EGO EasyPro Series User manual

EasyProSeries
User manual
EasyPr o-P1.8 / P2 / P2.5

- 1 -
CON TENT
1 PRODUCT OVERVIEW ................................................................................................................................................... - 5 -
1.1 Product Features ....................................................................................................................................................... - 5 -
1.2 Product Specification ............................................................................................................................................... - 6 -
1.3 Panel size ..................................................................................................................................................................... - 7 -
1.4 Module size ................................................................................................................................................................ - 7 -
2 PRODUCT COMPONETS .............................................................................................................................................. - 8 -
2.1 Panel ............................................................................................................................................................................. - 8 -
2.2 Accessories ................................................................................................................................................................. - 9 -
3 Preparations before installation ............................................................................................................................. - 10 -
3.1 Tools for installation ............................................................................................................................................. - 10 -
3.2 On-site environment requirements ................................................................................................................. - 11 -
3.3 Precautions for product installation ................................................................................................................ - 11 -
4 PRODUCT INSTALLATION ........................................................................................................................................ - 13 -
4.1 Main power cable .................................................................................................................................................. - 13 -
4.2 Installation instructions ........................................................................................................................................ - 14 -
5. PRODUCT MAINTENANCE ....................................................................................................................................... - 16 -
5.1 Panel maintenance ................................................................................................................................................ - 16 -
5.2 Module/receiving card/PSU maintenance ..................................................................................................... - 17 -

- 2 -
WARNING: Be sure to understand and follow all safety guidelines, safety instructions, warnings
and precautions listed in this manual. This product is for professional use only!
This product may result in serious injury or death due to fire hazard, electric shock, and crushing
hazard.
Please read this manual carefully before installing, powering up, operating and maintenance of
this product. Follow safety instructions in this manual and on the product. If you have any
questions, please seek help from EGO Display.
Beware of Electric Shock!
• To prevent electric shock the device must be properly grounded during installation. Do not
ignore using the grounding plug, or else there is a risk of electric shock.
• During a lightning storm, please disconnect the device’s power supply, or provide other suitable
lightning protection. If the equipment is not in use for a long time, please unplug the power cable.
• When performing any installation or maintenance work (e.g. removing the fuses, etc.,) make
sure to turn off the master switch.
• Disconnect AC power when the product is not in use, or before disassembling, or installing the
product.
• The AC power used in this product must comply with local building and electrical codes, and
should be equipped with overload and ground fault protection.
• The main power switch should be installed at a location near the product and should be clearly
visible and easily reac hed. This way in case of any failure the power can be promptly
disconnected.
• Before using this product check all electrical distribution equipment, cables and all connected
devices, and make sure all meet current requirements.
• Use appropriate power cables. Please select the appropriate power cable accableing to the
required power and current capacity, and ensure the power cable is not damaged, aged or wet. If
any overheating occurs, replace power cable immediately.
• For any other questions, please co nsult a professional.
Beware of Fire!
• Use a circuit breaker or fuse protection to avoid fire caused by power supply cables
overloading.
The following marks on the product and in this manual indicate important safety measures.

- 3 -
• Maintain good ventilation around the display screen, controller, power supply and other devices,
and keep a minimum 0.1 meter gap with other objects.
• Do not stick or hang anything on the screen.
• Do not modify the product, do not add or remove parts.
• Do not use the product in case ambient temperature is over 55 ℃.
Beware of Injury!
• Warning: Wear a helmet to avoid injury.
• Ensure any structures used to support, fix and connect the equipment can withstand at least 10
times the weight of all the equipment.
• When stacking products, please hold products firmly to prevent tipping or falling.
• Ensure all components and steel frames are securely installed.
• When installing, repairing, or moving the product, ensure the working area is free of obstacles,
and ensure the working platform is securely and stably fixed.
• In the absence of proper eye protection, please do not look directly at the lit screen from within
a 1 meter distance.
• Do not use any optical devices that have converging functions to look at the screen to avoid
burning the eyes.
WARNING: Beware of suspended loads.
LED lamps used in the module are sensitive and can be damaged by ESD (electrostatic
discharge). To prevent damage to LED lamps, do not touch when the device is running or
switched off.
WARNING: The manufacturer shall not bear any responsibility for any incorrect, inappropriate,
irresponsible or unsafe system installation.
Product Disposal
• Any component that has a recycling bin label can be recycled.
• For more information on collecting, reusing and recycling, please contact the local or regional
waste management unit.
• Please contact us directly for detailed environmental performance information.

