area. (Diagram 1)

Function of BLUETOOTH®
There is a sound indication when the device is switched to BLUETOOTH®mode.
Then a pairing name of 33040 would be shown on the smart devices such as
mobile phone or tablet PCs.
Attention
1. Please charge the product before use. Do not charge while using
BLUETOOTH®status. In this state, the charging time will be extended.
2. Please do not place the product close to the fire or water to avoid unnecessary
accidents
3. Please charge fully, if it doesn’t use for a long time. Keep the product in a dry
place, and charge it once every 3 months
4. Please do not touch more than two functional keys, which is easily to get freeze
or stop responding
5. It needs at least 1 second to respond each operation. If touch/press sliding
area too fast, some errors may occur
6. When the product is abnormal, please press power button more than 3
seconds and then re-charge it
Features
BLUETOOTH®2.1+ EDR, range up to 10 meters
LED white light & color changing light (RGB)
Touch switch can select color & adjust the brightness of the lamp
Support automatically color changing mode
Built-in rechargeable battery capacity with 1,000 mAh
Frequency range: 30Hz-17KHz

A
udiopowerRMS:3W
Charging time: about 2.5 hours
Working time
BT speaker ONLY: about 3 hours
White light ONLY - 1st level brightness: about 6 hours
White light ONLY - 2nd level brightness: about 3 hours
White light ONLY - 3rd level brightness: about 2 hours
White light ONLY - 4th level brightness: about 1.5 hours
Color changing light ONLY: about 3 hours
BT speaker+ color changing light: about 2 hours
Package Contents
AMBIENT LED MOOD LIGHT with BLUETOOTH®SPEAKER x 1
USB charging cable x 1
Manual x 1