EGO SNT2100 User manual

OPERATOR'S MANUAL
56-VOLT LITHIUM-ION
CORDLESS
SNOW BLOWER
MODEL NUMBER SNT2100
WARNING: To reduce the risk of injury, the user must read and understand the
Operator’s Manual before using this product. Save these instructions for future reference.
16-0617_EGO_SNT2100 _Snow Blower_Manual_NA_V7
Español p. 73
Français p. 35

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT21002
TABLE OF CONTENTS
Safety Symbols ..........................................4
Safety Instructions......................................5-6
Safe Operation Practices for Walk-behind Snow Blower.........6-9
Specications ..........................................10
Description .........................................11-12
Assembly ...........................................13-16
Operation ...........................................17-25
Maintenance ........................................26-30
Troubleshooting .........................................31
Warranty ...........................................32-33

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2100 3
READ ALL INSTRUCTIONS!
READ & UNDERSTAND
INSTRUCTION MANUAL
WARNING: Some dust created by power cutting contains chemicals known to
the state of California to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
 Lead from lead-based paints
 Crystalline silica from bricks and cement and other masonry products, and
 Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as those dust masks that are specially
designed to lter out microscopic particles.

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT21004
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention to possible dangers. The
safety symbols and the explanations with them deserve your careful attention and
understanding. The symbol warnings do not, by themselves, eliminate any danger.
The instructions and warnings they give are no substitutes for proper accident
prevention measures.
WARNING: Be sure to read and understand all safety instructions in this
Operator’s Manual, including all safety alert symbols such as “DANGER,” “WARNING,”
and “CAUTION” before using this tool. Failure to follow all instructions listed below may
result in electric shock, re, and/or serious personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, or CAUTION.
May be used in conjunction with other symbols or pictographs.
WARNING: The operation of any power tools can result in
foreign objects being thrown into your eyes, which can result in severe
eye damage. Before beginning power tool operation, always wear
safety goggles or safety glasses with side shields and a full face shield
when needed. We recommend a Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with side shields. Always use
eye protection which is marked to comply with ANSI Z87.1.

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2100 5
SAFETY INSTRUCTIONS
This page depicts and describes safety symbols that may appear on this product.
Read, understand, and follow all instructions on the machine before attempting to
assemble and operate.
Safety Alert Indicates a potential personal injury hazard.
Eye Protection
Always wear safety goggles or safety glasses
with side shields and a full face shield when
operating this product.
Read Operator’s
Manual
To reduce the risk of injury, user must read
and understand operator’s manual before
using this product.
DANGER —
Keep Hands
Away from the
Impeller
Do not use hands to unclog the chute.
Keep Feet Out of
Impeller Keep feet away from rotating impeller
Recycle Symbols
This product uses Lithium-ion (Li-ion)
batteries. Local, state, or federal laws may
prohibit disposal of batteries in ordinary
trash. Consult your local waste authority for
information regarding available recycling and/
or disposal options.
IPX4 Ingress Protection
Degree Protection from splashing water
V Volt Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
WWatt Power

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT21006
min Minutes Time
Alternating
Current Type of current
Direct Current Type or a characteristic of current
n0No-Load Speed Rotational speed, at no load
... /min per Minute Revolutions per minute
WARNING: To ensure safety and reliability, all repairs should be performed by a
qualied service technician.
SAFE OPERATION PRACTICES FOR WALK-BEHIND
SNOW BLOWER
DANGER: This snow blower is capable of amputating hands and feet and
throwing objects. Failure to observe the following safety instructions could result in
serious injury.
FOR ALL SNOW BLOWERS
 Do not use on graveled surface.
 Keep Children Away – All visitors should be kept a safe distance from work area.
 Dress Properly – Do not wear loose clothing or jewelry. They can be caught in
moving parts.
 Wear rubber boots when operating the snow blower.
 Keep hands away from moving parts.
 Keep guards in place and in working order.
 Don’t Force Snow Blower – It will perform better and safer at the rate for which it
was designed.
 Don’t Overreach – Keep proper footing and balance at all times.