- 4
Warning: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the e quipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in ac cableance with the instruction
manual, may cause harmful interference to radio communications. Oper ation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense
-

- 5 -
1 PRODUCT OVERVIEW
The EasyPro series is an indoor high-definition fixed display specia lly developed for the commercial
display market. It features all -in-one minimalist design and convenient installation. The size of the
panel is 320x480mm, and the control card and power supply unit are integrated inside. The whole
panel is pre-installed an d shipped. It can be quickly spliced to complete 2K, 4K, and 8K large-screen
splicing. It is especially suitable for application scenarios such as lobbies, lecture halls, and exhibitions.
Products are mainly used in: corporate lobbies, exhibition halls, meeting rooms, brand chain stores,
shopping plazas, hotel banquet halls, banks, churches, theaters, high-end clubs, museums,
transportation hubs, airports, stations and other applications.
1 .1 Product Features
l All-in-one：integrated design , pre-installed and delivered, no secondary assembly is required.
l Quick installation：magnetic installation, which simplifies the traditional way of installation.
l Neat wiring and easy maintenance：easy to operate the signal cable and power cable
cascade
lLow light and high gray, refresh rate up to 3840Hz
l Module-level size adjustment: Both 320*480 and 320*320 size are available.
lEfficient maintenance： full front ser vice with vacuum tool

- 6 -
1.2 Product Specification
Parameter 1.8 2 2.5
physical
parameter
LED type SMD1515 black SMD1515 black SMD151 5 black
Pixel pitch (mm) 1.86 2 2.5
Panel size
(W×H×D)/(mm) 320×480×55 320×480×55 320×480×55
Panel resolution 172x258 160x240 128×192
Panel weight(㎏) 2.3 2.4 2.1
Module size (W×H)/(mm) 320×160 320×160 320×160
photoelectric
parameter
Brightness（nit） 500 500 500
Refresh rate（Hz） 3840 3840 3840
Gray scale（bit） 1 4 1 4 14
Contrast Ratio 3000:1 3000:1 3000:1
Color temperature（K） 8300 8300 8300
Viewing angle（H/V）（°） 160/140 160/1 40 160/1 40
Driving type 1/43 1/40 1/32
AC Operating Voltage (V) 1 00~240 1 00~240 1 00~240
Power Consumption
(Max./Avg.)(W/m²) 320/107 325/108 330/110
Application
Parameter
Storage Temperature（℃） ﹣40~﹢60
Operating Temperature
（℃）
﹣10~﹢40
Storage Humidity（RH） 10﹪~85﹪
Operating Humidity（RH） 10﹪~80﹪
LED Lifetime（H） 100000
Maintenance Front
Installation Front
Certification CCC/CE/FCC/ETL/ROHS/UKCA
Note: Power consumption tolerance: ±15%, according to the actual situation.

- 7 -
1 .3 Panel size
（side view and rear view, unit: mm）
1 .4 Module size
（front view, unit: mm）

-8 -
2.2 Accessories
Signal cable ：
T-type power cable ：
Power cable to LED wall ：The length will be configured according to the client's requirements
2 PRODUCT COMPONETS
2.1 Panel
Location for safety
rope (optinal)
Module
Power supply and
receiving car d
R ear cover

-9 -
3 Preparations before installation
3.1 Tools for installation
TOOL
LIST
Tool type Function Picture
Knife Open the package
Vacuum front
service tool
panel front service
tool
Needle nose
pliers
Adjust the flatness by
PH2 screwdriver
Maintenance and
disassembly
Module & power supply
& receiving card screws
PH2 screwdriver
Maintenance and
disassembly
Module & power supply
& receiving card screws
Laser level
Measuring installation
position
Spirit level
Check the flatness of the
cabinet installation
tape measure Measure the distance

