EF EFCF 108EP User manual

User manual
1-9

Thank you very much for purchasing EF
Chest Freezer.Please read this manual carefully
before using your new freezer, and keep safe for
future reference.
Contents
Warnings & Cautions for Safety...................1-3
Parts Names................................................3
General Information.....................................4
Installation..................................................5
Reminders During Use.................................6
Operation Method .......................................7-8
Trouble-shooting.........................................9
...
Please check the following points when you find the chest freezer
The inside is not
cool enough
Loud noise is
heard
Trouble-shooting
is not working properly.
Check if the power lamp is off
The Power Plug is unplugged from the socket.
A power failure has happened.
A domestic fuse or breaker has been out.
Has the installation been properly done?
Is the Temperature control in the proper position?
Is the chest freezer in direct sunlight?
Do you frequently open-close the foam door?
Have you stored too much stuff at one time?
The inside is not
cool at all
Is the floor firm enough?
Is the chest freezer rattling?
freezer and the wall?
behind the chest freezer?
Is there enough space between chest
Is there a container or other object dropped
There is a possibility of condensation
on the body, the door or on the packing, when
humidity is quite high.It is the same situation as
condensation on a glass with cold water.There is
no problem.
It is not a problem. It is the sound of refrigerant
(liquid for cooling the freezer).
There is
condensation on
exterior side of the
chest freezer
Sound of water
flowing
Exterior of the chest
freezer is hot
It is because pipes are equipped to prevent the
interior f rom condensation and release the heat.
It does not affect the food inside
It may become hot especially in summer or at the
beginning of the operation
*
-9-
Check these points above and if you still have any trouble.
Please contact our Service center/ authorized Service dealer.

-8- -1-
1. Be sure to connect the power plug into proper
AC 220-240V socket.
2. Use a separate 13A socket for connecting the
freezer.
Improper socket may result in fire or cause an
electric shock.
Using the same socket with other appliances
may cause heat and catch fire.
damaged cord.
3.Never damage the power cord or use a
It may catch fire or cause an electric shock if
Cord.
You stamp on it, pull, twist or bend the power
cleaning or changing a lightbulb inside.
4. Be sure to disconnect the power plug when
It may cause a risk of electric shock if you
change it with the power plug on.
Never connect or disconnect the power plug
with wet hand; it may cause an electric shock.
5. Be sure to disconnect the Power Plug in
case not using chest freezer for a long time.
It prevents electric shock, leakage or fire which
are caused by weakening insulation.
The following are not considered as problems in the unit:
1.
2.
refrigerants.
3.
The refrigerating system runs for a long time when the freezer is
used for the first time or more articles are put into it.
Sound of running water. This is merely the sound of running
Condensation is normal when ambient humidity is high. Drops of
water appear on the exterior wall of the cabinet.
Warnings & Cautions for Safety
AC 220-240V
socket
,
Use it s own
socket
Ensure to plug
until it joints
Forbid
Forbid
Unplug from
the socket

-7-
Operation method
To freeze is the basic work condition for
6. Hold the Power Plug when you pull it out or plug in.
I t may damage the Power cord and can c ause risk of short circuit
or electric shock if you pull the cord to disconnect the power.
7. Be sure not to splash or pour water.
It may cause risk of short circuit or electric shock.
When chest freezer operates abnormally (burning smell etc), pull
out the power plug to disconnect the power and stop the operation.
electric shock or catching fire.
If it keeps operating under the abnormal condition, it can result in
Never dismantle, repair or remodel.
It may cause a risk of accidental fire or a malfunction and result in
personal injury.
Caution
1. Never store bottles or cans.
The substance freezes and the container can be broken; which may
cause personal injury.
2. Never store flammable items.
It may cause explosion. Never store . Benzine, LP Gas,
Alcohol or Adhesives.
3. Never store medicine or chemical material.
ltems that need strict supervision of temperature cannot be
preserved in domestic chest freezer.
Do not install the chest freezer in very humid place where it may
get wet.
lt may cause leakage by weakening insulation.
5. Do not touch food or (especially metalic) containers in the chest
freezer by wet hand, lt may risk you to get cold injury.
-2-
the freezer. In such conditions, the knob of
"7" is in "strong cold" work condition. If fast
the thermostat should be placed to the freezing
range of "1" ~ "7" (usually set at "5"). Position
"1" is in "weak cold" work condition and position
set to the position "7" after the articles are put into the freezer. Turn it
to its original position when the articles are frozen. Do not fast-freeze
for more than 4~5 hours or it is not good for the refrigerating system.
freezing is needed for articles, the knob of the thermostat should be
Work condition:
A green light and red light are installed on
The red light is power indicator which lights up when power is on. The green
light is on when the compressor is running, or off when compressor is not
running. This makes it convenient to determine if there is power or not and
if the refrigerating system is working or not.
the temperature control panel .
CO O LING
4.
Forbid
Detach the door
Forbid
Forbid
Forbid
Forbid
Forbid
8.
9.