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2100 7
 If the snow blower strikes a foreign object follow these steps:
1) Stop snow blower. Release the switch.
2) Remove the battery pack(s).
3) Inspect for damage.
4) Repair any damage before restarting and operating the snow blower.
 Store Idle Snow Blowers Indoors-When not in use, snow blowers should be stored
indoors in dry, locked-up place – out of reach of children.
 Maintain Snow Blowers with Care – Following instructions for lubricating and
changing accessories.
TRAINING
 Read, understand and follow all instructions on the machine and in the
manual(s) before operating this unit. Be thoroughly familiar with the controls and
the proper use of the equipment. Know how to stop the unit and disengage the
controls quickly.
 Never allow children to operate the equipment. Never allow adults to operate the
equipment without proper instruction.
 Keep the area of operation clear of all persons, particularly small children.
 Exercise caution to avoid slipping or falling, especially when operating the snow
blower in reverse.
PREPARATION
 Thoroughly inspect the area where the equipment is to be used and remove all
doormats, sleds, boards, wires, and other foreign objects.
 Do not operate the equipment without wearing adequate winter garments. Avoid
loose-tting clothing that can get caught in moving parts. Wear footwear that will
improve footing on slippery surfaces.
 Never attempt to make any adjustments while the motor is running (except when
specically recommended by manufacturer).
 Always wear safety glasses or eye shields during operation or while performing
an adjustment or repair to protect eyes from foreign objects that may be thrown
from the machine.

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT21008
OPERATION
 Do not put hands or feet near or under rotating parts. Keep clear of the discharger
opening at all times.
 Exercise extreme caution when operating on or crossing gravel drives, walks, or
roads. Stay alert for hidden hazards or trafc.
 After striking a foreign object, stop the motor, remove the battery pack(s),
thoroughly inspect the snow blower for any damage, and repair the damage
before restarting and operating the snow blower.
 If the unit should start to vibrate abnormally, stop the motor and check
immediately for the cause. Vibration is generally a warning of trouble.
 Stop the motor whenever you leave the operating position, before unclogging
the auger assembly housing or discharge chute, and when making any repairs,
adjustments or inspections.
 When clearing, repairing or inspecting the snow blower, stop the motor and make
certain the auger assembly and all moving parts have stopped. Remove the
battery pack(s) to prevent someone from accidentally starting the motor.
 Exercise extreme caution when operating on slopes.
 Never operate the snow blower without proper guards and other safety protective
devices in place and working.
 Never direct the discharge toward people or areas where property damage can
occur. Keep children and others away.
 Do not overload the machine capacity by attempting to clear snow at too fast a
rate.
 Disengage power to the auger assembly when snow blower is transported or not
in use.
 Use only attachments and accessories approved by the manufacturer of the snow
blower (such as rubber paddles, scraper bar and drive belt).
 Never operate the snow blower without good visibility or light. Always be sure of
your footing, and keep a rm hold on the handles. Walk; never run.

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2100 9
 Use only with the battery packs and chargers listed below:
BATTERY PACK CHARGER
BA1120, BA1400, BA2240
BA2800, BA4200
CH2100
CH5500
NOTICE: For best performance, recommend for use with 2pcs 4.0Ah or higher Ah batteries.
CLEARING A CLOGGING DISCHARGE CHUTE
Hand contact with the rotating auger assembly inside the discharge chute is the most
common cause of injury associated with snow blowers. Never use your hand to clean
out the discharge chute.
To clear the chute:
 SHUT THE MOTOR OFF!
 Wait 10 seconds to be sure the auger assembly blades have stopping rotating.
 Always use a clean-out tool, not your hands.
MAINTENANCE AND STORAGE
 Check all bolts or fasteners at frequent intervals for proper tightness to be sure
the equipment is in safe working condition.
 Always refer to operator’s manual for important details if the snow blower is to be
stored for an extended period.
 Maintain or replace safety and instruction labels, as necessary.
 Run the machine a few minutes after blowing snow to prevent freeze-up of the
auger assembly.
SAVE THESE INSTRUCTIONS. Refer to them frequently and use them to instruct others
who may use this tool. If you lend this tool to someone else, also lend these instructions
to them to prevent misuse of the product and possibly injury.

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT210010
INTRODUCTION
Congratulations on your selection of a new generation of 56V Lithium-Ion powered
snow blower. It has been designed, engineered and manufactured to give you the best
possible dependability and performance.
Should you experience any problem you cannot easily remedy, please contact EGO
customer service center 1-855-EGO-5656.
This manual contains important information on to the safe assembly, operation and
maintenance of your snow blower.
Read it carefully before using the tool. Keep this manual handy so you can refer to it at
any time.
SERIAL NUMBER _____________________ DATE OF PURCHASE _________________
THE MODEL AND SERIAL NUMBERS WILL BE FOUND ON A LABEL ATTACHED ON AUGER
ASSEMBLY HOUSING.
YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP IN A SAFE
PLACE FOR FUTURE REFERENCE. SAVE YOUR SALES RECEIPT.
SPECIFICATIONS
Voltage 56V DC
Clearing Width 21"
Intake Height 13"
Throwing Distance Up to 35 ft.
Wheel Size 7"
Snow Blower Weight (Without battery pack) 24.2 kg