-10 -
3.2 On-site environment requirements
1. Narrow pixel pitch series products need to test the field temperature and humidity before
installation, ensure that the temperature is within 35 ℃, humidity within 70%RH can be installed;
2. For the environment temperature higher than (35℃, 70%RH), the screen under high temperature
and humidity, will make the LED lamp bead there is a hidden danger of moisture, resulting in a large
number of LED lamp bead damag e screen body;
3.3 Precautions for product installation
3.3.1 Before installation
1. Determine the power distribution scheme:
Determine the specific power distribution scheme according to the actual display size and sequence, and
determine the specifications and quantity of power cables for the distribution box and main power cables,
and the number of power cables connected to the box. According to the total pixel points and
arrangement order, determine the number of sending box, video processor specificati ons, the number of
network cables.
2 . Power distribution precautions
(1) Wiring is neat, horizontal and vertical, non-cable routing must be laid groove or line tube;
(2) Signal cables and power cables are laid separately to avoid interference;
(3) Wiring considering the three-phase power balance, as far as possible each phase of the load display
box number is equal;
(4) The cable head needs to press the wire terminal.
(5) Wire head coding, the overall distribution diagram should be consistent with the actu al wiring,
convenient follow-up troubleshooting;
(6) Under the premise of considering the safe load rate, the cable between the distribution box and the
display box is arranged according to the actual box arrangement;
(7) Long distance wiring, considering the line loss voltage, to ensure that the display end voltage in the
allowable range;
3. Construction of steel structure: according to the requirements of the drawings. Construction shall be
combined with pipeline construction and supervised by the person in charge of installation.
4. Tools: Prepare tools commonly used for installing the display, such as screwdrivers, wrenches, and
multimeters.
3.3.2 During installation
1 . Distribution box installation: distribution box installation must be firm and reliable. Reliable grounding
protection.
2. Panel installation: Equipment handling. Adequate manpower must be provided to ensure safety. Handle
with care to avoid damage to the appearance and function of the Panel. When installing the display screen,
check whether the magnet feet are tightened. When connecting the power cable and network cable, check
whether the power cable is in place and correct, whether the network cable is inserted in place, and
whether the sequence of connecting the screen is correct.

-11 -
3. Wiring sequence: Connect the Panel with the connecting box power cable first, and then connect the box
with the 3 main power cable from the distribution box or socket to the bottom bo x.
4. Power connection: First confirm that the power supply end is in the "off" state, must use the electrical
end to start the connection (set a switch or distribution box, etc.). After checking the connection of the
power end, connect the power supply end. First connect the protection ground, then connect the neutral
line, and finally connect the phase line. After the power supply is connected, check the power switch or the
distribution voltage of the device, and then disconnect the power supply. The power source line must be
differentiated according to the color of the ground line, neutral line and A, B, C isophase line .
5. box adjustment: check whether the display is smooth and clean. Fine- tune the gaps between modules
and between boxes. During installation, the boxes must be locked with screws to ensure the right and
left/up and down flatness between the boxes.
6. Power test: Before supplying power to the whole screen and providing control signals, please carefully
check whether the power supply and signal line are correctly connected; Carefully check the L, N, and PE
cables on the AC power input ports of each box to ensure that there is no short circuit among them
(measure with a multimeter).
7. Power-on detection: fault judgment, check the appearance of powe-ron detection whether there is a
bad screen, text output is correct; If there is a fault, according to the phenomenon of the fault, to judge,
troubleshoot.
8. Module protection: During the installation of the LED module, the edges and corners of the module
should be well protected to avoid the collision resulting in the loss of lights. When installing the module,
wear dust-free gloves to avoid perspiration or dust on the surface of the modu le.
9. Display protection: In the process of installation and construction, dust collector should be used to
reduce the dust concentration. After construction, clean canvas must be used to cover the large screen
lamp surface to avoid dust and corrosive gas invading the lamp beads.