Reminders During Use
Parts Names
1.
-6-
-3-
Your freezer may not confirm with figures illustrated due to product
modifications.
6.
Pipes) on the back.
lt may cause burns with heat radiation during
operation if you touch them.
Do not touch the machinery parts (especially a
compressor and
7. Do not put your hand(s) under the chest freezer.
lt may cause you injury by an iron plate underside.
8. Be sure to hold the underside firmly when carrying
the chest freezer. The foam door may be detached
if you carry the chest freezer by holding metal
fittings or the door and it may slip from your hands,
which may risk in injury.
Do not put flammable or explosive
articles, and corrosive or volatile
organic solvents into the freezer
So as to prevent accidents and to
protect freezer cabinet from corrosion.
2. Temperature of the freezer should not be too high. Articles may be
3.
breakage.
4. To reduce power consumption,avoid keeping
door open for a long time.
5. If the frost on the interior walls is more than
5mm,defrosting should be done.
Method of defrosting
wrapped in a plastic. Its weight is 2kg, and piled with a 15-10mm
the cabinet and maintain excellent freezing effect.
clearance among them in order to keep convection of the air inside
Avoid putting beverage cans and containers in the freezer to prevent
1) Unplug the unit. Take out all contents of the freezer. After the
freezer temperature rises,frost will melt or scale off.
2)
To speed up defrosting, place a pan of hot water into the unit and
close the door. After defrosting, drain the water and then use a
soft cloth to dry the interior walls. Plug unit and resume operation.
Note: Never use Sharp object to scrape off frosting layers.
In normal using conditions, power interruption should be avoided.
five minutes to avoid damages to compressor.
Care & cleaning
Should power be interrupted accidentally, do not put power on for
It is suggested that the freezer be cleaned periodically; generally
for cleaning any parts of the chest freezer. Dry it with a soft cloth.
Never use water to rinse the freezer.
clean it every 30~45 days.Unplug before cleaning, and use soft cloth
of the cabinet. Do not use acids, chemical thinner, gasoline or benzene
with neutral soap water or mid detergent to scrub inside and outside
Forbid
Forbid
11
1
2
3
4
5
6
7
8
1.Door lock 5.Swirl caster
2.Foam door 6.Control panel
3.Fruit basket 7.Brand plate
4.Foam body 8.Light (optional)

General Information Installation
fully-closed refrigerating compressor and interior evaporator,
properly processed with a good cooling result, it is convenient
for use,quiet and saves on electricity.
The hard polyaminoester foam(made from spot high-pressured
foaming)is used for the thermal insulation which results in good
performance and durability.
-4- -5-
Do not place the freezer in direct sun
The refrigerating system for this freezer is mainly composed of
a) embossed aluminium sheet, b) White coating aluminium sheet.
It results in a generally good, clean-looking, and durable unit.
The interior door case is non-poisonous and odorless,and formed
by easy-to -clean ABS plastic. It is made of a specially treated :
The cabinet and door are made of cold-rolled sheets
which have been bonderized and electrostatic-painted, is consistent
in thickness, corrosion-resistant, flexible and scratch-resistant.
The chest freezer should be placed
The unit must be level
on a flat and level surface. Leveling can
be obtained by adjusting screws on the
bottom of the unit
Proper air circulation
A space of approx 10cm is recommended
Also there should be minimum 100 cm.
Free space above the top. These points
are necessary for good air circulation
and door opening.
Avoid heat source
light or close to source of heat such
as a gas range or an electric cooker.
Avoid moisture and rain
Correct electricity voltage
Do not place the freezer close to the
sink or wash bowl as these areas have
high humidity and may cause condensation
on the freezer. Also avoid the rain.
Make sure that the input voltage is the
rated voltage which is specified in the
overloading of your domestic power
circuits.
Wiring diagram to prevent possible
To prevent voltage drop in the power
appliance from the same wall socket.
going to the chest freezer, plug straight
into a wall socket. Do not use any electrical
between the back of the freezer and the
wall .