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2100 11
DESCRIPTION
1Handle
Safety Button
Variable-Auger-
Speed Adjustment
Side Rail
Rear Handle
Quick-Release
Lever
Back Housing
Main Housing
Wheels
Drive-Belt Cover
Bail Switch (Switch Lever)
Front Metal Deck
LED Headlights Battery-Release Button
Switch Button for
LED Headlights
Power
Indicator
Electric
Contact
Steel Auger Shaft
Rubber Paddle
Chute Deector
Chute-Deector Handle
Battery Cover
Knobs
Chute-Rotation Handle
Scraper Bar
WARNING: The safe use of this product requires an understanding of the
information on the tool and in this operator’s manual, as well as knowledge of the project
you are attempting. Before use of this product, familiarize yourself with all operating
features and safety rules.

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT210012
Safety Button
The safety button must be pressed down before the motor can be started.
Bail Switch
The bail switch is located on the upper handle of the snow blower. The switch
engages and disengages the motor and auger.
WARNING: The bail switch and the safety button are safety devices. Never
attempt to bypass their operations.
Electric Brake
Quickly stops auger rotation when the bail switch is released.
Quick-Release Lever
Locks/unlocks the side rails for working or storage positions.
Variable-Auger-Speed Adjustment
Adjusts the auger speed in order to adjust the throwing distance.
Chute-Rotation Handle
Rotates the chute so that the user may direct the discharged snow as desired. The
handle allows the chute to rotate 90° (left) to 90° (right).
Chute-Deector Handle
Adjusts the angle of the chute and the height of the discharge stream.
LED Headlights
The LED headlights are located on the front of the unit. This feature provides extra light
for increased visibility.

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2100 13
ASSEMBLY
WARNING: To prevent accidental starting that could cause serious personal
injury, always remove the battery pack(s) from the tool when assembling parts.
WARNING: If any parts are damaged or missing, do not operate this product
until the parts are replaced. Use of this product with damaged or missing parts could
result in serious personal injury.
WARNING: Do not attempt to modify this tool or create accessories not
recommended for use with this product. Any such alteration or modication is misuse
and could result in a hazardous condition leading to serious injury.
UNPACKING
 Grasp the rear handle and the front part of the product at the same time to
carefully lift the tool up and out of the carton. Remove any other accessories from
the carton. Make sure that all items listed in the packing list are included.
WARNING: Do not use this product if any parts on the packing list are already
assembled to your product when you unpack it. Parts on this list are not assembled to
the product by the manufacturer and require customer installation. Use of a product
that may have been improperly assembled could result in serious personal injury.
 Inspect the product carefully to make sure that no breakage or damage occurred
during shipping.
 Do not discard the packing material until you have carefully inspected and
satisfactorily operated the tool.
 If any parts are damaged or missing, please return the product to the place of
purchase.
LIST OF CONTENTS
PART NAME QUANTITY
Snow Blower 1
Discharge Chute 1
Operator’s Manual 1
Hex Wrench 1

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT210014
UNFOLDING/FOLDING THE
SIDE RAILS
WARNING: Do not attempt to start
the snow blower when the side rails are
folded down.
To unfold the side rails
1. Your snow blower is shipped with
the side rails in the compact, locked
position (Fig. 2).
2. Open the quick-release levers on
both sides and gently pivot the side
rails upwards until they come to a
stop (Fig. 3 & 4).
3. Close the quick-release levers and
then tighten the knobs to secure the
side rails in place (Fig. 5).
2
4
3
5
12

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2100 15
To fold the side rails
1. Push the chute-rotation handle all
the way forward so that the chute is
facing left as you stand behind the
snow blower. Squeeze the trigger on
the chute deector handle to tilt it all
the way down (Fig. 6).
2. Open the quick-release levers on
both sides to fold the side rails into
the storage position (Fig. 7). 7
1
2
61
2

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT210016
INSTALLING THE CHUTE
1. Use the supplied hex wrench to
loosen the two bolts in the chute
housing and remove them (Fig. 8).
2. Align the grooves of the chute with the
slot on the chute housing, and then
push the chute into place (Fig. 9).
3. Use the hex wrench to lock the chute
in place with the two bolts (Fig. 10).
WARNING: Using the chute-
rotation handle located at the operator’s
position, make sure that the chute rotates
properly with the discharge opening never
crossing operator controls.
WARNING: Never operate the
snow blower without the complete
discharge chute in place.
8Chute
Housing
9
Slot on
the Chute
Housing
Groove of the Chute
10