-12 -
4 PRODUCT INSTALLATION
4.1 Main power cable
Preparation before connection
Before connecting: Before supplying power to the entire screen, check whether the power cables are
connected between boxes and whether the main power cables are correctly connected between the screen
and the distribution box. Check the L, N, and PE cables on the AC power input port s of each box and
ensure that there is no short circuit among them (measured with a multimeter ).
Power cable connection NOTE Select a proper power distribution box or socket based on the maximum
power consumption. For details about the matching scheme, con tact your electrician or PDC manufacturer.
The input voltage of the box is 100-240V/AC, and the power cable between the distribution box and the
box is 3X1.5mm². Please confirm the input voltage. The number of boxes carried by each power cable
varies with different voltages and different product models. .
Our distribution box is divided into 15KW, 30KW, 60KW, 90KW, 120KW, 150KW, 180KW and so on .
According to the control mode, there are intelligent distribution box and ordinary distribution bo x.
According to the use type, it can be divided into solid assembly electrical box and leased distribution bo x.
Distribution box and main cable selection
Distribution box Specifications 15KW 30KW 45KW 60KW
International copper core cable type mm² 4*4+1*2.5 4*10+1*6 4*16+1*10 4*25+1*16
Distribution box Specifications 90KW 120 KW 150 KW 180 KW
International copper core cable type mm² 4*50+1*35 4*70+1*35 4*95+1*50 4*120+1*70
Remarks:
The above table takes three-phase voltage 380V and single-phase voltage 220V as an example.
Distribution box input terminal is three-phase five-wire system, three-phase voltage 380V, output terminal is
single-phase voltage 220V;
The meaning of 4*X+1*X in the table: 4 represents L+L+L+N wire, 1 represents PE wire, and X represents the
size of the main cable.
If the single-phase voltage is 110V, the international copper core cable type must be double;

-13 -
Product Model
Number
Standard box size
(mm)
Power
consumption
(maximum)
Power cable
with load (220V) with load (110V)
EasyPro-P1.8 320x480x55 320 W/ ㎡ 36 18
EasyPro-P2 320x480x55 325 W/ ㎡ 35 17
320x480x55 330 W/ ㎡ 35 17
4.2 Installation instructions
Product installation type
Installation type Remark
1 Steel structure magnetic
installation
After wiring, install the cabinets on the steel structure by
magnets
（third-party steel structure reference）
EasyPro-P2.5

- 14 -
（Installation instruction）
（Rear view after installation）

- 15
5. PRODUCT MAINTENANCE
5.1 Panel maintenance
EasyProseries containers can be quickly removed using a vacuum adsorption tool 3- 5 seconds.
Attach the front maintenance tool to the surface of the container to be removed, press a switch, and
pull out the maintenance tool for 3-5 seconds.
graphic
Maintenance
Procedure
Locate the faulty
enclosure and place the
maintenance tool in the
middle of the faulty module
before vacuuming
Press the switch and continue
for 3- 5 seconds. Carefully
remove the box with a little
outward force perpendicular to
the display surface, and remove
the power cord and network
cable of the box.
After replacement, gently
install it on the screen body in the
upward direction.
Precautions
The CP series maintenance tool can only use th me lootecnanetnia
revossorctonnacdnaxobelgnisafoaeraelddimehtnidecalpebdluohslootecnanetniamremrofehT
to adjacent modules (if the location cannot be determined, you can enable Mapping to
the location).
After removing the container from ntfelruoyhtiwreniatnocehtdloh,neercseht ha d to prevent the
module from falling due to power supply of the maintenance tool or closed switch. In the
process of disassembly and assembly, attention should be paid to careful operation to avoid bumping
the pmalehtgnigamaddnasrenroceludom bead.
for

-16 -
5.2 Module/receiving card/PSU maintenance
Module maintenance Picture
Use the maintenance tool to remove the box.
Use the Phillips screwdriver of PH2 to remove the
four screws from the rear cover of the container .
The module can be replaced directly after removing
the aluminum plate and fixing screws on one side of the
module using PH2.
Note: The direction of the aluminum plate cannot
be reversed
receiving card Picture
 Use the maintenance tool to remove the box.
 Use the Phillips screwdriver of PH2 to remove the
four screws from the rear cover of the container.
 Remove the cable from the receiving card, and use
the Phillips screwdriver of PH2 to remove the three
screws to maintain the receiving card
Power maintenance Picture
Use the maintenance tool to remove the box.
Use the Phillips screwdriver of PH2 to remove the
four screws from the rear cover of the container .
Use a PH2 to remove the screws fastening the 5V
cable, and then use an M3 external hexagon Phillips
screwdriver to remove the three M3 nuts fastening
the power supply.
Note: Do not knock the pin at the connection
between the power supply and the receiving card