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2100 17
OPERATION
WARNING: Do not allow familiarity with this product to make you careless.
Remember that a careless fraction of a second is sufcient to inict serious injury.
WARNING: Always wear eye protection with side shields marked to comply with
ANSI Z87.1. Failure to do so could result in objects being thrown into your eyes and
other possible serious injuries.
WARNING: Do not use any attachments or accessories not recommended by the
manufacturer of this product. The use of attachments or accessories not recommended
can result in serious personal injury.
APPLICATION
You may use this product for purpose listed below:
Removing snow from areas such as driveways and sidewalks.
TO ATTACH/DETACH THE BATTERY PACK
CHARGE BEFORE FIRST USE.
NOTE: For best performance, we recommend use with two 4.0Ah EGO 56V Arc-
Lithium batteries or with two EGO 56V Arc-Lithium batteries of greater capacity.
When not in use, 56V battery packs should be stored in an enclosed area where the
temperature will not drop below -4°F (-20°C). Optimal charging temperatures are
between 32°F (0°C) and 104°F (0°C - 40°C).
WARNING: If any parts are broken or missing, do not attempt to attach the
battery packs to the snow blower or operate the snow blower until the broken or
missing parts are replaced. Failure to do so could result in serious injury.
1. The battery cover is hinged. Raise the battery cover by lifting the front of the
cover.
2. The snow blower is equipped with two battery compartments, which
accommodate two battery packs at the same time.

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT210018
3. Align the grooves in the battery
pack with the raised ribs in one
of the battery compartments, and
then insert the battery pack into the
compartment (Fig. 11).
4. Push the battery pack until you hear
a “click”. The battery-release button
will spring up when the battery pack
is securely attached.
5. Attach the other battery pack into
the other battery compartment in
the same way.
6. To detach the battery pack, depress
the battery-release button to release
the battery pack, and then lift it out
of the compartment (Fig. 12).
7. Close the battery cover.
NOTICE: Make sure that the latch on
the snow blower snaps into place and that the battery pack(s) are secured to the unit
before starting operation.
STARTING/STOPPING THE SNOW BLOWER
CAUTION: Do not attempt to override the operation of the safety button and bail
switch.
WARNING: The operation of a snow blower can result in foreign objects being
thrown into your or others’ eyes, which can damage eyes severely. Always wear safety
glasses while operating the snow blower or while performing any adjustments or repairs
on the snow blower.
WARNING: Ensure that other people and pets remain at least 100’ (30m) away from
the snow blower when it is in use.
11 Install Battery
Battery-
Release
Button
Battery
Compartment
Battery Cover
12 Remove Battery
2
1

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT2100 19
WARNING: The auger will continue to rotate for a few seconds after the snow
blower is turned off. Allow the auger to stop rotating before starting it again.
NOTICE: Do not rapidly turn the snow blower off and on.
To Start the Snow Blower
1. Ensure that the side rails are
securely locked in the unfolded,
open position.
2. Attach the battery pack(s) to the
snow blower and close the battery
cover.
NOTICE: Make sure that the latch on the
snow blower snaps into place and that the
battery pack(s) are secured to the snow
blower before operation.
3. Depress the safety button and, with
the button depressed, pull the bail
switch upward to meet the handle
(Fig. 13 &14).
4. Once the tool powers on, release the
safety button and begin operation
(Fig. 15).
NOTICE: The tool is started by
depressing the safety button rst,
followed by squeezing the bail switch; the
reverse operation will not start the tool.
NOTICE: The snow blower may not
properly start if its battery temperature
is -4°F (-20°C) or less. If unit doesn’t
start, remove the battery from the snow
blower and allow it to warm indoors for
10 minutes or longer. Reinstall the battery and try again.
21
13
15
14
1
2

56V LITHIUM-ION CORDLESS SNOW BLOWER — SNT210020
To Stop the Snow Blower
1. Fully release the bail switch (Fig. 16).
2. The electric brake in the Automatic
Braking Mechanism will stop the
auger rotation within 3 seconds of
the bail-switch release.
Variable-Auger-Speed System
(Fig. 17)
The speed of the auger can be adjusted to
control the throwing distance.
1. To increase the speed, move the
variable-auger-speed adjustment
forwards.
2. To decrease the speed, move the
variable-auger-speed adjustment
backwards.
ADJUSTING THE CHUTE
The chute can be adjusted to change
both the direction and the distance of the
discharged snow to assist you in moving
snow away from one area and placing it
in another.
The direction of snow removal can be
adjusted up to 180° (Fig. 18).
1. Push the chute-rotation handle forward to rotate the chute to the left.
2. Pull the chute-rotation handle backward to rotate the chute to the right.
16 Bail Switch (Fully released)
Safety Button
(Fully released)
17
Variable-Auger-
Speed Adjustment
18
Chute-
Rotation
Handle
Chute